On Nov 09, 2007 19:11 -0700, Chris Worley wrote:
> How do you measure/gauge/assure proper alignment?
>
> The physical disk has a block structure. What is it or how do you
> find it? I'm guessing it's best to not partition disks in order to
> assure that whatever it's block read/write is isn't bisected by the
> partition.
For Lustre we never partition the disks for exactly this reason, and if
you are using LVM/md on the whole device it doesn't make sense either.
> Then, mdadm has some block structure. The "-c" ("chunk") is in
> "kibibytes" (feed the dog kibbles?), with a default of 64. Not a clue
> what they're trying to do.
That just means for RAID 0/5/6 that the amount of data or parity in a
stripe is a multipe of the chunk size, i.e. for a 4+1 RAID5 you get:
disk0 disk1 disk2 disk3 disk4
[64kB][64kB][64kB][64kB][64kB]
[64kB][64kB]...
> Finally, mkfs.ext[23] has a "stride", which is defined as a "stripe
> size" in the man page (and I thought all your stripes added together
> are a "stride"), as well as a block size.
For ext2/3/4 the stride size (in kB) == the mdadm chunk size. Note that
the ext2/3/4 stride size is in units of filesystem blocks, so if you have
4kB filesystem blocks (default for filesystems > 500MB) and a 64kB RAID5
chunk size, this is 16:
e2fsck -E stride=16 /dev/md0
> It's important to make sure these all align properly, but their definitions
> do.
... do not?
> Could somebody please clarify... with an example?
Yes, I constantly wish the terminology were constant between different tools,
but sadly there isn't any "proper" terminology out there as far as I've been
able to see.
Cheers, Andreas
--
Andreas Dilger
Sr. Software Engineer, Lustre Group
Sun Microsystems of Canada, Inc.
_______________________________________________
Ext3-users mailing list
Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users
