[PATCH v3] drm/exynos: add pm_runtime to FIMD

[Inki Dae <inki.dae@xxxxxxxxxxx>]

From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Chnagelog v3:
- Revive suspended varable to check the suspend status.

Changelog v2:
- Remove unnecessary changes which removed commit callback from decon drivers
  and modify CONFIG_PM_SLEEP -> CONFIG_PM

Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
---
 drivers/gpu/drm/exynos/exynos_drm_fimd.c | 54 ++++++++++++++++++++++----------
 1 file changed, 37 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index bd75c15..2c38323 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -745,7 +745,6 @@ static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
 static void fimd_enable(struct exynos_drm_crtc *crtc)
 {
 	struct fimd_context *ctx = crtc->ctx;
-	int ret;
 
 	if (!ctx->suspended)
 		return;
@@ -754,18 +753,6 @@ static void fimd_enable(struct exynos_drm_crtc *crtc)
 
 	pm_runtime_get_sync(ctx->dev);
 
-	ret = clk_prepare_enable(ctx->bus_clk);
-	if (ret < 0) {
-		DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret);
-		return;
-	}
-
-	ret = clk_prepare_enable(ctx->lcd_clk);
-	if  (ret < 0) {
-		DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret);
-		return;
-	}
-
 	/* if vblank was enabled status, enable it again. */
 	if (test_and_clear_bit(0, &ctx->irq_flags))
 		fimd_enable_vblank(ctx->crtc);
@@ -795,11 +782,7 @@ static void fimd_disable(struct exynos_drm_crtc *crtc)
 
 	writel(0, ctx->regs + VIDCON0);
 
-	clk_disable_unprepare(ctx->lcd_clk);
-	clk_disable_unprepare(ctx->bus_clk);
-
 	pm_runtime_put_sync(ctx->dev);
-
 	ctx->suspended = true;
 }
 
@@ -1121,12 +1104,49 @@ static int fimd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int exynos_fimd_suspend(struct device *dev)
+{
+	struct fimd_context *ctx = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(ctx->lcd_clk);
+	clk_disable_unprepare(ctx->bus_clk);
+
+	return 0;
+}
+
+static int exynos_fimd_resume(struct device *dev)
+{
+	struct fimd_context *ctx = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(ctx->bus_clk);
+	if (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(ctx->lcd_clk);
+	if  (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_fimd_pm_ops = {
+	SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL)
+};
+
 struct platform_driver fimd_driver = {
 	.probe		= fimd_probe,
 	.remove		= fimd_remove,
 	.driver		= {
 		.name	= "exynos4-fb",
 		.owner	= THIS_MODULE,
+		.pm	= &exynos_fimd_pm_ops,
 		.of_match_table = fimd_driver_dt_match,
 	},
 };
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel