On Wed, Feb 4, 2009 at 3:22 PM, Jeff Spaleta <jspaleta@xxxxxxxxx> wrote:
It is F10. I only updated bluez to 4.28 to see if I could
connect if I used a newer version, but nothing changed.
I can connect the mouse on another computer, also running F10,
but with a different bluetooth adaptor.
However, booting F8, on the same computer where F10 could not
connect, I have no problem connecting my mouse or any other device.
The adaptor which is not working with F10 is:
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
This is what hal outputs:
[cascavel:~] lshal | grep blue
udi = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_0'
bluetooth_hci.address = 0 (0x0) (uint64)
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.subsystem = 'bluetooth' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_0' (string)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/bluetooth/hci0' (string)
2009/2/3 Paulo Cavalcanti <promac@xxxxxxxxx>:
> I upgraded to bluez 4.28, but not has changed.You originally mentioned F10 so I am a bit confused as that bluez
version is from rawhide.
Are you currently running a mix of rawhide and F10 packages?
In F10...the off- the-shelf bluetooth mouse I have also works fine and
its detected via the gnome ui tools.
I have some custom bluetooth devices...i built myself...which I'm
accessing via rfcomm with pybluez...and they work fine. hcitool and
sdptool work as expected for these devices...even though I pieced them
together myself.
It is F10. I only updated bluez to 4.28 to see if I could
connect if I used a newer version, but nothing changed.
I can connect the mouse on another computer, also running F10,
but with a different bluetooth adaptor.
However, booting F8, on the same computer where F10 could not
connect, I have no problem connecting my mouse or any other device.
The adaptor which is not working with F10 is:
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
This is what hal outputs:
[cascavel:~] lshal | grep blue
udi = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_0'
bluetooth_hci.address = 0 (0x0) (uint64)
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.subsystem = 'bluetooth' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_0' (string)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/bluetooth/hci0' (string)
--
Paulo Roma Cavalcanti
LCG - UFRJ
-- fedora-devel-list mailing list fedora-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-devel-list
