Hi Archit, On Wed, 2016-01-13 at 12:41 +0530, Archit Taneja wrote: > Hi Jitao, > > On 01/13/2016 07:48 AM, Jitao Shi wrote: > > This patch adds drm_bridge driver for parade DSI to eDP bridge chip. > > > > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > > --- > > Changes since v6: > > - Add ps8640 firmware update function > > - Change i2c to i2c_transfer from i2c_master_recv/i2c_master_send > > - Add comments for each page client > > I'd commented on the v6 patch set here: > > https://lkml.org/lkml/2015/12/15/62 > > I wanted to know how the bridge driver was transferring parameters > to the dsi host. Is that something that you are hardcoding on both > the dsi host and ps8640 drivers for now? > > My intention of asking this is to know if there are other users > that can take advantage of this patch set: > > https://lkml.org/lkml/2015/12/10/283 > > Thanks, > Archit > Thanks for you comments. This patchsets is under test, it will cowork with other people and wiil take more time. It will be include the next. > > --- > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/parade-ps8640.c | 1106 ++++++++++++++++++++++++++++++++ > > 3 files changed, 1117 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index 6dddd39..dcfdbc9 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -41,4 +41,14 @@ config DRM_PARADE_PS8622 > > ---help--- > > Parade eDP-LVDS bridge chip driver. > > > > +config DRM_PARADE_PS8640 > > + tristate "Parade PS8640 MIPI DSI to eDP Converter" > > + depends on OF > > + select DRM_KMS_HELPER > > + select DRM_PANEL > > + ---help--- > > + Choose this option if you have PS8640 for display > > + The PS8640 is a high-performance and low-power > > + MIPI DSI to eDP converter > > + > > endmenu > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index d4e28be..272e3c01 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o > > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o > > diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c > > new file mode 100644 > > index 0000000..a18d8e9 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/parade-ps8640.c > > @@ -0,0 +1,1106 @@ > > +/* > > + * Copyright (c) 2014 MediaTek Inc. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include <linux/delay.h> > > +#include <linux/err.h> > > +#include <linux/firmware.h> > > +#include <linux/gpio.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_gpio.h> > > +#include <linux/of_graph.h> > > +#include <linux/regulator/consumer.h> > > +#include <asm/unaligned.h> > > +#include <drm/drm_panel.h> > > + > > +#include <drmP.h> > > +#include <drm_crtc_helper.h> > > +#include <drm_crtc.h> > > +#include <drm_atomic_helper.h> > > + > > +#define PAGE2_SPI_CFG3 0x82 > > +#define I2C_TO_SPI_RESET 0x20 > > +#define PAGE2_ROMADD_BYTE1 0x8e > > +#define PAGE2_ROMADD_BYTE2 0x8f > > +#define PAGE2_SWSPI_WDATA 0x90 > > +#define PAGE2_SWSPI_RDATA 0x91 > > +#define PAGE2_SWSPI_LEN 0x92 > > +#define PAGE2_SWSPI_CTL 0x93 > > +#define TRIGGER_NO_READBACK 0x05 > > +#define TRIGGER_READBACK 0x01 > > +#define PAGE2_SPI_STATUS 0x9e > > +#define PAGE2_GPIO_L 0xa6 > > +#define PAGE2_GPIO_H 0xa7 > > +#define PS_GPIO9 BIT(1) > > +#define PAGE2_IROM_CTRL 0xb0 > > +#define IROM_ENABLE 0xc0 > > +#define IROM_DISABLE 0x80 > > +#define PAGE2_SW_REST 0xbc > > +#define PAGE2_ENCTLSPI_WR 0xda > > +#define PAGE2_I2C_BYPASS 0xea > > +#define I2C_BYPASS_EN 0xd0 > > + > > +#define PAGE3_SET_ADD 0xfe > > +#define PAGE3_SET_VAL 0xff > > +#define VDO_CTL_ADD 0x13 > > +#define VDO_DIS 0x18 > > +#define VDO_EN 0x1c > > + > > +#define PAGE4_REV_L 0xf0 > > +#define PAGE4_REV_H 0xf1 > > +#define PAGE4_CHIP_L 0xf2 > > +#define PAGE4_CHIP_H 0xf3 > > + > > +/* Firmware */ > > +#define SPI_MAX_RETRY_CNT 8 > > +#define PS_FW_NAME "ps864x_fw.bin" > > + > > +#define FW_CHIP_ID_OFFSET 0 > > +#define FW_VERSION_OFFSET 2 > > + > > +#define bridge_to_ps8640(e) container_of(e, struct ps8640, bridge) > > +#define connector_to_ps8640(e) container_of(e, struct ps8640, connector) > > + > > +struct ps8640_info { > > + u8 family_id; > > + u8 variant_id; > > + u16 version; > > +}; > > + > > +struct ps8640 { > > + struct drm_connector connector; > > + struct drm_bridge bridge; > > + struct i2c_client *page[8]; > > + struct ps8640_driver_data *driver_data; > > + struct regulator *pwr_1v2_supply; > > + struct regulator *pwr_3v3_supply; > > + struct drm_panel *panel; > > + struct gpio_desc *gpio_rst_n; > > + struct gpio_desc *gpio_slp_n; > > + struct gpio_desc *gpio_mode_sel_n; > > + bool enabled; > > + > > + /* firmware file name */ > > + bool in_fw_update; > > + char *fw_file; > > + struct ps8640_info info; > > +}; > > + > > +static const u8 enc_ctrl_code[6] = {0xaa, 0x55, 0x50, 0x41, 0x52, 0x44}; > > + > > +static int ps8640_regr(struct i2c_client *client, u8 reg, u8 *data, > > + u16 data_len) > > +{ > > + int ret; > > + > > + struct i2c_msg msgs[] = { > > + { > > + .addr = client->addr, > > + .flags = 0, > > + .len = 1, > > + .buf = ®, > > + }, > > + { > > + .addr = client->addr, > > + .flags = I2C_M_RD, > > + .len = data_len, > > + .buf = data, > > + } > > + }; > > + > > + ret = i2c_transfer(client->adapter, msgs, 2); > > + > > + if (ret == 2) > > + return 0; > > + if (ret < 0) > > + return ret; > > + else > > + return -EIO; > > +} > > + > > +static int ps8640_regw(struct i2c_client *client, u8 reg, const u8 *data, > > + u16 data_len) > > +{ > > + int ret, i; > > + struct i2c_msg msg; > > + u8 *buf; > > + > > + buf = devm_kzalloc(&client->dev, data_len + 1, GFP_KERNEL); > > + /* i2c page size is 256 bytes, so limit the data_len 256 */ > > + if (data_len > 256) { > > + dev_err(&client->dev, "data_len must under 256: len = %d\n", > > + data_len); > > + return -EIO; > > + } > > + for (i = 0; i < data_len + 1; i++) > > + buf[i] = (i == 0) ? reg : data[i - 1]; > > + > > + msg.addr = client->addr; > > + msg.flags = 0; > > + msg.len = data_len + 1; > > + msg.buf = buf; > > + > > + ret = i2c_transfer(client->adapter, &msg, 1); > > + if (ret == 1) > > + return 0; > > + if (ret < 0) > > + return ret; > > + else > > + return -EIO; > > +} > > + > > +static int ps8640_regw_byte(struct i2c_client *client, u8 reg, u8 data) > > +{ > > + int ret; > > + struct i2c_msg msg; > > + u8 buf[] = {reg, data}; > > + > > + msg.addr = client->addr; > > + msg.flags = 0; > > + msg.len = sizeof(buf); > > + msg.buf = buf; > > + > > + ret = i2c_transfer(client->adapter, &msg, 1); > > + if (ret == 1) > > + return 0; > > + if (ret < 0) > > + return ret; > > + else > > + return -EIO; > > +} > > + > > +static int ps8640_check_valid_id(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[4]; > > + u8 chip_id[4]; > > + > > + ps8640_regr(client, PAGE4_REV_L, chip_id, 4); > > + > > + if ((chip_id[0] == 0x00) && (chip_id[1] == 0x0a) && > > + (chip_id[2] == 0x00) && (chip_id[3] == 0x30)) > > + return 0; > > + > > + return -ENODEV; > > +} > > + > > +static void ps8640_show_mcu_fw_version(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[5]; > > + u8 fw_ver[2]; > > + > > + ps8640_regr(client, 0x4, fw_ver, 2); > > + ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1]; > > + > > + DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]); > > +} > > + > > +static int ps8640_bdg_enable(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[3]; > > + int ret; > > + u8 vdo_ctrl[2] = {VDO_CTL_ADD, VDO_EN}; > > + > > + ret = ps8640_check_valid_id(ps_bridge); > > + if (ret) { > > + DRM_ERROR("ps8640 not valid: %d\n", ret); > > + return ret; > > + } > > + > > + ret = ps8640_regw(client, PAGE3_SET_ADD, vdo_ctrl, 2); > > + return ret; > > +} > > + > > +static bool ps8640_in_bootloader(struct ps8640 *ps_bridge) > > +{ > > + return ps_bridge->in_fw_update; > > +} > > + > > +static void ps8640_prepare(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + int err, retry_cnt = 0; > > + u8 set_vdo_done; > > + > > + if (ps8640_in_bootloader(ps_bridge)) > > + return; > > + > > + if (ps_bridge->enabled) > > + return; > > + > > + err = drm_panel_prepare(ps_bridge->panel); > > + if (err < 0) { > > + DRM_ERROR("failed to prepare panel: %d\n", err); > > + return; > > + } > > + > > + /* delay for power stable */ > > + usleep_range(500, 700); > > + > > + err = regulator_enable(ps_bridge->pwr_1v2_supply); > > + if (err < 0) { > > + DRM_ERROR("failed to enable vdd12-supply: %d\n", err); > > + goto err_panel_unprepare; > > + } > > + > > + err = regulator_enable(ps_bridge->pwr_3v3_supply); > > + if (err < 0) { > > + DRM_ERROR("failed to enable vdd33-supply: %d\n", err); > > + goto err_regulator_1v2_disable; > > + } > > + > > + gpiod_set_value(ps_bridge->gpio_slp_n, 1); > > + gpiod_set_value(ps_bridge->gpio_rst_n, 0); > > + usleep_range(500, 700); > > + gpiod_set_value(ps_bridge->gpio_rst_n, 1); > > + > > + /* wait for the ps8640 embed mcu ready > > + * first wait 200ms and then check the mcu ready flag every 20ms > > + */ > > + msleep(200); > > + do { > > + err = ps8640_regr(client, PAGE2_GPIO_H, &set_vdo_done, 1); > > + if (err < 0) { > > + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err); > > + goto err_regulator_1v2_disable; > > + } > > + msleep(20); > > + } while ((retry_cnt++ < 10) && ((set_vdo_done & PS_GPIO9) != PS_GPIO9)); > > + > > + ps8640_show_mcu_fw_version(ps_bridge); > > + ps8640_regw_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN); > > + ps_bridge->enabled = true; > > + > > + return; > > + > > +err_regulator_1v2_disable: > > + regulator_disable(ps_bridge->pwr_1v2_supply); > > +err_panel_unprepare: > > + drm_panel_unprepare(ps_bridge->panel); > > +} > > + > > +static void ps8640_pre_enable(struct drm_bridge *bridge) > > +{ > > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > > + > > + ps8640_prepare(ps_bridge); > > +} > > + > > +static void ps8640_enable(struct drm_bridge *bridge) > > +{ > > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > > + int err; > > + > > + err = ps8640_bdg_enable(ps_bridge); > > + if (err) > > + DRM_ERROR("failed to enable unmutevideo: %d\n", err); > > + > > + err = drm_panel_enable(ps_bridge->panel); > > + if (err < 0) > > + DRM_ERROR("failed to enable panel: %d\n", err); > > +} > > + > > +static void ps8640_disable(struct drm_bridge *bridge) > > +{ > > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > > + int err; > > + > > + if (ps8640_in_bootloader(ps_bridge)) > > + return; > > + > > + if (!ps_bridge->enabled) > > + return; > > + > > + ps_bridge->enabled = false; > > + > > + err = drm_panel_disable(ps_bridge->panel); > > + if (err < 0) > > + DRM_ERROR("failed to disable panel: %d\n", err); > > + > > + gpiod_set_value(ps_bridge->gpio_rst_n, 0); > > + gpiod_set_value(ps_bridge->gpio_slp_n, 0); > > + regulator_disable(ps_bridge->pwr_3v3_supply); > > + regulator_disable(ps_bridge->pwr_1v2_supply); > > +} > > + > > +static void ps8640_post_disable(struct drm_bridge *bridge) > > +{ > > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > > + int err; > > + > > + err = drm_panel_unprepare(ps_bridge->panel); > > + if (err) > > + DRM_ERROR("failed to unprepare panel: %d\n", err); > > +} > > + > > +static int ps8640_get_modes(struct drm_connector *connector) > > +{ > > + struct ps8640 *ps_bridge = connector_to_ps8640(connector); > > + > > + ps8640_prepare(ps_bridge); > > + > > + return drm_panel_get_modes(ps_bridge->panel); > > +} > > + > > +static struct drm_encoder *ps8640_best_encoder(struct drm_connector *connector) > > +{ > > + struct ps8640 *ps_bridge; > > + > > + ps_bridge = connector_to_ps8640(connector); > > + return ps_bridge->bridge.encoder; > > +} > > + > > +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = { > > + .get_modes = ps8640_get_modes, > > + .best_encoder = ps8640_best_encoder, > > +}; > > + > > +static enum drm_connector_status ps8640_detect(struct drm_connector *connector, > > + bool force) > > +{ > > + return connector_status_connected; > > +} > > + > > +static void ps8640_connector_destroy(struct drm_connector *connector) > > +{ > > + drm_connector_unregister(connector); > > + drm_connector_cleanup(connector); > > +} > > + > > +static const struct drm_connector_funcs ps8640_connector_funcs = { > > + .dpms = drm_atomic_helper_connector_dpms, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = ps8640_detect, > > + .destroy = ps8640_connector_destroy, > > + .reset = drm_atomic_helper_connector_reset, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +int ps8640_bridge_attach(struct drm_bridge *bridge) > > +{ > > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > > + int ret; > > + > > + if (!bridge->encoder) { > > + DRM_ERROR("Parent encoder object not found"); > > + return -ENODEV; > > + } > > + > > + ret = drm_connector_init(bridge->dev, &ps_bridge->connector, > > + &ps8640_connector_funcs, > > + DRM_MODE_CONNECTOR_eDP); > > + > > + if (ret) { > > + DRM_ERROR("Failed to initialize connector with drm: %d\n", ret); > > + return ret; > > + } > > + > > + drm_connector_helper_add(&ps_bridge->connector, > > + &ps8640_connector_helper_funcs); > > + drm_connector_register(&ps_bridge->connector); > > + > > + ps_bridge->connector.dpms = DRM_MODE_DPMS_ON; > > + drm_mode_connector_attach_encoder(&ps_bridge->connector, > > + bridge->encoder); > > + > > + if (ps_bridge->panel) > > + drm_panel_attach(ps_bridge->panel, &ps_bridge->connector); > > + > > + return ret; > > +} > > + > > +static bool ps8640_bridge_mode_fixup(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + struct drm_display_mode *adjusted_mode) > > +{ > > + return true; > > +} > > + > > +static const struct drm_bridge_funcs ps8640_bridge_funcs = { > > + .attach = ps8640_bridge_attach, > > + .mode_fixup = ps8640_bridge_mode_fixup, > > + .disable = ps8640_disable, > > + .post_disable = ps8640_post_disable, > > + .pre_enable = ps8640_pre_enable, > > + .enable = ps8640_enable, > > +}; > > + > > +static ssize_t ps8640_fw_file_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > > + > > + return scnprintf(buf, PAGE_SIZE, "%s\n", ps_bridge->fw_file); > > +} > > + > > +static int ps8640_update_file_name(struct device *dev, char **file_name, > > + const char *buf, size_t count) > > +{ > > + char *new_file_name; > > + > > + /* Simple sanity check */ > > + if (count > 64) { > > + dev_warn(dev, "File name too long\n"); > > + return -EINVAL; > > + } > > + > > + new_file_name = devm_kmalloc(dev, count + 1, GFP_KERNEL); > > + if (!new_file_name) > > + return -ENOMEM; > > + > > + memcpy(new_file_name, buf, count + 1); > > + > > + /* Echo into the sysfs entry may append newline at the end of buf */ > > + if (new_file_name[count - 1] == '\n') > > + count--; > > + > > + new_file_name[count] = '\0'; > > + > > + if (*file_name) > > + devm_kfree(dev, *file_name); > > + > > + *file_name = new_file_name; > > + > > + return 0; > > +} > > + > > +static ssize_t ps8640_fw_file_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > > + int ret; > > + > > + ret = ps8640_update_file_name(dev, &ps_bridge->fw_file, buf, count); > > + if (ret) > > + return ret; > > + > > + return count; > > +} > > + > > +/* Firmware Version is returned as Major.Minor.Build */ > > +static ssize_t ps8640_fw_version_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > > + struct ps8640_info *info = &ps_bridge->info; > > + > > + return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8, > > + info->version & 0xff); > > +} > > + > > +/* Hardware Version is returned as FamilyID.VariantID */ > > +static ssize_t ps8640_hw_version_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > > + struct ps8640_info *info = &ps_bridge->info; > > + > > + return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id, > > + info->variant_id); > > +} > > + > > +static int ps8640_spi_send_cmd(struct ps8640 *ps_bridge, u8 *cmd, u8 cmd_len) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + u8 i; > > + int ret; > > + > > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > > + if (ret) > > + goto err; > > + > > + /* write command in write port */ > > + for (i = 0; i < cmd_len; i++) { > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, cmd[i]); > > + if (ret) > > + goto err; > > + } > > + /* command length */ > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, cmd_len - 1); > > + if (ret) > > + goto err; > > + /* trigger read */ > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL, TRIGGER_NO_READBACK); > > + if (ret) > > + goto err; > > + > > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > > + if (ret) > > + goto err; > > + > > + return 0; > > + > > +err: > > + dev_err(&client->dev, "send command err: %d\n", ret); > > + return ret; > > +} > > + > > +static int ps8640_wait_spi_ready(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + u8 spi_rdy_st, retry_cnt = 0; > > + > > + do { > > + ps8640_regr(client, PAGE2_SPI_STATUS, &spi_rdy_st, 1); > > + msleep(20); > > + if ((retry_cnt == SPI_MAX_RETRY_CNT) && > > + ((spi_rdy_st & 0x0c) != 0x0c)) { > > + dev_err(&client->dev, "wait spi ready timeout\n"); > > + return -EBUSY; > > + } > > + } while ((retry_cnt++ < SPI_MAX_RETRY_CNT) && > > + (spi_rdy_st & 0x0c) == 0x0c); > > + > > + return 0; > > +} > > + > > +static int ps8640_wait_spi_nobusy(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + u8 spi_status, retry_cnt = 0; > > + int ret; > > + > > + do { > > + /* 0x05 RDSR; Read-Status-Register */ > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, 0x05); > > + if (ret) > > + goto err_send_cmd_exit; > > + > > + /* command length */ > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, 0x00); > > + if (ret) > > + goto err_send_cmd_exit; > > + > > + /* trigger read */ > > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL, > > + TRIGGER_READBACK); > > + if (ret) > > + goto err_send_cmd_exit; > > + > > + /* delay for cmd send */ > > + usleep_range(100, 300); > > + /* wait for SPI ROM until not busy */ > > + ret = ps8640_regr(client, PAGE2_SWSPI_RDATA, &spi_status, 1); > > + if (ret) > > + goto err_send_cmd_exit; > > + } while ((retry_cnt++ < SPI_MAX_RETRY_CNT) && > > + (spi_status & 0x0c) == 0x0c); > > + > > + if ((retry_cnt > SPI_MAX_RETRY_CNT) && (spi_status & 0x0c) != 0x0c) { > > + ret = -EBUSY; > > + dev_err(&client->dev, "wait spi no busy timeout: %d\n", ret); > > + goto err_timeout; > > + } > > + > > + return 0; > > + > > +err_send_cmd_exit: > > + dev_err(&client->dev, "send command err: %d\n", ret); > > + > > +err_timeout: > > + return ret; > > +} > > + > > +static int ps8640_wait_rom_idle(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[0]; > > + int ret; > > + > > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_wait_spi_ready(ps_bridge); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_wait_spi_nobusy(ps_bridge); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > > + if (ret) > > + goto exit; > > + > > +exit: > > + if (ret) > > + dev_err(&client->dev, "wait ps8640 rom idle fail: %d\n", ret); > > + > > + return ret; > > +} > > + > > +static int ps8640_spi_dl_mode(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + int ret; > > + > > + /* switch ps8640 mode to spi dl mode */ > > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 0); > > + > > + /* reset spi interface */ > > + ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0xc0); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0x40); > > + if (ret) > > + goto exit; > > + > > +exit: > > + if (ret) > > + dev_err(&client->dev, "fail reset spi interface: %d\n", ret); > > + > > + return ret; > > +} > > + > > +static int ps8640_rom_prepare(struct ps8640 *ps_bridge) > > +{ > > + struct i2c_client *client = ps_bridge->page[2]; > > + struct device *dev = &client->dev; > > + u8 i, cmd[2]; > > + int ret; > > + > > + /* Enable-Write-Status-Register */ > > + cmd[0] = 0x06; > > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > > + if (ret) { > > + dev_err(dev, "failed enable-write-status-register: %d\n", ret); > > + return ret; > > + } > > + > > + /* disable all protection */ > > + cmd[0] = 0x01; > > + cmd[1] = 0x00; > > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 2); > > + if (ret) { > > + dev_err(dev, "fail disable all protection: %d\n", ret); > > + return ret; > > + } > > + > > + /* wait for SPI module ready */ > > + ret = ps8640_wait_rom_idle(ps_bridge); > > + if (ret) { > > + dev_err(dev, "fail wait rom idle: %d\n", ret); > > + return ret; > > + } > > + > > + ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > > + for (i = 0; i < 6; i++) > > + ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, enc_ctrl_code[i]); > > + ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > > + > > + /* Enable-Write-Status-Register */ > > + cmd[0] = 0x06; > > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > > + if (ret) { > > + dev_err(dev, "fail enable-write-status-register: %d\n", ret); > > + return ret; > > + } > > + > > + /* chip erase command */ > > + cmd[0] = 0xc7; > > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > > + if (ret) { > > + dev_err(dev, "fail disable all protection: %d\n", ret); > > + return ret; > > + } > > + > > + ret = ps8640_wait_rom_idle(ps_bridge); > > + if (ret) { > > + dev_err(dev, "fail wait rom idle: %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int ps8640_validate_firmware(struct ps8640 *ps_bridge, > > + const struct firmware *fw) > > +{ > > + struct i2c_client *client = ps_bridge->page[0]; > > + struct ps8640_info *info = &ps_bridge->info; > > + u16 fw_chip_id, fw_version_id; > > + > > + /* > > + * Get the chip_id from the firmware. Make sure that it is the > > + * right controller to do the firmware and config update. > > + */ > > + fw_chip_id = get_unaligned_le16(fw->data + FW_CHIP_ID_OFFSET); > > + > > + if (fw_chip_id != 0x8640) { > > + dev_err(&client->dev, > > + "chip id mismatch: fw 0x%x vs. chip 0x8640\n", > > + fw_chip_id); > > + return -ENODEV; > > + } > > + > > + fw_version_id = get_unaligned_le16(fw->data + FW_VERSION_OFFSET); > > + > > + if (fw_chip_id != info->version) { > > + dev_err(&client->dev, > > + "fw version mismatch: fw %d.%d vs. chip %d.%d\n", > > + fw_version_id >> 8, fw_version_id & 0xff, > > + info->version >> 8, info->version & 0xff); > > + return -ENODEV; > > + } > > + > > + return 0; > > +} > > + > > +static int ps8640_write_rom(struct ps8640 *ps_bridge, const struct firmware *fw) > > +{ > > + struct i2c_client *client = ps_bridge->page[0]; > > + struct device *dev = &client->dev; > > + struct i2c_client *client2 = ps_bridge->page[2]; > > + struct i2c_client *client7 = ps_bridge->page[7]; > > + unsigned int pos = 0; > > + u8 progress_cnt, rom_page_id[2]; > > + int ret; > > + > > + ps8640_regw_byte(client2, PAGE2_SPI_CFG3, I2C_TO_SPI_RESET); > > + msleep(100); > > + ps8640_regw_byte(client2, PAGE2_SPI_CFG3, 0x00); > > + > > + while (pos < fw->size) { > > + rom_page_id[0] = (pos >> 8) & 0xFF; > > + rom_page_id[1] = (pos >> 16) & 0xFF; > > + ret = ps8640_regw(client2, PAGE2_ROMADD_BYTE1, rom_page_id, 2); > > + if (ret) > > + goto error; > > + ret = ps8640_regw(client7, 0, fw->data + pos, 256); > > + if (ret) > > + goto error; > > + > > + pos += 256; > > + if (progress_cnt != (pos * 100) / fw->size) { > > + progress_cnt = (pos * 100) / fw->size; > > + dev_info(dev, "fw update progress percent %d\n", > > + progress_cnt); > > + } > > + } > > + return 0; > > + > > +error: > > + dev_err(dev, "failed write extenal flash, %d\n", ret); > > + return ret; > > +} > > + > > +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge) > > +{ > > + u8 cmd[2]; > > + struct i2c_client *client = ps_bridge->page[2]; > > + > > + /* Enable-Write-Status-Register */ > > + cmd[0] = 0x06; > > + ps8640_spi_send_cmd(ps_bridge, cmd, 1); > > + > > + /* protect BPL/BP0/BP1 */ > > + cmd[0] = 0x01; > > + cmd[1] = 0x8c; > > + ps8640_spi_send_cmd(ps_bridge, cmd, 2); > > + > > + /* wait for SPI rom ready */ > > + ps8640_wait_rom_idle(ps_bridge); > > + > > + /* disable PS8640 mapping function */ > > + ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, 0x00); > > + > > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1); > > + return 0; > > +} > > + > > +static int ps8640_enter_bl(struct ps8640 *ps_bridge) > > +{ > > + int ret; > > + > > + ret = ps8640_spi_dl_mode(ps_bridge); > > + if (ret) > > + return ret; > > + > > + ps_bridge->in_fw_update = true; > > + return 0; > > +} > > + > > +static void ps8640_exit_bl(struct ps8640 *ps_bridge, const struct firmware *fw) > > +{ > > + ps_bridge->in_fw_update = false; > > + ps8640_spi_normal_mode(ps_bridge); > > +} > > + > > +static int ps8640_load_fw(struct ps8640 *ps_bridge, const struct firmware *fw) > > +{ > > + struct i2c_client *client = ps_bridge->page[0]; > > + struct device *dev = &client->dev; > > + int ret; > > + bool ps8640_status_backup = ps_bridge->enabled; > > + > > + if (!ps8640_in_bootloader(ps_bridge)) { > > + if (!ps8640_status_backup) > > + ps8640_prepare(ps_bridge); > > + > > + ret = ps8640_enter_bl(ps_bridge); > > + if (ret) > > + goto exit; > > + } > > + > > + ret = ps8640_validate_firmware(ps_bridge, fw); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_rom_prepare(ps_bridge); > > + if (ret) > > + goto exit; > > + > > + ret = ps8640_write_rom(ps_bridge, fw); > > + > > +exit: > > + if (ret) > > + dev_err(dev, "Failed to load firmware, %d\n", ret); > > + > > + ps8640_exit_bl(ps_bridge, fw); > > + if (!ps8640_status_backup) > > + ps8640_disable(&ps_bridge->bridge); > > + return ret; > > +} > > + > > +static ssize_t ps8640_update_fw_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct ps8640 *ps_bridge = i2c_get_clientdata(client); > > + const struct firmware *fw; > > + int error; > > + > > + error = request_firmware(&fw, ps_bridge->fw_file, dev); > > + if (error) { > > + dev_err(dev, "Unable to open firmware %s: %d\n", > > + ps_bridge->fw_file, error); > > + return error; > > + } > > + > > + error = ps8640_load_fw(ps_bridge, fw); > > + if (error) > > + dev_err(dev, "The firmware update failed(%d)\n", error); > > + else > > + dev_info(dev, "The firmware update succeeded\n"); > > + > > + release_firmware(fw); > > + return error ? error : count; > > +} > > + > > +static DEVICE_ATTR(fw_file, S_IRUGO | S_IWUSR, ps8640_fw_file_show, > > + ps8640_fw_file_store); > > +static DEVICE_ATTR(fw_version, S_IRUGO, ps8640_fw_version_show, NULL); > > +static DEVICE_ATTR(hw_version, S_IRUGO, ps8640_hw_version_show, NULL); > > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, ps8640_update_fw_store); > > + > > +static struct attribute *ps8640_attrs[] = { > > + &dev_attr_fw_file.attr, > > + &dev_attr_fw_version.attr, > > + &dev_attr_hw_version.attr, > > + &dev_attr_update_fw.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group ps8640_attr_group = { > > + .attrs = ps8640_attrs, > > +}; > > + > > +static void ps8640_remove_sysfs_group(void *data) > > +{ > > + struct ps8640 *ps_bridge = data; > > + > > + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group); > > +} > > + > > +/* for fireware update end */ > > + > > +static int ps8640_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct ps8640 *ps_bridge; > > + struct device_node *np = dev->of_node; > > + struct device_node *port, *out_ep; > > + struct device_node *panel_node = NULL; > > + int i, ret; > > + > > + ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL); > > + if (!ps_bridge) { > > + ret = -ENOMEM; > > + goto exit; > > + } > > + /* port@1 is ps8640 output port */ > > + port = of_graph_get_port_by_id(np, 1); > > + if (port) { > > + out_ep = of_get_child_by_name(port, "endpoint"); > > + of_node_put(port); > > + if (out_ep) { > > + panel_node = of_graph_get_remote_port_parent(out_ep); > > + of_node_put(out_ep); > > + } > > + } > > + if (panel_node) { > > + ps_bridge->panel = of_drm_find_panel(panel_node); > > + of_node_put(panel_node); > > + if (!ps_bridge->panel) { > > + ret = -EPROBE_DEFER; > > + goto exit; > > + } > > + } > > + > > + ps_bridge->pwr_3v3_supply = devm_regulator_get(dev, "vdd33"); > > + if (IS_ERR(ps_bridge->pwr_3v3_supply)) { > > + ret = PTR_ERR(ps_bridge->pwr_3v3_supply); > > + dev_err(dev, "cannot get vdd33 supply: %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->pwr_1v2_supply = devm_regulator_get(dev, "vdd12"); > > + if (IS_ERR(ps_bridge->pwr_1v2_supply)) { > > + ret = PTR_ERR(ps_bridge->pwr_1v2_supply); > > + dev_err(dev, "cannot get vdd12 supply: %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->gpio_mode_sel_n = devm_gpiod_get(&client->dev, "mode-sel", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(ps_bridge->gpio_mode_sel_n)) { > > + ret = PTR_ERR(ps_bridge->gpio_mode_sel_n); > > + dev_err(dev, "cannot get gpio_mode_sel_n %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->gpio_slp_n = devm_gpiod_get(&client->dev, "sleep", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(ps_bridge->gpio_slp_n)) { > > + ret = PTR_ERR(ps_bridge->gpio_slp_n); > > + dev_err(dev, "cannot get gpio_slp_n: %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(ps_bridge->gpio_rst_n)) { > > + ret = PTR_ERR(ps_bridge->gpio_rst_n); > > + dev_err(dev, "cannot get gpio_rst_n: %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->bridge.funcs = &ps8640_bridge_funcs; > > + ps_bridge->bridge.of_node = dev->of_node; > > + ret = drm_bridge_add(&ps_bridge->bridge); > > + if (ret) { > > + dev_err(dev, "Failed to add bridge: %d\n", ret); > > + goto exit; > > + } > > + > > + ret = ps8640_update_file_name(&client->dev, &ps_bridge->fw_file, > > + PS_FW_NAME, strlen(PS_FW_NAME)); > > + if (ret) { > > + dev_err(dev, "failed to update file name: %d\n", ret); > > + goto exit; > > + } > > + > > + ps_bridge->page[0] = client; > > + > > + /* ps8640 uses multiple addresses, use dummy devices for them > > + * page[0]: for DP control > > + * page[1]: for VIDEO Bridge > > + * page[2]: for control top > > + * page[3]: for DSI Link Control1 > > + * page[4]: for MIPI Phy > > + * page[5]: for VPLL > > + * page[6]: for DSI Link Control2 > > + * page[7]: for spi rom mapping > > + */ > > + for (i = 1; i < 8; i++) { > > + ps_bridge->page[i] = i2c_new_dummy(client->adapter, > > + client->addr + i); > > + if (!ps_bridge->page[i]) { > > + dev_err(dev, "failed i2c dummy device, address%02x\n", > > + client->addr + i); > > + ret = -EBUSY; > > + goto exit_dummy; > > + } > > + } > > + i2c_set_clientdata(client, ps_bridge); > > + > > + ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group); > > + if (ret) { > > + dev_err(dev, "failed to create sysfs entries: %d\n", ret); > > + goto exit_dummy; > > + } > > + > > + ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge); > > + if (ret) { > > + ps8640_remove_sysfs_group(ps_bridge); > > + dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret); > > + goto exit_dummy; > > + } > > + return 0; > > + > > +exit_dummy: > > + for (i = 1; i < 8; i++) > > + if (ps_bridge->page[i]) > > + i2c_unregister_device(ps_bridge->page[i]); > > + > > +exit: > > + return ret; > > +} > > + > > +static int ps8640_remove(struct i2c_client *client) > > +{ > > + struct ps8640 *ps_bridge = i2c_get_clientdata(client); > > + int i; > > + > > + for (i = 1; i < 8; i++) > > + if (ps_bridge->page[i]) > > + i2c_unregister_device(ps_bridge->page[i]); > > + > > + drm_bridge_remove(&ps_bridge->bridge); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id ps8640_i2c_table[] = { > > + {"parade,ps8640", 0}, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table); > > + > > +static const struct of_device_id ps8640_match[] = { > > + { .compatible = "parade,ps8640" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, ps8640_match); > > + > > +static struct i2c_driver ps8640_driver = { > > + .id_table = ps8640_i2c_table, > > + .probe = ps8640_probe, > > + .remove = ps8640_remove, > > + .driver = { > > + .name = "parade,ps8640", > > + .of_match_table = ps8640_match, > > + }, > > +}; > > +module_i2c_driver(ps8640_driver); > > + > > +MODULE_AUTHOR("Jitao Shi <jitao.shi@xxxxxxxxxxxx>"); > > +MODULE_AUTHOR("CK Hu <ck.hu@xxxxxxxxxxxx>"); > > +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver"); > > +MODULE_LICENSE("GPL v2"); > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
