From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
The DT binding for the Exynos DRM Display Port (DP) driver isn't consistent
since it uses a phandle to describe the connection between the DP port and
the display panel but uses the OF graph ports and endpoints to describe the
connection betwen the DP port, a bridge chip and the panel.
The Exynos DP driver and the DT binding have been changed to allow also to
describe the DP port to panel connection using ports / endpoints (OF graph)
so this patch changes the Exynos5800 Peach Pi DT to make it consistent with
the Exynos5420 Peach Pit that has a eDP to LVDS chip and uses OF graph too.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Reviewed-by: Inki Dae <inki.dae@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5800-peach-pi.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 49a4f43..1cc2e95 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -122,6 +122,12 @@
compatible = "auo,b133htn01";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
};
mmc1_pwrseq: mmc1_pwrseq {
@@ -148,7 +154,14 @@
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
- panel = <&panel>;
+
+ ports {
+ port {
+ dp_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
};
&fimd {
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
