when i boot the kernel and connect the HDMI cable after booting i can retrieve 4 modes... :)
if i boot linux with the HDMI cable inserted the kernel hangs.
Possible relation with HPD?
Regards,
C.Palminha
# modetest -M drm-arcpgu -c
Connectors:
id encoder status type size (mm) modes encoders
21 0 connected HDMI-A 0x0 4 20
modes:
name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot)
800x600 60 800 840 968 1056 600 601 605 628 flags: phsync, pvsync; type: driver
800x600 56 800 824 896 1024 600 601 603 625 flags: phsync, pvsync; type: driver
848x480 60 848 864 976 1088 480 486 494 517 flags: phsync, pvsync; type: driver
640x480 60 640 656 752 800 480 490 492 525 flags: nhsync, nvsync; type: driver
props:
1 EDID:
flags: immutable blob
blobs:
value:
2 DPMS:
flags: enum
enums: On=0 Standby=1 Suspend=2 Off=3
value: 0
#
On 19-01-2016 16:03, Carlos Palminha wrote:
> Hi Xiang,
>
> Its returning 0 modes... :(
>
> Regards,
> C.Palminha
>
> # modetest -M drm-arcpgu -c
> Connectors:
> id encoder status type size (mm) modes encoders
> 21 0 disconnected HDMI-A 0x0 0 20
> props:
> 1 EDID:
> flags: immutable blob
> blobs:
>
> value:
> 2 DPMS:
> flags: enum
> enums: On=0 Standby=1 Suspend=2 Off=3
> value: 0
>
> #
>
> On 19-01-2016 03:38, Xinliang Liu wrote:
>> On 18 January 2016 at 22:45, Carlos Palminha <CARLOS.PALMINHA@xxxxxxxxxxxx>
>> wrote:
>>
>>> I'm also getting a message from DRM saying can't find any crtc or
>>> sizes...i'm really missing something here.
>>> :(
>>>
>>> -- log --
>>> [drm] Initialized drm 1.1.0 20060810
>>> drm-arcpgu e0017000.pgu: No connectors reported connected with modes
>>> [drm] Cannot find any crtc or sizes - going 1024x768
>>> Console: switching to colour frame buffer device 128x48
>>> drm-arcpgu e0017000.pgu: fb0: frame buffer device
>>> [drm] Initialized drm-arcpgu 1.0.0 20151127 on minor 0
>>> -- log ---
>>>
>>> Any help?
>>>
>>> Regards,
>>> C.Palminha
>>>
>>>
>>> On 18-01-2016 14:32, Carlos Palminha wrote:
>>>> Hi Xinliang,
>>>>
>>>> My get_modes seems to be implemented as the rcar driver...
>>>> Probably still missing some init step?
>>>>
>>>> Regards,
>>>> C.Palminha
>>>>
>>>>
>>>> static int arcpgu_drm_connector_get_modes(struct drm_connector
>>> *connector)
>>>> {
>>>> struct drm_encoder_slave *slave;
>>>> const struct drm_encoder_slave_funcs *sfuncs;
>>>> struct arcpgu_drm_connector * con =
>>>> container_of(connector, struct arcpgu_drm_connector, connector);
>>>>
>>>> slave = con->encoder_slave;
>>>> if(slave == NULL) {
>>>> dev_err(connector->dev->dev,
>>>> "connector_get_modes: cannot find slave encoder for connector\n");
>>>> return 0;
>>>> }
>>>>
>>>> sfuncs = slave->slave_funcs;
>>>> if(sfuncs->get_modes == NULL){
>>>> return 0;
>>>> }
>>>>
>>>> return sfuncs->
>>>
>>> get_modes(&slave->base,connector);
>>>> }
>>>>
>>>
>>
>> so, this will call adv7511 driver's
>>
>> get_modes call back.
>> I wonder if the system boot up, it can get modes or not.
>> You can test it with the modetest. i.e. $ modetest -M DRM_DRIVER_NAME -c
>>
>>
>>
>>
>>>> On 31-12-2015 02:19, Xinliang Liu wrote:
>>>>>
>>>>>
>>>>> On 31 December 2015 at 02:46, Carlos Palminha
>>>>> <CARLOS.PALMINHA@xxxxxxxxxxxx <mailto:CARLOS.PALMINHA@xxxxxxxxxxxx>>
>>> wrote:
>>>>>
>>>>> Hi guys,
>>>>>
>>>>> I'm writing a DRM driver for a framebuffer embedded hardware that
>>>>> uses an i2c encoder (adv7511), following the basic steps suggested
>>>>> by Laurent in "anatomy of an embedded KMS driver":
>>>>> https://www.youtube.com/watch?v=Ja8fM7rTae4
>>>>>
>>>>> After initiliazing all kms, crtc, encoder, i2c, connector functions
>>>>> and structures i'm calling drm_fbdev_cma_init to create a fbdev.
>>>>>
>>>>> When booting i'm getting an error message saying "No connectors
>>>>> reported connected with modes", but the driver init is ok and i can
>>>>> find the /dev/dri/* and /dev/fb0 devices.
>>>>>
>>>>> Any clue what i might be missing during the driver load?
>>>>>
>>>>>
>>>>> I think you should check on the 'get_modes' call back of adv7511
>>>>> driver. (Or, if possible show us the code.)
>>>>>
>>>>> Best,
>>>>> -xinliang
>>>>>
>>>>>
>>>>> Thanks...
>>>>>
>>>>> Regards,
>>>>> C.Palminha
>>>>>
>>>>> --- boot log snippet ---
>>>>> [drm] Initialized drm 1.1.0 20060810
>>>>> drm-arcpgu e0017000.pgu: No connectors reported connected with modes
>>>>> [drm] Cannot find any crtc or sizes - going 1024x768
>>>>> Console: switching to colour frame buffer device 128x48
>>>>> drm-arcpgu e0017000.pgu: fb0: frame buffer device
>>>>> [drm] Initialized drm-arcpgu 1.0.0 20151127 on minor 0
>>>>> --- boot log snippet ---
>>>>> --
>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>> linux-fbdev" in
>>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>>> <mailto:majordomo@xxxxxxxxxxxxxxx>
>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>>
>>>
>>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
