Add driver for the TCON (timing controller) module. The TCON module
is a separate module attached after the DCU (display controller
unit). Each DCU instance has its own, directly connected TCON
instance. The DCU's RGB and timing signals are passing through
the TCON module. TCON can provide timing signals for raw TFT panels
or operate in a bypass mode which leaves all signals unaltered.
The driver currently only supports the bypass mode.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
.../devicetree/bindings/display/fsl,dcu.txt | 4 +
.../devicetree/bindings/display/fsl,tcon.txt | 18 +++
drivers/gpu/drm/fsl-dcu/Makefile | 3 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 6 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 1 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 11 ++
drivers/gpu/drm/fsl-dcu/fsl_tcon.c | 134 +++++++++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_tcon.h | 37 ++++++
8 files changed, 213 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/fsl,tcon.txt
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.c
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.h
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
index ebf1be9..8153c9a 100644
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -11,6 +11,9 @@ Required properties:
- big-endian Boolean property, LS1021A DCU registers are big-endian.
- fsl,panel: The phandle to panel node.
+Optional properties:
+- fsl,tcon: The phandle to the timing controller node.
+
Examples:
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
@@ -19,4 +22,5 @@ dcu: dcu@2ce0000 {
clock-names = "dcu";
big-endian;
fsl,panel = <&panel>;
+ fsl,tcon = <&tcon>;
};
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
new file mode 100644
index 0000000..2e1015e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -0,0 +1,18 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,vf610-tcon".
+
+- reg: Address and length of the register set for dcu.
+- clocks: From common clock binding: handle to tcon ipg clock.
+- clock-names: From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "okay";
+};
diff --git a/drivers/gpu/drm/fsl-dcu/Makefile b/drivers/gpu/drm/fsl-dcu/Makefile
index 6ea1523..b35a292 100644
--- a/drivers/gpu/drm/fsl-dcu/Makefile
+++ b/drivers/gpu/drm/fsl-dcu/Makefile
@@ -3,5 +3,6 @@ fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
fsl_dcu_drm_rgb.o \
fsl_dcu_drm_plane.o \
fsl_dcu_drm_crtc.o \
- fsl_dcu_drm_fbdev.o
+ fsl_dcu_drm_fbdev.o \
+ fsl_tcon.o
obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index e01c813..679cde8 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -27,6 +27,7 @@
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
+#include "fsl_tcon.h"
static bool fsl_dcu_drm_is_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -218,6 +219,7 @@ static int fsl_dcu_drm_pm_suspend(struct device *dev)
drm_kms_helper_poll_disable(fsl_dev->drm);
regcache_cache_only(fsl_dev->regmap, true);
regcache_mark_dirty(fsl_dev->regmap);
+ fsl_tcon_suspend(fsl_dev->tcon);
clk_disable(fsl_dev->clk);
clk_unprepare(fsl_dev->clk);
@@ -244,6 +246,8 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
return ret;
}
+ fsl_tcon_resume(fsl_dev->tcon);
+
drm_kms_helper_poll_enable(fsl_dev->drm);
regcache_cache_only(fsl_dev->regmap, false);
regcache_sync(fsl_dev->regmap);
@@ -338,6 +342,8 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
return PTR_ERR(fsl_dev->regmap);
}
+ fsl_dev->tcon = fsl_tcon_init(dev);
+
id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
if (!id)
return -ENODEV;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index 2a724f3..a8919f6 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -183,6 +183,7 @@ struct fsl_dcu_drm_device {
struct regmap *regmap;
int irq;
struct clk *clk;
+ struct fsl_tcon *tcon;
/*protects hardware register*/
spinlock_t irq_lock;
struct drm_device *drm;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
index fe8ab5d..65a2df0 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
@@ -17,6 +17,7 @@
#include <drm/drm_panel.h>
#include "fsl_dcu_drm_drv.h"
+#include "fsl_tcon.h"
static int
fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
@@ -28,10 +29,20 @@ fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+
+ if (fsl_dev->tcon)
+ fsl_tcon_disable(fsl_dev->tcon);
}
static void fsl_dcu_drm_encoder_enable(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+
+ if (fsl_dev->tcon)
+ fsl_tcon_enable(fsl_dev->tcon);
}
static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_tcon.c b/drivers/gpu/drm/fsl-dcu/fsl_tcon.c
new file mode 100644
index 0000000..de3c58b
--- /dev/null
+++ b/drivers/gpu/drm/fsl-dcu/fsl_tcon.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2015 Toradex AG
+ *
+ * Stefan Agner <stefan@xxxxxxxx>
+ *
+ * Freescale TCON device driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "fsl_tcon.h"
+
+void fsl_tcon_disable(struct fsl_tcon *tcon)
+{
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS, 0);
+
+ tcon->enabled = false;
+}
+
+void fsl_tcon_enable(struct fsl_tcon *tcon)
+{
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS,
+ FSL_TCON_CTRL1_TCON_BYPASS);
+
+ tcon->enabled = true;
+}
+
+void fsl_tcon_suspend(struct fsl_tcon *tcon)
+{
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS, 0);
+
+ clk_disable_unprepare(tcon->ipg_clk);
+}
+
+void fsl_tcon_resume(struct fsl_tcon *tcon)
+{
+ clk_prepare_enable(tcon->ipg_clk);
+
+ if (!tcon->enabled)
+ return;
+
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS,
+ FSL_TCON_CTRL1_TCON_BYPASS);
+}
+
+static struct regmap_config fsl_tcon_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .name = "tcon",
+};
+
+static int fsl_tcon_init_regmap(struct device *dev,
+ struct fsl_tcon *tcon,
+ struct device_node *np)
+{
+ struct resource res;
+ void __iomem *regs;
+ int ret;
+
+ ret = of_address_to_resource(np, 0, &res);
+ regs = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(regs)) {
+ dev_err(dev, "Couldn't map the TCON registers\n");
+ return PTR_ERR(regs);
+ }
+
+ tcon->regs = devm_regmap_init_mmio(dev, regs,
+ &fsl_tcon_regmap_config);
+ if (IS_ERR(tcon->regs)) {
+ dev_err(dev, "Couldn't create the TCON regmap\n");
+ return PTR_ERR(tcon->regs);
+ }
+
+ return 0;
+}
+
+struct fsl_tcon *fsl_tcon_init(struct device *dev)
+{
+ struct fsl_tcon *tcon;
+ struct device_node *np;
+ int ret;
+
+ tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
+ if (!tcon)
+ return NULL;
+
+ np = of_parse_phandle(dev->of_node, "fsl,tcon", 0);
+ if (!np) {
+ dev_warn(dev, "Couldn't find the tcon node\n");
+ return NULL;
+ }
+
+ ret = fsl_tcon_init_regmap(dev, tcon, np);
+ if (ret)
+ goto err_node_put;
+
+ tcon->ipg_clk = of_clk_get_by_name(np, "ipg");
+ if (IS_ERR(tcon->ipg_clk)) {
+ dev_err(dev, "Couldn't get the TCON bus clock\n");
+ goto err_free_regmap;
+ }
+
+ clk_prepare_enable(tcon->ipg_clk);
+
+ return tcon;
+
+err_free_regmap:
+err_node_put:
+ of_node_put(np);
+ return NULL;
+}
+
+void fsl_tcon_free(struct fsl_tcon *tcon)
+{
+ clk_disable_unprepare(tcon->ipg_clk);
+ clk_put(tcon->ipg_clk);
+}
+
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_tcon.h b/drivers/gpu/drm/fsl-dcu/fsl_tcon.h
new file mode 100644
index 0000000..199e6a1
--- /dev/null
+++ b/drivers/gpu/drm/fsl-dcu/fsl_tcon.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2015 Toradex AG
+ *
+ * Stefan Agner <stefan@xxxxxxxx>
+ *
+ * Freescale TCON device driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __FSL_TCON_H__
+#define __FSL_TCON_H__
+
+#include <linux/bitops.h>
+
+#define FSL_TCON_CTRL1 0x0
+#define FSL_TCON_CTRL1_TCON_BYPASS BIT(29)
+
+struct fsl_tcon {
+ struct regmap *regs;
+ struct clk *ipg_clk;
+
+ bool enabled;
+};
+
+struct fsl_tcon *fsl_tcon_init(struct device *dev);
+void fsl_tcon_free(struct fsl_tcon *tcon);
+
+void fsl_tcon_disable(struct fsl_tcon *tcon);
+void fsl_tcon_enable(struct fsl_tcon *tcon);
+void fsl_tcon_suspend(struct fsl_tcon *tcon);
+void fsl_tcon_resume(struct fsl_tcon *tcon);
+
+#endif /* __FSL_TCON_H__ */
--
2.6.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
