On Tue, Nov 24, 2015 at 10:31:41PM +0200, Ville Syrjälä wrote:
> On Mon, Nov 02, 2015 at 12:33:48PM -0800, Rafael Antognolli wrote:
> > So far, the i915 driver and some other drivers set it to the drm_device,
> > which doesn't allow one to know which DP a given aux channel is related
> > to. Changing this to be the drm_connector provides proper nesting, still
> > allowing one to get the drm_device from it. Some drivers already set it
> > to the drm_connector.
> >
> > This also removes the need to add a sysfs link for the i2c device under
> > the connector, as it will already be there.
> >
> > Signed-off-by: Rafael Antognolli <rafael.antognolli@xxxxxxxxx>
>
> I gave aux_dev a bit of a testing here, and it appaers to work quite
> splendidly.
>
> This patch however causes lots of WARN spew if I unload the driver
> while in middle of dumping the DPCD via the aux_dev. It appears we
> we clean up things the wrong order now.
It looks like device_destroy is being called twice on the drm_aux_dev
and i2c adapter devices.
If I understood correctly, this is happening because I changed the
parent device, from the drm_device to the drm_connector, but the
drm_connector is being destroyed before the drm_aux_dev and i2c adapter
devices, which already causes them to be destroyed too.
Changing the drm_dp_aux_unregister() from inside intel_dp_aux_fini() to
intel_dp_connector_unregister(), right before
intel_connector_unregister(), seems to fix everything, and it still
makes sense in my opinion, since the auxdev is going to be unregistered
before we destroy the drm_connector. Do you think that would be ok?
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 19 ++-----------------
> > 1 file changed, 2 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 8287df4..7aacc08 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -1078,36 +1078,21 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> > intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
> >
> > intel_dp->aux.name = name;
> > - intel_dp->aux.dev = dev->dev;
> > + intel_dp->aux.dev = connector->base.kdev;
> > intel_dp->aux.transfer = intel_dp_aux_transfer;
> >
> > DRM_DEBUG_KMS("registering %s bus for %s\n", name,
> > connector->base.kdev->kobj.name);
> >
> > ret = drm_dp_aux_register(&intel_dp->aux);
> > - if (ret < 0) {
> > + if (ret < 0)
> > DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
> > name, ret);
> > - return;
> > - }
> > -
> > - ret = sysfs_create_link(&connector->base.kdev->kobj,
> > - &intel_dp->aux.ddc.dev.kobj,
> > - intel_dp->aux.ddc.dev.kobj.name);
> > - if (ret < 0) {
> > - DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> > - drm_dp_aux_unregister(&intel_dp->aux);
> > - }
> > }
> >
> > static void
> > intel_dp_connector_unregister(struct intel_connector *intel_connector)
> > {
> > - struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
> > -
> > - if (!intel_connector->mst_port)
> > - sysfs_remove_link(&intel_connector->base.kdev->kobj,
> > - intel_dp->aux.ddc.dev.kobj.name);
> > intel_connector_unregister(intel_connector);
> > }
> >
> > --
> > 2.4.3
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
