Hi, On Thu, Jul 22, 2004 at 06:52:07PM +0200, Matthias Saou wrote: > Hi, > > Here's the content of my ifcfg-ctc0 file, it's the post-install default and > seems correct to me : > > # IBM CTC > DEVICE=ctc0 > BOOTPROTO=static > BROADCAST=192.168.200.3 > IPADDR=192.168.200.3 > MTU=1500 > NETMASK=255.255.255.255 > NETWORK=192.168.200.3 > ONBOOT=yes > QETH=yes > REMIP=192.168.200.4 > SUBCHANNELS=0.0.0600,0.0.0601 > TYPE=QETH > One should not do replying when a) in hurry b) knowing that you should have been bed hours ago c) tired (b) For all the other information (which are valid) i wrote about thise before, it seems just that QETH=yes TYPE=QETH Are not valid for this setup. The magic in network-functions get all wrong when CTC is defined as QETH, so it more like should be TYPE=CTC and nuke that 'QETH=yes' line alltogether. As i said, i had valis Tao/s390x setup already when i updated it to FC3/rawhide, so i had all this information on my ifcfg-ctc0 except the SUBCHANNELS-line which i had to dig out for 2.6-series. Actually i remember testing just 2.6-kernel over Tao/s390x before i started to 'follow the future'. I should have spotted this little detail immetiatedly, but i didn't, so sorry about that ..... -- Pasi Pirhonen - upi@xxxxxx - http://iki.fi/upi/
