On Mon, 2009-01-19 at 17:20 -0700, Linuxguy123 wrote: > I'm doing some embedded development and my flash programmer has a USB > interface. Everything works fine if I program the device as root, but > I'd like to be able to do it as a regular user. I get port permission > errors if I try to run the programmer as a regular user. > > $ lsusb > Bus 002 Device 003: ID 064e:a101 Suyin Corp. Laptop integrated WebCam > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 007 Device 006: ID 15ba:0003 Olimex Ltd. OpenOCD JTAG > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop > Receiver > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial > Port > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 004: ID 07ca:a321 AVerMedia Technologies, Inc. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 003: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + > WLAN) Interface [Integrated Module] > Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint > Sensor > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > My programmer is the Olimex Ltd. OpenOCD JTAG device on bus 7. > > The documentation for the device says it needs access to /proc/bus/usb. > > I can allow regular user access by manually issuing a chown command for > the port, but then I'd have to do it every time I reboot or unplug the > programmer. How do I set it up to happen automatically in F10 ? > > Thanks ! Anyone ? -- fedora-devel-list mailing list fedora-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-devel-list
