Hi, On Mon, Feb 04, 2002 at 11:15:38AM -0800, Steve Lee wrote: > I've been using ext3 on some of my production servers, I am now > having some serious issues. I'm not sure where to pin point this > to. > > 1. I have success using this with a Mylex Raid controller and have > no problem. setup as RAID 1. > 2. I have success using this with a standalone at all levels > single ended SCSI, IDE Drives. > 3. "" This is where my problem starts "" > i'm using a AMI MegaRaid on a JetStore with approximately 8 drives > that make on big fat 500Gigabyte drive. > I have just upgraded this box 3 weeks ago to RedHat 7.2 and converted > the ext2 filesystem to ext3. Well, it's clearly a scsi-layer problem, not a filesystem problem. > Feb 3 04:05:00 reallyreal kernel: scsi : aborting command due to timeout > : pid 0, scsi2, channel 1, id 0, lu > n 0 Read (10) 00 19 72 fd 57 00 00 38 00 What version of firmware is in the megaraid? 147 was known to be bad. 161 is recommended. Cheers, Stephen
