This mux is supposed to select a fitting divider after the PLL
is already set to the correct rate.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Acked-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>
---
Changes since v7:
- The hdmi_sel mux is kept to propagate rate changes,
selecting the divider from the driver would only be necessary
for deep color modes, which are not supported.
---
drivers/clk/mediatek/clk-mt8173.c | 2 +-
drivers/clk/mediatek/clk-mtk.h | 7 +++++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 227e356..682b275 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -558,7 +558,7 @@ static const struct mtk_composite top_muxes[] __initconst = {
MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
/* CLK_CFG_6 */
- MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+ MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),
MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 32d2e45..b607996 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -83,7 +83,7 @@ struct mtk_composite {
signed char num_parents;
};
-#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \
+#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) { \
.id = _id, \
.name = _name, \
.mux_reg = _reg, \
@@ -94,9 +94,12 @@ struct mtk_composite {
.divider_shift = -1, \
.parent_names = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_SET_RATE_PARENT, \
+ .flags = _flags, \
}
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \
+ MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
+
#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
.id = _id, \
.name = _name, \
--
2.6.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
