Dear All,
Can somebody help me on the following issue:
When I mount the SCSI device on storage with ext3 filesystem & perform cp
in loop, it becomes readonly.
The steps to reproduce the issue are:
1)Create a ext3 file system on HDLM device
mkfs ?t ext3 /dev/sdn
2)Mount the device
Mount /dev/sddlmaa /home/<dir. name>
3)Execute cp ?f command in a loop on mounted device.
cp -f /root/install.log /home/<dir name>/<file name>
4)Disconnect the path. (Either by plugpull or by disabling the port)
5)When all path become offline device will become read-only.
6)Now again connect the path. Though the status of the path becomes
online, device remains as read-only.
The same scenario I tried on ext2 filesystem but it is not reprocible.
I tried this on AS3 Update6.
Please help me on this. Thanks in advance.
Regards,
Jayjit
_______________________________________________
Ext3-users mailing list
Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users
