This implements a simple policy for choosing scaling modes
(trapezoidal for decimation, PPF for magnification), and a single PPF
filter (Mitchell/Netravali's recommendation).
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_drv.h | 4 +
drivers/gpu/drm/vc4/vc4_hvs.c | 85 ++++++++++++++
drivers/gpu/drm/vc4/vc4_plane.c | 253 +++++++++++++++++++++++++++++++++++++---
drivers/gpu/drm/vc4/vc4_regs.h | 46 ++++++++
4 files changed, 375 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 663e440..a7fea77 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -155,7 +155,11 @@ struct vc4_hvs {
* list. Units are dwords.
*/
struct drm_mm dlist_mm;
+ /* Memory manager for the LBM memory used by HVS scaling. */
+ struct drm_mm lbm_mm;
spinlock_t mm_lock;
+
+ struct drm_mm_node mitchell_netravali_filter;
};
struct vc4_plane {
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 9e43554..1c8b220 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -100,12 +100,77 @@ int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused)
}
#endif
+/* The filter kernel is composed of dwords each containing 3 9-bit
+ * signed integers packed next to each other.
+ */
+#define VC4_INT_TO_COEFF(coeff) (coeff & 0x1ff)
+#define VC4_PPF_FILTER_WORD(c0, c1, c2) \
+ ((((c0) & 0x1ff) << 0) | \
+ (((c1) & 0x1ff) << 9) | \
+ (((c2) & 0x1ff) << 18))
+
+/* The whole filter kernel is arranged as the coefficients 0-16 going
+ * up, then a pad, then 17-31 going down and reversed within the
+ * dwords. This means that a linear phase kernel (where it's
+ * symmetrical at the boundary between 15 and 16) has the last 5
+ * dwords matching the first 5, but reversed..
+ */
+#define VC4_LINEAR_PHASE_KERNEL(c0, c1, c2, c3, c4, c5, c6, c7, c8, \
+ c9, c10, c11, c12, c13, c14, c15) \
+ {VC4_PPF_FILTER_WORD(c0, c1, c2), \
+ VC4_PPF_FILTER_WORD(c3, c4, c5), \
+ VC4_PPF_FILTER_WORD(c6, c7, c8), \
+ VC4_PPF_FILTER_WORD(c9, c10, c11), \
+ VC4_PPF_FILTER_WORD(c12, c13, c14), \
+ VC4_PPF_FILTER_WORD(c15, c15, 0)}
+
+#define VC4_LINEAR_PHASE_KERNEL_DWORDS 6
+#define VC4_KERNEL_DWORDS (VC4_LINEAR_PHASE_KERNEL_DWORDS * 2 - 1)
+
+/* Recommended B=1/3, C=1/3 filter choice from Mitchell/Netravali.
+ * http://www.cs.utexas.edu/~fussell/courses/cs384g/lectures/mitchell/Mitchell.pdf
+ */
+static const u32 mitchell_netravali_1_3_1_3_kernel[] =
+ VC4_LINEAR_PHASE_KERNEL(0, -2, -6, -8, -10, -8, -3, 2, 18,
+ 50, 82, 119, 155, 187, 213, 227);
+
+static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs,
+ struct drm_mm_node *space,
+ const u32 *kernel)
+{
+ int ret, i;
+ u32 __iomem *dst_kernel;
+
+ ret = drm_mm_insert_node(&hvs->dlist_mm, space, VC4_KERNEL_DWORDS, 1,
+ 0);
+ if (ret) {
+ DRM_ERROR("Failed to allocate space for filter kernel: %d\n",
+ ret);
+ return ret;
+ }
+
+ dst_kernel = hvs->dlist + space->start;
+
+ /* Upload up to the symmetric word */
+ for (i = 0; i < VC4_KERNEL_DWORDS; i++) {
+ if (i < VC4_LINEAR_PHASE_KERNEL_DWORDS)
+ writel(kernel[i], &dst_kernel[i]);
+ else {
+ writel(kernel[VC4_KERNEL_DWORDS - i - 1],
+ &dst_kernel[i]);
+ }
+ }
+
+ return 0;
+}
+
static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = drm->dev_private;
struct vc4_hvs *hvs = NULL;
+ int ret;
hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL);
if (!hvs)
@@ -130,6 +195,22 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
HVS_BOOTLOADER_DLIST_END,
(SCALER_DLIST_SIZE >> 2) - HVS_BOOTLOADER_DLIST_END);
+ /* Set up the HVS LBM memory manager. We could have some more
+ * complicated data structure that allowed reuse of LBM areas
+ * between planes when they don't overlap on the screen, but
+ * for now we just allocate globally.
+ */
+ drm_mm_init(&hvs->lbm_mm, 0, 96 * 1024);
+
+ /* Upload filter kernels. We only have the one for now, so we
+ * keep it around for the lifetime of the driver.
+ */
+ ret = vc4_hvs_upload_linear_kernel(hvs,
+ &hvs->mitchell_netravali_filter,
+ mitchell_netravali_1_3_1_3_kernel);
+ if (ret)
+ return ret;
+
vc4->hvs = hvs;
return 0;
}
@@ -140,7 +221,11 @@ static void vc4_hvs_unbind(struct device *dev, struct device *master,
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = drm->dev_private;
+ if (vc4->hvs->mitchell_netravali_filter.allocated)
+ drm_mm_remove_node(&vc4->hvs->mitchell_netravali_filter);
+
drm_mm_takedown(&vc4->hvs->dlist_mm);
+ drm_mm_takedown(&vc4->hvs->lbm_mm);
vc4->hvs = NULL;
}
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 4e4c3ea..7cedc726 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -24,6 +24,12 @@
#include "drm_fb_cma_helper.h"
#include "drm_plane_helper.h"
+enum vc4_scaling_mode {
+ VC4_SCALING_NONE,
+ VC4_SCALING_TPZ,
+ VC4_SCALING_PPF,
+};
+
struct vc4_plane_state {
struct drm_plane_state base;
/* System memory copy of the display list for this element, computed
@@ -47,13 +53,19 @@ struct vc4_plane_state {
/* Clipped coordinates of the plane on the display. */
int crtc_x, crtc_y, crtc_w, crtc_h;
- /* Clipped size of the area scanned from in the FB. */
- u32 src_w, src_h;
+ /* Clipped area being scanned from in the FB. */
+ u32 src_x, src_y, src_w, src_h;
+
+ enum vc4_scaling_mode x_scaling, y_scaling;
+ bool is_unity;
/* Offset to start scanning out from the start of the plane's
* BO.
*/
u32 offset;
+
+ /* Our allocation in LBM for temporary storage during scaling. */
+ struct drm_mm_node lbm;
};
static inline struct vc4_plane_state *
@@ -90,6 +102,16 @@ static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
return NULL;
}
+static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
+{
+ if (dst > src)
+ return VC4_SCALING_PPF;
+ else if (dst < src)
+ return VC4_SCALING_TPZ;
+ else
+ return VC4_SCALING_NONE;
+}
+
static bool plane_enabled(struct drm_plane_state *state)
{
return state->fb && state->crtc;
@@ -106,6 +128,8 @@ static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane
if (!vc4_state)
return NULL;
+ memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
+
__drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
if (vc4_state->dlist) {
@@ -125,8 +149,17 @@ static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane
static void vc4_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state)
{
+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ if (vc4_state->lbm.allocated) {
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+ drm_mm_remove_node(&vc4_state->lbm);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+ }
+
kfree(vc4_state->dlist);
__drm_atomic_helper_plane_destroy_state(plane, &vc4_state->base);
kfree(state);
@@ -165,23 +198,60 @@ static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
vc4_state->dlist[vc4_state->dlist_count++] = val;
}
+/* Returns the scl0/scl1 field based on whether the dimensions need to
+ * be up/down/non-scaled.
+ *
+ * This is a replication of a table from the spec.
+ */
+static u32 vc4_get_scl_field(struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ switch (vc4_state->x_scaling << 2 | vc4_state->y_scaling) {
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_PPF_V_PPF;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_TPZ_V_PPF;
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_PPF_V_TPZ;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
+ return SCALER_CTL0_SCL_H_PPF_V_NONE;
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_NONE_V_PPF;
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_NONE_V_TPZ;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
+ return SCALER_CTL0_SCL_H_TPZ_V_NONE;
+ default:
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
+ /* The unity case is independently handled by
+ * SCALER_CTL0_UNITY.
+ */
+ return 0;
+ }
+}
+
static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
{
+ struct drm_plane *plane = state->plane;
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
struct drm_framebuffer *fb = state->fb;
+ u32 subpixel_src_mask = (1 << 16) - 1;
vc4_state->offset = fb->offsets[0];
- if (state->crtc_w << 16 != state->src_w ||
- state->crtc_h << 16 != state->src_h) {
- /* We don't support scaling yet, which involves
- * allocating the LBM memory for scaling temporary
- * storage, and putting filter kernels in the HVS
- * context.
- */
+ /* We don't support subpixel source positioning for scaling. */
+ if ((state->src_x & subpixel_src_mask) ||
+ (state->src_y & subpixel_src_mask) ||
+ (state->src_w & subpixel_src_mask) ||
+ (state->src_h & subpixel_src_mask)) {
return -EINVAL;
}
+ vc4_state->src_x = state->src_x >> 16;
+ vc4_state->src_y = state->src_y >> 16;
vc4_state->src_w = state->src_w >> 16;
vc4_state->src_h = state->src_h >> 16;
@@ -190,6 +260,23 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
vc4_state->crtc_w = state->crtc_w;
vc4_state->crtc_h = state->crtc_h;
+ vc4_state->x_scaling = vc4_get_scaling_mode(vc4_state->src_w,
+ vc4_state->crtc_w);
+ vc4_state->y_scaling = vc4_get_scaling_mode(vc4_state->src_h,
+ vc4_state->crtc_h);
+ vc4_state->is_unity = (vc4_state->x_scaling == VC4_SCALING_NONE &&
+ vc4_state->y_scaling == VC4_SCALING_NONE);
+
+ /* No configuring scaling on the cursor plane, since it gets
+ non-vblank-synced updates, and scaling requires requires
+ LBM changes which have to be vblank-synced.
+ */
+ if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
+ return -EINVAL;
+
+ /* Clamp the on-screen start x/y to 0. The hardware doesn't
+ * support negative y, and negative x wastes bandwidth.
+ */
if (vc4_state->crtc_x < 0) {
vc4_state->offset += (drm_format_plane_cpp(fb->pixel_format,
0) *
@@ -207,6 +294,87 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
return 0;
}
+static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+ u32 scale, recip;
+
+ scale = (1 << 16) * src / dst;
+
+ /* The specs note that while the reciprocal would be defined
+ * as (1<<32)/scale, ~0 is close enough.
+ */
+ recip = ~0 / scale;
+
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
+ VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
+}
+
+static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+ u32 scale = (1 << 16) * src / dst;
+
+ vc4_dlist_write(vc4_state,
+ SCALER_PPF_AGC |
+ VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
+ VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
+}
+
+static u32 vc4_lbm_size(struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ /* This is the worst case number. One of the two sizes will
+ * be used depending on the scaling configuration.
+ */
+ u32 pix_per_line = max(vc4_state->src_w, (u32)vc4_state->crtc_w);
+ u32 lbm;
+
+ if (vc4_state->is_unity)
+ return 0;
+ else if (vc4_state->y_scaling == VC4_SCALING_TPZ)
+ lbm = pix_per_line * 8;
+ else {
+ /* In special cases, this multiplier might be 12. */
+ lbm = pix_per_line * 16;
+ }
+
+ lbm = roundup(lbm, 32);
+
+ return lbm;
+}
+
+static void vc4_write_scaling_parameters(struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ /* Ch0 H-PPF Word 0: Scaling Parameters */
+ if (vc4_state->x_scaling == VC4_SCALING_PPF) {
+ vc4_write_ppf(vc4_state,
+ vc4_state->src_w, vc4_state->crtc_w);
+ }
+
+ /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
+ if (vc4_state->y_scaling == VC4_SCALING_PPF) {
+ vc4_write_ppf(vc4_state,
+ vc4_state->src_h, vc4_state->crtc_h);
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+ }
+
+ /* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
+ if (vc4_state->x_scaling == VC4_SCALING_TPZ) {
+ vc4_write_tpz(vc4_state,
+ vc4_state->src_w, vc4_state->crtc_w);
+ }
+
+ /* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
+ if (vc4_state->y_scaling == VC4_SCALING_TPZ) {
+ vc4_write_tpz(vc4_state,
+ vc4_state->src_h, vc4_state->crtc_h);
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+ }
+}
/* Writes out a full display list for an active plane to the plane's
* private dlist state.
@@ -214,22 +382,50 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
static int vc4_plane_mode_set(struct drm_plane *plane,
struct drm_plane_state *state)
{
+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
u32 ctl0_offset = vc4_state->dlist_count;
const struct hvs_format *format = vc4_get_hvs_format(fb->pixel_format);
+ u32 scl;
+ u32 lbm_size;
+ unsigned long irqflags;
int ret;
ret = vc4_plane_setup_clipping_and_scaling(state);
if (ret)
return ret;
+ /* Allocate the LBM memory that the HVS will use for temporary
+ * storage due to our scaling/format conversion.
+ */
+ lbm_size = vc4_lbm_size(state);
+ if (lbm_size) {
+ if (!vc4_state->lbm.allocated) {
+ spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+ ret = drm_mm_insert_node(&vc4->hvs->lbm_mm,
+ &vc4_state->lbm,
+ lbm_size, 32, 0);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+ } else {
+ WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ scl = vc4_get_scl_field(state);
+
+ /* Control word */
vc4_dlist_write(vc4_state,
SCALER_CTL0_VALID |
(format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
(format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
- SCALER_CTL0_UNITY);
+ (vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
+ VC4_SET_FIELD(scl, SCALER_CTL0_SCL0) |
+ VC4_SET_FIELD(scl, SCALER_CTL0_SCL1));
/* Position Word 0: Image Positions and Alpha Value */
vc4_state->pos0_offset = vc4_state->dlist_count;
@@ -238,9 +434,14 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
- /* Position Word 1: Scaled Image Dimensions.
- * Skipped due to SCALER_CTL0_UNITY scaling.
- */
+ /* Position Word 1: Scaled Image Dimensions. */
+ if (!vc4_state->is_unity) {
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(vc4_state->crtc_w,
+ SCALER_POS1_SCL_WIDTH) |
+ VC4_SET_FIELD(vc4_state->crtc_h,
+ SCALER_POS1_SCL_HEIGHT));
+ }
/* Position Word 2: Source Image Size, Alpha Mode */
vc4_state->pos2_offset = vc4_state->dlist_count;
@@ -266,6 +467,32 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
vc4_dlist_write(vc4_state,
VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH));
+ if (!vc4_state->is_unity) {
+ /* LBM Base Address. */
+ if (vc4_state->y_scaling != VC4_SCALING_NONE)
+ vc4_dlist_write(vc4_state, vc4_state->lbm.start);
+
+ vc4_write_scaling_parameters(state);
+
+ /* If any PPF setup was done, then all the kernel
+ * pointers get uploaded.
+ */
+ if (vc4_state->x_scaling == VC4_SCALING_PPF ||
+ vc4_state->y_scaling == VC4_SCALING_PPF) {
+ u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
+ SCALER_PPF_KERNEL_OFFSET);
+
+ /* HPPF plane 0 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* VPPF plane 0 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* HPPF plane 1 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* VPPF plane 1 */
+ vc4_dlist_write(vc4_state, kernel);
+ }
+ }
+
vc4_state->dlist[ctl0_offset] |=
VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 4e52a0a..037c7fe 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -536,6 +536,21 @@ enum hvs_pixel_format {
#define SCALER_CTL0_ORDER_MASK VC4_MASK(14, 13)
#define SCALER_CTL0_ORDER_SHIFT 13
+#define SCALER_CTL0_SCL1_MASK VC4_MASK(10, 8)
+#define SCALER_CTL0_SCL1_SHIFT 8
+
+#define SCALER_CTL0_SCL0_MASK VC4_MASK(7, 5)
+#define SCALER_CTL0_SCL0_SHIFT 5
+
+#define SCALER_CTL0_SCL_H_PPF_V_PPF 0
+#define SCALER_CTL0_SCL_H_TPZ_V_PPF 1
+#define SCALER_CTL0_SCL_H_PPF_V_TPZ 2
+#define SCALER_CTL0_SCL_H_TPZ_V_TPZ 3
+#define SCALER_CTL0_SCL_H_PPF_V_NONE 4
+#define SCALER_CTL0_SCL_H_NONE_V_PPF 5
+#define SCALER_CTL0_SCL_H_NONE_V_TPZ 6
+#define SCALER_CTL0_SCL_H_TPZ_V_NONE 7
+
/* Set to indicate no scaling. */
#define SCALER_CTL0_UNITY BIT(4)
@@ -551,6 +566,12 @@ enum hvs_pixel_format {
#define SCALER_POS0_START_X_MASK VC4_MASK(11, 0)
#define SCALER_POS0_START_X_SHIFT 0
+#define SCALER_POS1_SCL_HEIGHT_MASK VC4_MASK(27, 16)
+#define SCALER_POS1_SCL_HEIGHT_SHIFT 16
+
+#define SCALER_POS1_SCL_WIDTH_MASK VC4_MASK(11, 0)
+#define SCALER_POS1_SCL_WIDTH_SHIFT 0
+
#define SCALER_POS2_ALPHA_MODE_MASK VC4_MASK(31, 30)
#define SCALER_POS2_ALPHA_MODE_SHIFT 30
#define SCALER_POS2_ALPHA_MODE_PIPELINE 0
@@ -564,6 +585,31 @@ enum hvs_pixel_format {
#define SCALER_POS2_WIDTH_MASK VC4_MASK(11, 0)
#define SCALER_POS2_WIDTH_SHIFT 0
+#define SCALER_TPZ0_VERT_RECALC BIT(31)
+#define SCALER_TPZ0_SCALE_MASK VC4_MASK(28, 8)
+#define SCALER_TPZ0_SCALE_SHIFT 8
+#define SCALER_TPZ0_IPHASE_MASK VC4_MASK(7, 0)
+#define SCALER_TPZ0_IPHASE_SHIFT 0
+#define SCALER_TPZ1_RECIP_MASK VC4_MASK(15, 0)
+#define SCALER_TPZ1_RECIP_SHIFT 0
+
+/* Skips interpolating coefficients to 64 phases, so just 8 are used.
+ * Required for nearest neighbor.
+ */
+#define SCALER_PPF_NOINTERP BIT(31)
+/* Replaes the highest valued coefficient with one that makes all 4
+ * sum to unity.
+ */
+#define SCALER_PPF_AGC BIT(30)
+#define SCALER_PPF_SCALE_MASK VC4_MASK(24, 8)
+#define SCALER_PPF_SCALE_SHIFT 8
+#define SCALER_PPF_IPHASE_MASK VC4_MASK(6, 0)
+#define SCALER_PPF_IPHASE_SHIFT 0
+
+#define SCALER_PPF_KERNEL_OFFSET_MASK VC4_MASK(13, 0)
+#define SCALER_PPF_KERNEL_OFFSET_SHIFT 0
+#define SCALER_PPF_KERNEL_UNCACHED BIT(31)
+
#define SCALER_SRC_PITCH_MASK VC4_MASK(15, 0)
#define SCALER_SRC_PITCH_SHIFT 0
--
2.7.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
