Hi,
I'm using ext3 filesystems in embedded devices (storage is on 512Mb or
1Gb CF cards). A typical development cycle would see the filesystem
created on the desktop PC running linux 2.4 (eg. RedHat 9). The CF card
would be installed in the hardware and linux 2.4 (eg. Montavista Pro
3.1, on PPC) would boot from the CF.
Recently I tried a linux 2.6 desktop (CentOS) for the same task and
found problems. Specifically the embedded device won't boot from the CF
anymore. Since we use several partitions it's possible to boot from an
old partition. We can then mount the new partition but attempts to write
to it fail and the partition becomes RO mounted. Here are the logs
associated with those operations:
boot:
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 212k init
�attempt to access beyond end of
device
03:02: rw=0, want=841835629, limit=151200
attempt to access beyond end of device
03:02: rw=0, want=841835629, limit=151200
Kernel panic: No init found. Try passing init= option to kernel.
<0>Rebooting in 180 seconds..
mount/write:
e2fsck 1.35 (28-Feb-2004)
/dev/hda2 has gone 36663 days without being checked, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/hda2: 2297/37848 files (1.9% non-contiguous), 101563/151200 blocks
...
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda2 on /file-system/root2 type ext3 (rw,noatime,errors=remount-ro)
...
# rm -rf /file-system/root2/*
EXT3-fs error (device ide0(3,2)): ext3_free_blocks: Freeing blocks not
in datazone - block = 1752392034, count = 1
Aborting journal on device ide0(3,2).
Remounting filesystem read-only
ext3_reserve_inode_write: aborting transaction: Journal has aborted in
__ext3_jdEXT3-fs error (device ide0(3,2)) in ext3_truncate: Journal has
aborted
ext3_reserve_inode_write: aborting transaction: Journal has aborted in
__ext3_jdEXT3-fs error (device ide0(3,2)) in ext3_orphan_del: Journal
has aborted
ext3_reserve_inode_write: aborting transaction: Journal has aborted in
__ext3_jdEXT3-fs error (device ide0(3,2)) in ext3_delete_inode: Journal
has aborted
rm: cannot unlink `/file-system/root2/bin/chroot': Read-only file system
rm: cannot unlink `/file-system/root2/bin/run-parts': Read-only file system
rm: cannot unlink `/file-system/root2/bin/tempfile': Read-only file system
Looking at the versions, on the 2.4 desktop I have e2fsprogs-1.32-6, on
embedded I have e2fsprogs-1.27-1. On the 2.6 desktop it's e2fsprogs-1.35-12.
I built e2fsprogs-1.38 for the desktop and the result was the same.
I used dumpe2fs on the working and non-working filesystems and found
that the newer FS has different features:
< Filesystem features: has_journal filetype sparse_super
> Filesystem features: has_journal resize_inode filetype sparse_super
After writing to a new FS on the desktop a further feature is added,
< Filesystem features: has_journal resize_inode filetype sparse_super
> Filesystem features: has_journal ext_attr resize_inode filetype
sparse_super
I'm not convinced the features are relevant though because if I mkfs
with -O to restrict the features, the result is the same. I wonder if it
could be an endianness issue?
What should I do to investigate this further? Are there known
incompatabilities with ext3 between different kernels? And are there any
tricks I can use in 2.6 to make a 2.4 compatible filesystem?
Thanks in advance for any help,
-Cam
--
camilo@xxxxxxxxxxxx <--
_______________________________________________
Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users
