Hi Jitao,
Looks really good.
Just a couple of tiny things...
On Wed, Feb 3, 2016 at 4:48 PM, Jitao Shi <jitao.shi@xxxxxxxxxxxx> wrote:
>
> This patch adds drm_bridge driver for parade DSI to eDP bridge chip.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
[snip]
> +static int ps8640_get_modes(struct drm_connector *connector)
> +{
> + struct ps8640 *ps_bridge = connector_to_ps8640(connector);
> + u8 *edid;
> + int ret, num_modes = 0;
> + bool power_off;
> +
> + if (ps_bridge->edid)
> + return drm_add_edid_modes(connector, ps_bridge->edid);
> +
> + power_off = !ps_bridge->enabled;
> + ps8640_pre_enable(&ps_bridge->bridge);
> +
> + edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
devm_kmalloc() if you can. Or at least kfree() in ps8640_remove
> + if (!edid) {
> + DRM_ERROR("Failed to allocate EDID\n");
> + return 0;
> + }
> +
> + ret = ps8640_read(ps_bridge->ddc_i2c, 0, edid, EDID_LENGTH);
> + if (ret) {
> + kfree(edid);
> + goto out;
> + }
> +
> + ps_bridge->edid = (struct edid *)edid;
> + drm_mode_connector_update_edid_property(connector, ps_bridge->edid);
> +
> + num_modes = drm_add_edid_modes(connector, ps_bridge->edid);
> +
> +out:
> + if (power_off)
> + ps8640_post_disable(&ps_bridge->bridge);
> +
> + return num_modes;
> +}
[snip]
> +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge)
> +{
> + u8 cmd[2];
> + struct i2c_client *client = ps_bridge->page[2];
> +
> + /* Enable-Write-Status-Register */
> + cmd[0] = WRITE_ENABLE_CMD;
> + ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> +
> + /* protect BPL/BP0/BP1 */
> + cmd[0] = WRITE_STATUS_REG_CMD;
> + cmd[1] = BLK_PROTECT_BITS | STATUS_REG_PROTECT;
> + ps8640_spi_send_cmd(ps_bridge, cmd, 2);
> +
> + /* wait for SPI rom ready */
> + ps8640_wait_rom_idle(ps_bridge);
> +
> + /* disable PS8640 mapping function */
> + ps8640_write_byte(client, PAGE2_ENCTLSPI_WR, 0x00);
> +
> + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1);
> + return 0;
> +}
> +
> +static int ps8640_enter_bl(struct ps8640 *ps_bridge)
> +{
> + ps_bridge->in_fw_update = true;
> + return ps8640_spi_dl_mode(ps_bridge);
On error:
ps_bridge->in_fw_update = false;
Thanks,
-Dan
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
