On Fri, 4 Feb 2011, Stephen Samuel wrote:
Worst case would be to boot off of a live CD and do an
FSCK that way, but it could take quite a while, and there
is no guarantee that the filesystem will have all of the
parts left to be bootable after that, if FSCK removes a
bunch of critical files -- or the files are already
corrupted.
I'd recommend using another machine (friends or someone
else's) to download and burn a copy of the Ultimate Boot CD:
http://www.ultimatebootcd.com/
There are *lots* of diagnostic and repair utilities on it -
all together on one CD.
If you need to boot a Live linux, then load up Parted
Magic from the UBCD disk(I use the failsafe VGA mode). This
is a complete linux system that runs entirely from memory.
Parted Magic also has Gparted included with it, and a GUI
interface for mounting file systems. If You connected a USB
drive to your system (before running Parted Magic) you could
mount your filesystems and the USB drive, then copy over any
important data files from the possibly corrupt drive to the
USB drive.
Make sure any partitions you create on the USB drive do not
have the *same* partition name as what's on your faulty
system. This could cause a conflict with the fsck program.
For example, if you have a partition on your system with an
e2label called <websites>, then on the USB drive, call it
something else, like <bk-websites> - obviously without the
<> delimiters.
Kind Regards,
Keith Roberts
-----------------------------------------------------------------
Websites:
http://www.karsites.net
http://www.php-debuggers.net
http://www.raised-from-the-dead.org.uk
All email addresses are challenge-response protected with
TMDA [http://tmda.net]
-----------------------------------------------------------------
_______________________________________________
Ext3-users mailing list
Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users
