From: Mark Yao <yzq@xxxxxxxxxxxxxx>
Add bpc and color mode setting in rockchip_drm_vop driver, so
connector could try to use the edid drm_display_info to config
vop output mode.
Signed-off-by: Mark Yao <yzq@xxxxxxxxxxxxxx>
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Fix compiled error (Heiko)
- Using the connector display info message to configure eDP driver input
video mode, but hard code CRTC video output mode to RGBaaa.
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25 +++++++++++++++----
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 32 ++++++++++++++++++++++---
4 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 2c82a9a..3990951 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -180,14 +180,29 @@ static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder)
{
struct rockchip_dp_device *dp = to_dp(encoder);
+ struct drm_connector *cn = &dp->connector;
+ int ret = -1;
u32 val;
- int ret;
- ret = rockchip_drm_crtc_mode_config(encoder->crtc,
- DRM_MODE_CONNECTOR_eDP,
- ROCKCHIP_OUT_MODE_AAAA);
+ /*
+ * FIXME(Yakir): driver should configure the CRTC output video
+ * mode with the display information which indicated the monitor
+ * support colorimetry.
+ *
+ * But don't know why the CRTC driver seems could only output the
+ * RGBaaa rightly. For example, if connect the "innolux,n116bge"
+ * eDP screen, EDID would indicated that screen only accepted the
+ * 6bpc mode. But if I configure CRTC to RGB666 output, then eDP
+ * screen would show a blue picture (RGB888 show a green picture).
+ * But if I configure CTRC to RGBaaa, and eDP driver still keep
+ * RGB666 input video mode, then screen would works prefect.
+ */
+ if (cn->display_info.color_formats & DRM_COLOR_FORMAT_RGB444)
+ ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+ DRM_MODE_CONNECTOR_eDP,
+ 10, DRM_COLOR_FORMAT_RGB444);
if (ret < 0) {
- dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret);
+ dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret);
return;
}
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 80d6fc8..428a3c1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -215,7 +215,7 @@ static void dw_hdmi_rockchip_encoder_commit(struct drm_encoder *encoder)
static void dw_hdmi_rockchip_encoder_prepare(struct drm_encoder *encoder)
{
rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_HDMIA,
- ROCKCHIP_OUT_MODE_AAAA);
+ 10, DRM_COLOR_FORMAT_RGB444);
}
static struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs = {
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index dc4e5f0..ef1d7fb 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -59,7 +59,7 @@ void rockchip_unregister_crtc_funcs(struct drm_device *dev, int pipe);
int rockchip_drm_encoder_get_mux_id(struct device_node *node,
struct drm_encoder *encoder);
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc, int connector_type,
- int out_mode);
+ int bpc, int color);
int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
struct device *dev);
void rockchip_drm_dma_detach_device(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9ef4a1f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1062,14 +1062,40 @@ static const struct drm_plane_funcs vop_plane_funcs = {
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
int connector_type,
- int out_mode)
+ int bpc, int color)
{
struct vop *vop = to_vop(crtc);
+ /*
+ * RK3288 vop only support RGB Color output.
+ */
+ if (color != DRM_COLOR_FORMAT_RGB444) {
+ DRM_ERROR("Only support output RGB444, not support%d\n",
+ color);
+ return -EINVAL;
+ }
+
vop->connector_type = connector_type;
- vop->connector_out_mode = out_mode;
- return 0;
+ /*
+ * Fixme: I don't know how to describe the ROCKCHIP_OUT_MODE_P565's
+ * bpc, 5 or 6?
+ */
+ if (bpc >= 10) {
+ bpc = 10;
+ vop->connector_out_mode = ROCKCHIP_OUT_MODE_AAAA;
+ } else if (bpc >= 8) {
+ bpc = 8;
+ vop->connector_out_mode = ROCKCHIP_OUT_MODE_P888;
+ } else if (bpc >= 6) {
+ bpc = 6;
+ vop->connector_out_mode = ROCKCHIP_OUT_MODE_P666;
+ } else {
+ DRM_ERROR("unsupport bpc %d\n", bpc);
+ return -EINVAL;
+ }
+
+ return bpc;
}
EXPORT_SYMBOL_GPL(rockchip_drm_crtc_mode_config);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
