FW: IA64 test report: 2.6.8-rc1 /tiger 2004-7-20: Boot Hang!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
Originally, the test is on a tiger with RHEL installed. The fs is ext3 as default.
Then the oops came up.
I've installed the test kernel on another tiger with Suse, reiserfs as default.
The kernel can boot successfully without any trouble.
Is it a known issue? Or what causes this happen?

thanks,
-zhen

-----Original Message-----
From: Wang, Zhenyu Z 
Sent: 2004年7月20日 16:59
To: linux-ia64@xxxxxxxxxxxxxxx
Cc: linux-acpi
Subject: IA64 test report: 2.6.8-rc1 /tiger 2004-7-20: Boot Hang!

 
ACPI Test Report  for 2.6 ia64 kernel 
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	MPT scsi host driver
	Seagate ST318406LC boot drive
	IDE floppy and CDROM
	Serial console
	USB mouse 
	USB keyboard
	Ethernet Pro 1000

Software Configuration:
	1.Bk pull form lia64.bkbits.net/linux-ia64-2.5 on 7/20(Shanghai
time)
	2.bk pull from linux-acpi.bkbits.net/linux-acpi-test-2.6.8 on
7/20(Shanghai time)
	
Kernel Config file:
arch/ia64/defconfig 

ACPI Features Tested: (prioritized).
--------------------	
1. Boot 					_fail_
2. serial console				
3. ATI (run X window system)		
4. usb keyboard				
5. USB mouse				
6. NIC (eg. Ping or ftp)			
7. IDE (eg. r/w floppy or CDROM)	
8. SCI (eg. Press power button)		
9. Soft Power off 			

Linux version 2.6.8-rc1 (root@acpi-tiger) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #1 SMP Tue Jul 20 15:52:29 CST 2004

EFI v1.10 by INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ff84000 ACPI 2.0=0x3ff83000 MPS=0x3ff82000 SMBIOS=0xf0000

ACPI: RSDP (v002 INTEL                                     ) @ 0x000000003ff83000

ACPI: XSDT (v001 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000003ff83090

ACPI: FADT (v003 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000003ff83138

ACPI: MADT (v001 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000003ff83230

ACPI: DSDT (v001  Intel SR870BN4 0x00000000 MSFT 0x0100000d) @ 0x0000000000000000

efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0

efi.trim_top: ignoring 24KB of memory at 0x1000 due to granule hole at 0x0

efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule hole at 0x0

efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule hole at 0x0

efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule hole at 0x0

efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule hole at 0x0

efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hole at 0x0

SAL 3.1: Intel Corp                       SR870BN4                         version 3.0

SAL Platform features: BusLock IRQ_Redirection

SAL: AP wakeup using external interrupt vector 0xf0

iosapic_system_init: Disabling PC-AT compatible 8259 interrupts

ACPI: Local APIC address 0xc0000000fee00000

PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc218) vector 30

register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level

4 CPUs available, 4 CPUs total

Registering legacy COM ports for serial console

MCA related initialization done

On node 0 totalpages: 64121

  DMA zone: 64121 pages, LIFO batch:4

  Normal zone: 0 pages, LIFO batch:1

  HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinux.26  root=/dev/sda2 console=ttyS1,9600n8 console=tty0 ro

PID hash table entries: 2048 (order 11: 32768 bytes)

CPU 0: base freq=199.458MHz, ITC ratio=14/2, ITC freq=1396.209MHz+/--1ppm

Console: colour VGA+ 80x25

Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)

Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)

Memory: 1008192k/1025936k available (7281k code, 17360k reserved, 3306k data, 208k init)

McKinley Errata 9 workaround not needed; disabling it

Calibrating delay loop... 2089.76 BogoMIPS

Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)

Boot processor id 0x0/0xc218

task migration cache decay timeout: 10 msecs.

CPU 1: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 513 cycles)

CPU 1: base freq=199.458MHz, ITC ratio=14/2, ITC freq=1396.209MHz+/--1ppm

Calibrating delay loop... 2089.76 BogoMIPS

CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 513 cycles)

CPU 2: base freq=199.458MHz, ITC ratio=14/2, ITC freq=1396.209MHz+/--1ppm

Calibrating delay loop... 2089.76 BogoMIPS

CPU 3: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 513 cycles)

CPU 3: base freq=199.458MHz, ITC ratio=14/2, ITC freq=1396.209MHz+/--1ppm

Calibrating delay loop... 2089.76 BogoMIPS

Brought up 4 CPUs

Total of 4 processors activated (8359.04 BogoMIPS).

NET: Registered protocol family 16

ACPI: Subsystem revision 20040715

ACPI: Interpreter enabled

ACPI: Using IOSAPIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

ACPI: PCI Root Bridge [PCI1] (00:02)

ACPI: PCI Root Bridge [PCI3] (00:09)

ACPI: PCI Root Bridge [PCI4] (00:0f)

ACPI: Device [CSFF] status [00000008]: functional but not present; setting present

ACPI: PCI Root Bridge [CSFF] (00:ff)

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

PCI: Using ACPI for IRQ routing

GSI 16 (level, low) -> CPU 2 (0xc418) vector 48

ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 48

GSI 19 (level, low) -> CPU 2 (0xc418) vector 49

ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 49

GSI 23 (level, low) -> CPU 2 (0xc418) vector 50

ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 50

ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI

GSI 18 (level, low) -> CPU 2 (0xc418) vector 51

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 51

GSI 71 (level, low) -> CPU 2 (0xc418) vector 52

ACPI: PCI interrupt 0000:03:1f.0[A] -> GSI 71 (level, low) -> IRQ 52

GSI 28 (level, low) -> CPU 2 (0xc418) vector 53

ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 28 (level, low) -> IRQ 53

GSI 29 (level, low) -> CPU 2 (0xc418) vector 54

ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 54

GSI 47 (level, low) -> CPU 2 (0xc418) vector 55

ACPI: PCI interrupt 0000:06:1f.0[A] -> GSI 47 (level, low) -> IRQ 55

GSI 119 (level, low) -> CPU 2 (0xc418) vector 56

ACPI: PCI interrupt 0000:0a:1f.0[A] -> GSI 119 (level, low) -> IRQ 56

GSI 95 (level, low) -> CPU 2 (0xc418) vector 57

ACPI: PCI interrupt 0000:0c:1f.0[A] -> GSI 95 (level, low) -> IRQ 57

GSI 167 (level, low) -> CPU 2 (0xc418) vector 58

ACPI: PCI interrupt 0000:10:1f.0[A] -> GSI 167 (level, low) -> IRQ 58

GSI 120 (level, low) -> CPU 2 (0xc418) vector 59

ACPI: PCI interrupt 0000:12:01.0[A] -> GSI 120 (level, low) -> IRQ 59

GSI 143 (level, low) -> CPU 2 (0xc418) vector 60

ACPI: PCI interrupt 0000:12:1f.0[A] -> GSI 143 (level, low) -> IRQ 60

perfmon: version 2.0 IRQ 238

perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)

PAL Information Facility v0.5

perfmon: added sampling format default_format

perfmon_default_smpl: default_format v2.0 registered

Total HugeTLB memory allocated, 0

Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).

udf: registering filesystem

Initializing Cryptographic API

ACPI: Power Button (FF) [PWRF]

ACPI: Processor [CPU0] (supports C1)

ACPI: Processor [CPU1] (supports C1)

ACPI: Processor [CPU2] (supports C1)

ACPI: Processor [CPU3] (supports C1)

EFI Time Services Driver v0.4

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled

acpi_serial_port: zero-length IO port range?

ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A

acpi_serial_port: zero-length IO port range?

ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

loop: loaded (max 8 devices)

Intel(R) PRO/1000 Network Driver - version 5.2.52-k4

Copyright (c) 1999-2004 Intel Corporation.

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 51

e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection

ACPI: PCI interrupt 0000:12:01.0[A] -> GSI 120 (level, low) -> IRQ 59

e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection

Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)

bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

st: Version 20040403, fixed bufsize 32768, s/g segs 256

osst :I: Tape driver with OnStream support version 0.99.1

osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $

Fusion MPT base driver 3.01.09

Copyright (c) 1999-2004 LSI Logic Corporation

ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 28 (level, low) -> IRQ 53

mptbase: Initiating ioc0 bringup

ioc0: 53C1030: Capabilities={Initiator}

ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 54

mptbase: Initiating ioc1 bringup

ioc1: 53C1030: Capabilities={Initiator}

Fusion MPT SCSI Host driver 3.01.09

scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=53

Using anticipatory io scheduler

  Vendor: SEAGATE   Model: ST318406LC        Rev: 8A03

  Type:   Direct-Access                      ANSI SCSI revision: 03

SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)

SCSI device sda: drive cache: write through

 sda: sda1 sda2 sda3

Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0

  Vendor: ESG-SHV   Model: SCA HSBP M17      Rev: 0101

  Type:   Processor                          ANSI SCSI revision: 02

Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 3

scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=54

ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 50

ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller

ehci_hcd 0000:00:1d.7: irq 50, pci mem c0000000f9ff0000

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 bytes, correcting to 128

ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

USB Universal Host Controller Interface driver v2.2

ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 48

uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1

uhci_hcd 0000:00:1d.0: irq 48, io base 0000000000004cc0

uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 49

uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2

uhci_hcd 0000:00:1d.1: irq 49, io base 0000000000004ce0

uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

usbcore: registered new driver hiddev

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

mice: PS/2 mouse device common for all mice

EFI Variables Facility v0.08 2004-May-17

NET: Registered protocol family 2

IP: routing cache hash table of 16384 buckets, 256Kbytes

TCP: Hash tables configured (established 131072 bind 65536)

arp_tables: (C) 2002 David S. Miller

NET: Registered protocol family 1

usb 3-1: new full speed USB device using address 2

hub 3-1:1.0: USB hub found

hub 3-1:1.0: 7 ports detected

NET: Registered protocol family 17

kjournald starting.  Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

VFS: Mounted root (ext3 filesy>tem) r1.1:only.
owFspeid UuBudedike uelnm addre 208kB fhelper[221]: Unsupported data reference 8821862825984 [1]

Modules linked in:


Pid: 221, CPU 3, comm:              khelper

psr : 00001010085a2010 ifs : 8000000000000813 ip  : [<a0000001005fed30>]    Not tainted

ip is at sba_alloc_range+0x50/0x1280

unat: 0000000000000000 pfs : 0000000000000814 rsc : 0000000000000003

rnat: 0000000000000000 bsps: 0000000000000000 pr  : 0000000000065995

ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70033f

csd : 0000000000000000 ssd : 0000000000000000

b0  : a000000100600f80 b6  : a000000100308d00 b7  : a00000010055e3a0

f6  : 1003e6db6db6db6db6db7 f7  : 1003e000000000000f763

f8  : 100059dfff62000000000 f9  : 1003e000000000006c3b5

f10 : 1003e0000000000001212 f11 : 1003e0000000000007e7e

r1  : a000000100c3e560 r2  : e000000004848000 r3  : 0000000000001212

r8  : 0000000000000000 r9  : 0000000000000000 r10 : a000000100a57e48

r11 : 0000000000000040 r12 : e00000003cfd7510 r13 : e00000003cfd0000

r14 : e000000001118000 r15 : 0000000000000040 r16 : e00000003cff8000

r17 : 0000000000001000 r18 : e000000004849000 r19 : 0000000000001000

r20 : e00000003dd99000 r21 : e00000000177af40 r22 : 0000000000000000

r23 : a000000100a7fce8 r24 : 0000000000000000 r25 : e00000003dd98fff

r26 : e00000000177af58 r27 : 0000000000000000 r28 : a0000001005fed20

r29 : e00000003dd98fff r30 : 0000000000000001 r31 : 0000000000000038


Call Trace:

 [<a000000100019600>] show_stack+0x80/0xa0

                                sp=e00000003cfd7070 bsp=e00000003cfd1b10

 [<a00000010003fd10>] die+0x1d0/0x280

                                sp=e00000003cfd7240 bsp=e00000003cfd1ae8

 [<a000000100040ae0>] ia64_fault+0x180/0xcc0

                                sp=e00000003cfd7240 bsp=e00000003cfd1aa8

 [<a000000100012180>] ia64_leave_kernel+0x0/0x260

                                sp=e00000003cfd7340 bsp=e00000003cfd1aa8

 [<a0000001005fed30>] sba_alloc_range+0x50/0x1280

                                sp=e00000003cfd7510 bsp=e00000003cfd1a10

 [<a000000100600f80>] sba_map_sg+0x380/0x740

                                sp=e00000003cfd7510 bsp=e00000003cfd1988

 [<a00000010055b010>] mptscsih_AddSGE+0xf0/0x740

                                sp=e00000003cfd7520 bsp=e00000003cfd1910

 [<a00000010055e9d0>] mptscsih_qcmd+0x630/0xba0

                                sp=e00000003cfd7530 bsp=e00000003cfd18a8

 [<a00000010048f2c0>] scsi_dispatch_cmd+0x480/0x6a0

                                sp=e00000003cfd7530 bsp=e00000003cfd1870

 [<a00000010049d800>] scsi_request_fn+0x5a0/0xac0

                                sp=e00000003cfd7540 bsp=e00000003cfd1750

 [<a0000001003ced00>] __generic_unplug_device+0xc0/0xe0

                                sp=e00000003cfd7540 bsp=e00000003cfd1730

 [<a0000001003ceda0>] generic_unplug_device+0x80/0xe0

                                sp=e00000003cfd7540 bsp=e00000003cfd1710

 [<a0000001003cee90>] blk_backing_dev_unplug+0x90/0xa0

                                sp=e00000003cfd7540 bsp=e00000003cfd16f0

 [<a00000010012a020>] sync_buffer+0x100/0x120

                                sp=e00000003cfd7540 bsp=e00000003cfd16d8

 [<a00000010012a480>] __wait_on_buffer+0x1e0/0x200

                                sp=e00000003cfd7540 bsp=e00000003cfd16b0

 [<a00000010012e230>] __bread_slow+0x150/0x1a0

                                sp=e00000003cfd75a0 bsp=e00000003cfd1690

 [<a00000010012eb00>] __bread+0x60/0x80

                                sp=e00000003cfd75a0 bsp=e00000003cfd1668

 [<a0000001001bb9e0>] ext3_get_branch+0xc0/0x2a0

                                sp=e00000003cfd75a0 bsp=e00000003cfd1620

 [<a0000001001bc8e0>] ext3_get_block_handle+0xc0/0x6a0

                                sp=e00000003cfd75a0 bsp=e00000003cfd1588

 [<a00000010017a390>] do_mpage_readpage+0x650/0x680

                                sp=e00000003cfd7620 bsp=e00000003cfd14e0

 [<a00000010017a4f0>] mpage_readpages+0x130/0x2a0

                                sp=e00000003cfd7780 bsp=e00000003cfd1478

 [<a0000001001bee50>] ext3_readpages+0x30/0x60

                                sp=e00000003cfd7820 bsp=e00000003cfd1448

 [<a0000001000ef460>] read_pages+0x280/0x2a0

                                sp=e00000003cfd7820 bsp=e00000003cfd13d0

 [<a0000001000efab0>] do_page_cache_readahead+0x210/0x440

                                sp=e00000003cfd78b0 bsp=e00000003cfd1350

 [<a0000001000efe40>] page_cache_readahead+0x160/0x520

                                sp=e00000003cfd78c0 bsp=e00000003cfd1300

 [<a0000001000deac0>] do_generic_mapping_read+0x1a0/0x800

                                sp=e00000003cfd78c0 bsp=e00000003cfd1258

 [<a0000001000df730>] __generic_file_aio_read+0x370/0x400

                                sp=e00000003cfd7920 bsp=e00000003cfd11e8

 [<a0000001000df820>] generic_file_aio_read+0x60/0xc0

                                sp=e00000003cfd7940 bsp=e00000003cfd11b8

 [<a000000100127130>] do_sync_read+0x110/0x160

                                sp=e00000003cfd7950 bsp=e00000003cfd1178

 [<a000000100127390>] vfs_read+0x210/0x2c0

                                sp=e00000003cfd79d0 bsp=e00000003cfd1130

 [<a000000100141200>] kernel_read+0x60/0xa0

                                sp=e00000003cfd79d0 bsp=e00000003cfd10f8

 [<a0000001001923f0>] load_script+0x550/0x580

                                sp=e00000003cfd79e0 bsp=e00000003cfd10b8

 [<a0000001001436a0>] search_binary_handler+0x400/0x7a0

                                sp=e00000003cfd7a70 bsp=e00000003cfd1038

 [<a000000100143d80>] do_execve+0x340/0x3e0

                                sp=e00000003cfd7a70 bsp=e00000003cfd0fc8

 [<a00000010001b250>] sys_execve+0x90/0xe0

                                sp=e00000003cfd7c60 bsp=e00000003cfd0f58

 [<a000000100011710>] ia64_execve+0x30/0x160

                                sp=e00000003cfd7c60 bsp=e00000003cfd0f30

 [<a000000100012000>] ia64_ret_from_syscall+0x0/0x20

                                sp=e00000003cfd7c60 bsp=e00000003cfd0f30

 [<a000000100011e20>] execve+0x0/0x20

                                sp=e00000003cfd7e30 bsp=e00000003cfd0f30

 [<a0000001000be7e0>] ____call_usermodehelper+0x160/0x1a0

                                sp=e00000003cfd7e30 bsp=e00000003cfd0f18

 [<a00000010001b5a0>] kernel_thread_helper+0xe0/0x100

                                sp=e00000003cfd7e30 bsp=e00000003cfd0ef0

 [<a000000100009060>] start_kernel_thread+0x20/0x40

                                sp=e00000003cfd7e30 bsp=e00000003cfd0ef0

 


_______________________________________________

Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users

[Index of Archives]         [Linux RAID]     [Kernel Development]     [Red Hat Install]     [Video 4 Linux]     [Postgresql]     [Fedora]     [Gimp]     [Yosemite News]

  Powered by Linux