[PATCH v3 6/9] exynos: fimg2d: add g2d_set_direction

[Hyungwon Hwang <human.hwang@xxxxxxxxxxx>]

From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>

This allows setting the two direction registers, which specify how
the engine blits pixels. This can be used for overlapping blits,
which happen e.g. when 'moving' a rectangular region inside a
fixed buffer.

Reviewed-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
---
Changes for v3:
- Definitions of e_g2d_dir_mode, g2d_direction_val are moved to source file
from header file

 exynos/exynos_fimg2d.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/exynos/exynos_fimg2d.c b/exynos/exynos_fimg2d.c
index b10620b..3bef93b 100644
--- a/exynos/exynos_fimg2d.c
+++ b/exynos/exynos_fimg2d.c
@@ -65,6 +65,44 @@ enum g2d_base_addr_reg {
 	g2d_src
 };

+enum e_g2d_dir_mode {
+	G2D_DIR_MODE_POSITIVE = 0,
+	G2D_DIR_MODE_NEGATIVE = 1
+};
+
+union g2d_direction_val {
+	unsigned int val[2];
+	struct {
+		/* SRC_MSK_DIRECT_REG [0:1] (source) */
+		enum e_g2d_dir_mode		src_x_direction:1;
+		enum e_g2d_dir_mode		src_y_direction:1;
+
+		/* SRC_MSK_DIRECT_REG [2:3] */
+		unsigned int			reversed1:2;
+
+		/* SRC_MSK_DIRECT_REG [4:5] (mask) */
+		enum e_g2d_dir_mode		mask_x_direction:1;
+		enum e_g2d_dir_mode		mask_y_direction:1;
+
+		/* SRC_MSK_DIRECT_REG [6:31] */
+		unsigned int			padding1:26;
+
+		/* DST_PAT_DIRECT_REG [0:1] (destination) */
+		enum e_g2d_dir_mode		dst_x_direction:1;
+		enum e_g2d_dir_mode		dst_y_direction:1;
+
+		/* DST_PAT_DIRECT_REG [2:3] */
+		unsigned int			reversed2:2;
+
+		/* DST_PAT_DIRECT_REG [4:5] (pattern) */
+		enum e_g2d_dir_mode		pat_x_direction:1;
+		enum e_g2d_dir_mode		pat_y_direction:1;
+
+		/* DST_PAT_DIRECT_REG [6:31] */
+		unsigned int			padding2:26;
+	} data;
+};
+
 static unsigned int g2d_get_scaling(unsigned int src, unsigned int dst)
 {
 	/*
@@ -242,6 +280,19 @@ static void g2d_add_base_addr(struct g2d_context *ctx, struct g2d_image *img,
 }

 /*
+ * g2d_set_direction - setup direction register (useful for overlapping blits).
+ *
+ * @ctx: a pointer to g2d_context structure.
+ * @dir: a pointer to the g2d_direction_val structure.
+ */
+static void g2d_set_direction(struct g2d_context *ctx,
+			const union g2d_direction_val *dir)
+{
+	g2d_add_cmd(ctx, SRC_MASK_DIRECT_REG, dir->val[0]);
+	g2d_add_cmd(ctx, DST_PAT_DIRECT_REG, dir->val[1]);
+}
+
+/*
  * g2d_reset - reset fimg2d hardware.
  *
  * @ctx: a pointer to g2d_context structure.
--
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel