[PATCH 07/28] drm: Update drm_plane_funcs kerneldoc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- Merge the docbook into the kerneldoc comments.

- Spec in detail the precise semantics of the callbacks.

- For consistency in wording and easier review roll out kerneldoc also
  for crtc, encoder and connector for the standard hooks they share
  with planes.

Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
 Documentation/DocBook/gpu.tmpl | 104 ---------
 include/drm/drm_crtc.h         | 494 ++++++++++++++++++++++++++++++++++++++---
 2 files changed, 458 insertions(+), 140 deletions(-)

diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 8b298fc2dd4d..23ad100c2bf5 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -1279,28 +1279,12 @@ int max_width, max_height;</synopsis>
           <title>Miscellaneous</title>
           <itemizedlist>
             <listitem>
-              <synopsis>void (*set_property)(struct drm_crtc *crtc,
-                     struct drm_property *property, uint64_t value);</synopsis>
-              <para>
-                Set the value of the given CRTC property to
-                <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-                for more information about properties.
-              </para>
-            </listitem>
-            <listitem>
               <synopsis>void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
                         uint32_t start, uint32_t size);</synopsis>
               <para>
                 Apply a gamma table to the device. The operation is optional.
               </para>
             </listitem>
-            <listitem>
-              <synopsis>void (*destroy)(struct drm_crtc *crtc);</synopsis>
-              <para>
-                Destroy the CRTC when not needed anymore. See
-                <xref linkend="drm-kms-init"/>.
-              </para>
-            </listitem>
           </itemizedlist>
         </sect4>
       </sect3>
@@ -1357,52 +1341,6 @@ int max_width, max_height;</synopsis>
           primary plane with standard capabilities.
         </para>
       </sect3>
-      <sect3>
-        <title>Plane Operations</title>
-        <itemizedlist>
-          <listitem>
-            <synopsis>int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc,
-                        struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-                        unsigned int crtc_w, unsigned int crtc_h,
-                        uint32_t src_x, uint32_t src_y,
-                        uint32_t src_w, uint32_t src_h);</synopsis>
-            <para>
-              Enable and configure the plane to use the given CRTC and frame buffer.
-            </para>
-            <para>
-              The source rectangle in frame buffer memory coordinates is given by
-              the <parameter>src_x</parameter>, <parameter>src_y</parameter>,
-              <parameter>src_w</parameter> and <parameter>src_h</parameter>
-              parameters (as 16.16 fixed point values). Devices that don't support
-              subpixel plane coordinates can ignore the fractional part.
-            </para>
-            <para>
-              The destination rectangle in CRTC coordinates is given by the
-              <parameter>crtc_x</parameter>, <parameter>crtc_y</parameter>,
-              <parameter>crtc_w</parameter> and <parameter>crtc_h</parameter>
-              parameters (as integer values). Devices scale the source rectangle to
-              the destination rectangle. If scaling is not supported, and the source
-              rectangle size doesn't match the destination rectangle size, the
-              driver must return a -<errorname>EINVAL</errorname> error.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>int (*disable_plane)(struct drm_plane *plane);</synopsis>
-            <para>
-              Disable the plane. The DRM core calls this method in response to a
-              DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0.
-              Disabled planes must not be processed by the CRTC.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>void (*destroy)(struct drm_plane *plane);</synopsis>
-            <para>
-              Destroy the plane when not needed anymore. See
-              <xref linkend="drm-kms-init"/>.
-            </para>
-          </listitem>
-        </itemizedlist>
-      </sect3>
     </sect2>
     <sect2>
       <title>Encoders (struct <structname>drm_encoder</structname>)</title>
@@ -1459,27 +1397,6 @@ int max_width, max_height;</synopsis>
           encoders they want to use to a CRTC.
         </para>
       </sect3>
-      <sect3>
-        <title>Encoder Operations</title>
-        <itemizedlist>
-          <listitem>
-            <synopsis>void (*destroy)(struct drm_encoder *encoder);</synopsis>
-            <para>
-              Called to destroy the encoder when not needed anymore. See
-              <xref linkend="drm-kms-init"/>.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>void (*set_property)(struct drm_plane *plane,
-                     struct drm_property *property, uint64_t value);</synopsis>
-            <para>
-              Set the value of the given plane property to
-              <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-              for more information about properties.
-            </para>
-          </listitem>
-        </itemizedlist>
-      </sect3>
     </sect2>
     <sect2>
       <title>Connectors (struct <structname>drm_connector</structname>)</title>
@@ -1683,27 +1600,6 @@ int max_width, max_height;</synopsis>
             connector_status_unknown.
           </para>
         </sect4>
-        <sect4>
-          <title>Miscellaneous</title>
-          <itemizedlist>
-            <listitem>
-              <synopsis>void (*set_property)(struct drm_connector *connector,
-                     struct drm_property *property, uint64_t value);</synopsis>
-              <para>
-                Set the value of the given connector property to
-                <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-                for more information about properties.
-              </para>
-            </listitem>
-            <listitem>
-              <synopsis>void (*destroy)(struct drm_connector *connector);</synopsis>
-              <para>
-                Destroy the connector when not needed anymore. See
-                <xref linkend="drm-kms-init"/>.
-              </para>
-            </listitem>
-          </itemizedlist>
-        </sect4>
       </sect3>
     </sect2>
     <sect2>
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index ec3632e62b3f..340d750f1364 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -322,21 +322,12 @@ struct drm_crtc_state {
  * struct drm_crtc_funcs - control CRTCs for a given device
  * @save: save CRTC state
  * @restore: restore CRTC state
- * @reset: reset CRTC after state has been invalidated (e.g. resume)
  * @cursor_set: setup the cursor
  * @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set
  * @cursor_move: move the cursor
  * @gamma_set: specify color ramp for CRTC
- * @destroy: deinit and free object
- * @set_property: called when a property is changed
  * @set_config: apply a new CRTC configuration
  * @page_flip: initiate a page flip
- * @atomic_duplicate_state: duplicate the atomic state for this CRTC
- * @atomic_destroy_state: destroy an atomic state for this CRTC
- * @atomic_set_property: set a property on an atomic state for this CRTC
- *    (do not call directly, use drm_atomic_crtc_set_property())
- * @atomic_get_property: get a property on an atomic state for this CRTC
- *    (do not call directly, use drm_atomic_crtc_get_property())
  *
  * The drm_crtc_funcs structure is the central CRTC management structure
  * in the DRM.  Each CRTC controls one or more connectors (note that the name
@@ -352,7 +343,17 @@ struct drm_crtc_funcs {
 	void (*save)(struct drm_crtc *crtc); /* suspend? */
 	/* Restore CRTC state */
 	void (*restore)(struct drm_crtc *crtc); /* resume? */
-	/* Reset CRTC state */
+
+	/**
+	 * @reset:
+	 *
+	 * Reset CRTC hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 *
+	 * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
+	 * atomic state using this hook.
+	 */
 	void (*reset)(struct drm_crtc *crtc);
 
 	/* cursor controls */
@@ -366,7 +367,14 @@ struct drm_crtc_funcs {
 	/* Set gamma on the CRTC */
 	void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
 			  uint32_t start, uint32_t size);
-	/* Object destroy routine */
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up CRTC resources. This is only called at driver unload time
+	 * through drm_mode_config_cleanup(), but can also be called at runtime
+	 * when a CRTC is being hot-unplugged.
+	 */
 	void (*destroy)(struct drm_crtc *crtc);
 
 	int (*set_config)(struct drm_mode_set *set);
@@ -385,17 +393,130 @@ struct drm_crtc_funcs {
 			 struct drm_pending_vblank_event *event,
 			 uint32_t flags);
 
+	/**
+	 * @set_property:
+	 *
+	 * This is the legacy entry point to update a property attach to the
+	 * CRTC.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_crtc_set_property() to implement this hook.
+	 *
+	 * This callback is optional if the driver does not support any legacy
+	 * driver-private properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
 	int (*set_property)(struct drm_crtc *crtc,
 			    struct drm_property *property, uint64_t val);
 
-	/* atomic update handling */
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current atomic state for this CRTC and return it.
+	 * The core and helpers gurantee that any atomic state duplicated with
+	 * this hook and still owned by the caller (i.e. not transferred to the
+	 * driver by calling ->atomic_commit() from struct
+	 * &drm_mode_config_funcs) will be cleaned up by calling the
+	 * @atomic_destroy_state hook in this structure.
+	 *
+	 * Atomic drivers which don't subclass struct &drm_crtc should use
+	 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
+	 * state structure to extend it with driver-private state should use
+	 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
+	 * duplicated in a consisten fashion across drivers.
+	 *
+	 * It is an error to call this hook before crtc->state has been
+	 * initialized correctly.
+	 *
+	 * NOTE:
+	 *
+	 * If the duplicate state references refcounted resources this hook must
+	 * acquire a reference for each of them. The driver must release these
+	 * references again in @atomic_destroy_state.
+	 *
+	 * RETURNS:
+	 *
+	 * Duplicated atomic state or NULL when the allocation failed.
+	 */
 	struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Destroy a state duplicated with @atomic_duplicate_state and release
+	 * or unreference all resources it references
+	 */
 	void (*atomic_destroy_state)(struct drm_crtc *crtc,
 				     struct drm_crtc_state *state);
+
+	/**
+	 * @atomic_set_property:
+	 *
+	 * Decode a driver-private property value and store the decoded value
+	 * into the passed-in state structure. Since the atomic core decodes all
+	 * standardized properties (even for extensions beyond the core set of
+	 * properties which might not be implemented by all drivers) this
+	 * requires drivers to subclass the state structure.
+	 *
+	 * Such driver-private properties should really only implemented for
+	 * truly hardware/vendor specific state. Instead it is preferred to
+	 * standardize atomic extension and decode the properties used to expose
+	 * such an extension in the core.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_crtc_set_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * NOTE:
+	 *
+	 * This function is called in the state assembly phase of atomic
+	 * modesets, which can be aborted for any reason (including on
+	 * userspace's request to just check whether a configuration would be
+	 * possible). Drivers MUST NOT touch any persistent state (hardware or
+	 * software) or data structures except the passed in adjusted_mode
+	 * parameter.
+	 *
+	 * Also since userspace controls in which order properties are set this
+	 * function must not do any input validation (since the state update is
+	 * incompletely and hence likely inconsistent). Instead any such input
+	 * validation must be done in the various atomic_check callbacks.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 if the property has been found, -EINVAL if the property isn't
+	 * implemented by the driver (which shouldn't ever happen, the core only
+	 * asks for properties attached to this CRTC). No other
+	 * validation is allowed by the driver. The core checks that the
+	 * property value is within the range (integer, valid enum value, ...)
+	 * the driver set when registering the property already.
+	 */
 	int (*atomic_set_property)(struct drm_crtc *crtc,
 				   struct drm_crtc_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+	/**
+	 * @atomic_get_property:
+	 *
+	 * Reads out the decoded driver-private property. This is used to
+	 * implement the GETCRTC ioctl.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_crtc_get_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if ther property isn't implemented by the
+	 * driver (which shouldn't ever happen, the core only asks for
+	 * properties attached on this CRTC).
+	 */
 	int (*atomic_get_property)(struct drm_crtc *crtc,
 				   const struct drm_crtc_state *state,
 				   struct drm_property *property,
@@ -507,18 +628,9 @@ struct drm_connector_state {
  * @dpms: set power state
  * @save: save connector state
  * @restore: restore connector state
- * @reset: reset connector after state has been invalidated (e.g. resume)
  * @detect: is this connector active?
  * @fill_modes: fill mode list for this connector
- * @set_property: property for this connector may need an update
- * @destroy: make object go away
  * @force: notify the driver that the connector is forced on
- * @atomic_duplicate_state: duplicate the atomic state for this connector
- * @atomic_destroy_state: destroy an atomic state for this connector
- * @atomic_set_property: set a property on an atomic state for this connector
- *    (do not call directly, use drm_atomic_connector_set_property())
- * @atomic_get_property: get a property on an atomic state for this connector
- *    (do not call directly, use drm_atomic_connector_get_property())
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -528,6 +640,17 @@ struct drm_connector_funcs {
 	int (*dpms)(struct drm_connector *connector, int mode);
 	void (*save)(struct drm_connector *connector);
 	void (*restore)(struct drm_connector *connector);
+
+	/**
+	 * @reset:
+	 *
+	 * Reset connector hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 *
+	 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
+	 * atomic state using this hook.
+	 */
 	void (*reset)(struct drm_connector *connector);
 
 	/* Check to see if anything is attached to the connector.
@@ -539,19 +662,142 @@ struct drm_connector_funcs {
 	enum drm_connector_status (*detect)(struct drm_connector *connector,
 					    bool force);
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+
+	/**
+	 * @set_property:
+	 *
+	 * This is the legacy entry point to update a property attach to the
+	 * connector.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_connector_set_property() to implement this hook.
+	 *
+	 * This callback is optional if the driver does not support any legacy
+	 * driver-private properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up connector resources. This is only called at driver unload time
+	 * through drm_mode_config_cleanup(), but can also be called at runtime
+	 * when a connector is being hot-unplugged.
+	 */
 	void (*destroy)(struct drm_connector *connector);
 	void (*force)(struct drm_connector *connector);
 
-	/* atomic update handling */
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current atomic state for this connector and return it.
+	 * The core and helpers gurantee that any atomic state duplicated with
+	 * this hook and still owned by the caller (i.e. not transferred to the
+	 * driver by calling ->atomic_commit() from struct
+	 * &drm_mode_config_funcs) will be cleaned up by calling the
+	 * @atomic_destroy_state hook in this structure.
+	 *
+	 * Atomic drivers which don't subclass struct &drm_connector_state should use
+	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
+	 * state structure to extend it with driver-private state should use
+	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
+	 * duplicated in a consisten fashion across drivers.
+	 *
+	 * It is an error to call this hook before connector->state has been
+	 * initialized correctly.
+	 *
+	 * NOTE:
+	 *
+	 * If the duplicate state references refcounted resources this hook must
+	 * acquire a reference for each of them. The driver must release these
+	 * references again in @atomic_destroy_state.
+	 *
+	 * RETURNS:
+	 *
+	 * Duplicated atomic state or NULL when the allocation failed.
+	 */
 	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Destroy a state duplicated with @atomic_duplicate_state and release
+	 * or unreference all resources it references
+	 */
 	void (*atomic_destroy_state)(struct drm_connector *connector,
 				     struct drm_connector_state *state);
+
+	/**
+	 * @atomic_set_property:
+	 *
+	 * Decode a driver-private property value and store the decoded value
+	 * into the passed-in state structure. Since the atomic core decodes all
+	 * standardized properties (even for extensions beyond the core set of
+	 * properties which might not be implemented by all drivers) this
+	 * requires drivers to subclass the state structure.
+	 *
+	 * Such driver-private properties should really only implemented for
+	 * truly hardware/vendor specific state. Instead it is preferred to
+	 * standardize atomic extension and decode the properties used to expose
+	 * such an extension in the core.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_connector_set_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * NOTE:
+	 *
+	 * This function is called in the state assembly phase of atomic
+	 * modesets, which can be aborted for any reason (including on
+	 * userspace's request to just check whether a configuration would be
+	 * possible). Drivers MUST NOT touch any persistent state (hardware or
+	 * software) or data structures except the passed in adjusted_mode
+	 * parameter.
+	 *
+	 * Also since userspace controls in which order properties are set this
+	 * function must not do any input validation (since the state update is
+	 * incompletely and hence likely inconsistent). Instead any such input
+	 * validation must be done in the various atomic_check callbacks.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 if the property has been found, -EINVAL if the property isn't
+	 * implemented by the driver (which shouldn't ever happen, the core only
+	 * asks for properties attached to this connector). No other
+	 * validation is allowed by the driver. The core checks that the
+	 * property value is within the range (integer, valid enum value, ...)
+	 * the driver set when registering the property already.
+	 */
 	int (*atomic_set_property)(struct drm_connector *connector,
 				   struct drm_connector_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+
+	/**
+	 * @atomic_get_property:
+	 *
+	 * Reads out the decoded driver-private property. This is used to
+	 * implement the GETCONNECTOR ioctl.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_connector_get_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if ther property isn't implemented by the
+	 * driver (which shouldn't ever happen, the core only asks for
+	 * properties attached on this connector).
+	 */
 	int (*atomic_get_property)(struct drm_connector *connector,
 				   const struct drm_connector_state *state,
 				   struct drm_property *property,
@@ -560,13 +806,25 @@ struct drm_connector_funcs {
 
 /**
  * struct drm_encoder_funcs - encoder controls
- * @reset: reset state (e.g. at init or resume time)
- * @destroy: cleanup and free associated data
  *
  * Encoders sit between CRTCs and connectors.
  */
 struct drm_encoder_funcs {
+	/**
+	 * @reset:
+	 *
+	 * Reset encoder hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 */
 	void (*reset)(struct drm_encoder *encoder);
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up encoder resources. This is only called at driver unload time
+	 * through drm_mode_config_cleanup() since encoder cannot be hotplugged in DRM.
+	 */
 	void (*destroy)(struct drm_encoder *encoder);
 };
 
@@ -787,40 +1045,203 @@ struct drm_plane_state {
 
 /**
  * struct drm_plane_funcs - driver plane control functions
- * @update_plane: update the plane configuration
- * @disable_plane: shut down the plane
- * @destroy: clean up plane resources
- * @reset: reset plane after state has been invalidated (e.g. resume)
- * @set_property: called when a property is changed
- * @atomic_duplicate_state: duplicate the atomic state for this plane
- * @atomic_destroy_state: destroy an atomic state for this plane
- * @atomic_set_property: set a property on an atomic state for this plane
- *    (do not call directly, use drm_atomic_plane_set_property())
- * @atomic_get_property: get a property on an atomic state for this plane
- *    (do not call directly, use drm_atomic_plane_get_property())
  */
 struct drm_plane_funcs {
+	/**
+	 * @update_plane:
+	 *
+	 * This is the legacy entry point to enable and configure the plane for
+	 * the given CRTC and framebuffer. It is never called to disable the
+	 * plane, i.e. the passed-in crtc and fb paramters are never NULL.
+	 *
+	 * The source rectangle in frame buffer memory coordinates is given by
+	 * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
+	 * values). Devices that don't support subpixel plane coordinates can
+	 * ignore the fractional part.
+	 *
+	 * The destination rectangle in CRTC coordinates is given by the
+	 * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
+	 * Devices scale the source rectangle to the destination rectangle. If
+	 * scaling is not supported, and the source rectangle size doesn't match
+	 * the destination rectangle size, the driver must return a
+	 * -<errorname>EINVAL</errorname> error.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_update_plane() to implement this hook.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
 	int (*update_plane)(struct drm_plane *plane,
 			    struct drm_crtc *crtc, struct drm_framebuffer *fb,
 			    int crtc_x, int crtc_y,
 			    unsigned int crtc_w, unsigned int crtc_h,
 			    uint32_t src_x, uint32_t src_y,
 			    uint32_t src_w, uint32_t src_h);
+
+	/**
+	 * @disable_plane:
+	 *
+	 * This is the legacy entry point to disable the plane. The DRM core
+	 * calls this method in response to a DRM_IOCTL_MODE_SETPLANE ioctl call
+	 * with the frame buffer ID set to 0.  Disabled planes must not be
+	 * processed by the CRTC.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_disable_plane() to implement this hook.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
 	int (*disable_plane)(struct drm_plane *plane);
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up plane resources. This is only called at driver unload time
+	 * through drm_mode_config_cleanup() since plane cannot be hotplugged in DRM.
+	 */
 	void (*destroy)(struct drm_plane *plane);
+
+	/**
+	 * @reset:
+	 *
+	 * Reset plane hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 *
+	 * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
+	 * atomic state using this hook.
+	 */
 	void (*reset)(struct drm_plane *plane);
 
+	/**
+	 * @set_property:
+	 *
+	 * This is the legacy entry point to update a property attach to the
+	 * plane.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_plane_set_property() to implement this hook.
+	 *
+	 * This callback is optional if the driver does not support any legacy
+	 * driver-private properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
 	int (*set_property)(struct drm_plane *plane,
 			    struct drm_property *property, uint64_t val);
 
-	/* atomic update handling */
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current atomic state for this plane and return it.
+	 * The core and helpers gurantee that any atomic state duplicated with
+	 * this hook and still owned by the caller (i.e. not transferred to the
+	 * driver by calling ->atomic_commit() from struct
+	 * &drm_mode_config_funcs) will be cleaned up by calling the
+	 * @atomic_destroy_state hook in this structure.
+	 *
+	 * Atomic drivers which don't subclass struct &drm_plane_state should use
+	 * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
+	 * state structure to extend it with driver-private state should use
+	 * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
+	 * duplicated in a consisten fashion across drivers.
+	 *
+	 * It is an error to call this hook before plane->state has been
+	 * initialized correctly.
+	 *
+	 * NOTE:
+	 *
+	 * If the duplicate state references refcounted resources this hook must
+	 * acquire a reference for each of them. The driver must release these
+	 * references again in @atomic_destroy_state.
+	 *
+	 * RETURNS:
+	 *
+	 * Duplicated atomic state or NULL when the allocation failed.
+	 */
 	struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Destroy a state duplicated with @atomic_duplicate_state and release
+	 * or unreference all resources it references
+	 */
 	void (*atomic_destroy_state)(struct drm_plane *plane,
 				     struct drm_plane_state *state);
+
+	/**
+	 * @atomic_set_property:
+	 *
+	 * Decode a driver-private property value and store the decoded value
+	 * into the passed-in state structure. Since the atomic core decodes all
+	 * standardized properties (even for extensions beyond the core set of
+	 * properties which might not be implemented by all drivers) this
+	 * requires drivers to subclass the state structure.
+	 *
+	 * Such driver-private properties should really only implemented for
+	 * truly hardware/vendor specific state. Instead it is preferred to
+	 * standardize atomic extension and decode the properties used to expose
+	 * such an extension in the core.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_plane_set_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * NOTE:
+	 *
+	 * This function is called in the state assembly phase of atomic
+	 * modesets, which can be aborted for any reason (including on
+	 * userspace's request to just check whether a configuration would be
+	 * possible). Drivers MUST NOT touch any persistent state (hardware or
+	 * software) or data structures except the passed in adjusted_mode
+	 * parameter.
+	 *
+	 * Also since userspace controls in which order properties are set this
+	 * function must not do any input validation (since the state update is
+	 * incompletely and hence likely inconsistent). Instead any such input
+	 * validation must be done in the various atomic_check callbacks.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 if the property has been found, -EINVAL if the property isn't
+	 * implemented by the driver (which shouldn't ever happen, the core only
+	 * asks for properties attached to this plane). No other
+	 * validation is allowed by the driver. The core checks that the
+	 * property value is within the range (integer, valid enum value, ...)
+	 * the driver set when registering the property already.
+	 */
 	int (*atomic_set_property)(struct drm_plane *plane,
 				   struct drm_plane_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+
+	/**
+	 * @atomic_get_property:
+	 *
+	 * Reads out the decoded driver-private property. This is used to
+	 * implement the GETPLANE ioctl.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_plane_get_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if ther property isn't implemented by the
+	 * driver (which shouldn't ever happen, the core only asks for
+	 * properties attached on this plane).
+	 */
 	int (*atomic_get_property)(struct drm_plane *plane,
 				   const struct drm_plane_state *state,
 				   struct drm_property *property,
@@ -833,6 +1254,7 @@ enum drm_plane_type {
 	DRM_PLANE_TYPE_CURSOR,
 };
 
+
 /**
  * struct drm_plane - central DRM plane control structure
  * @dev: DRM device this plane belongs to
-- 
2.5.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux