Re: [Intel-gfx] [PATCH 11/9] drm/i915: Opt out of vblank disable timer on >gen2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 19, 2015 at 10:53:30PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 19, 2015 at 06:35:04PM -0200, Paulo Zanoni wrote:
> > 2015-11-19 18:06 GMT-02:00 Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>:
> > > On Thu, Nov 19, 2015 at 05:44:51PM -0200, Paulo Zanoni wrote:
> > >> 2014-05-26 11:26 GMT-03:00  <ville.syrjala@xxxxxxxxxxxxxxx>:
> > >> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >> >
> > >> > Now that the vblank races are plugged, we can opt out of using
> > >> > the vblank disable timer and just let vblank interrupts get
> > >> > disabled immediately when the last reference is dropped.
> > >> >
> > >> > Gen2 is the exception since it has no hardware frame counter.
> > >>
> > >> Hi
> > >>
> > >> Remember last week's FBC vblank optimization patch that had an
> > >> erroneous drm_crtc_vblank_get() instead of drm_crtc_vblank_count()?
> > >> After I fixed the bug in the patch I realized that it was the
> > >> unbalanced vblank_get() call that moved PC state residency up.
> > >>
> > >> I did some experiments, and on my specific BDW machine, after running
> > >> "powertop --auto-tune", I get about 15-25% PC7 residency without FBC.
> > >> If I revert this patch, the number jumps to 40-45%. With FBC, the PC7
> > >> residency goes from 60-70% to 85-90% when I revert this patch. I'm
> > >> running just an idle Cinnamon with an open terminal.
> > >>
> > >> So, since the commit message lacks more details, what are the
> > >> downsides of reverting this patch? What are the advantages of opting
> > >> out of the vblank timer? I see my desktop does tons and tons of vblank
> > >> get/put calls per second, so the disable timer makes a lot of sense.
> > >
> > > "Idle" desktop :(
> > 
> > My first realization of this little problem was when I was
> > implementing runtime PM :)
> > 
> > 
> > >
> > > Really the immediate disable should save power. Where are these tons of
> > > vblank get/puts coming from actually?
> > 
> > I'll take a finer look tomorrow, but I assume it's probably some
> > application redrawing. I see it does calm down sometimes, but that's
> > not enough to get better PC7 residency.
> > 
> > 
> > > I would assume you'd get a handful
> > > per frame at most, and that when you're actually doing something. On an
> > > idle system I would expect nothing at all happens during most frames.
> > >
> > > Not sure, but I guess it's possible the extra register accesses in the
> > > get/puts actually cause the display to exit low power states all the time,
> > > or something.
> > 
> > I tried replacing the register macros with the _FW version and that didn't help.
> 
> Well, that would just get rid of the unclaimed reg checks. Nothing more
> I think.
> 
> > 
> > 
> > >
> > > There's also this note in Bspec (for HSW at least):
> > 
> > I think this not is present on most (all?) gens.
> 
> Doesn't really prove anything.
> 
> > >  "Workaround : Do not enable and unmask this interrupt if the associated
> > >   pipe is disabled.  Do not leave this interrupt enabled and unmasked
> > >   after the associated pipe is disabled."
> > > which we took to mean that having the interrupt masked but enabled is
> > > fine.
> > 
> > I'm aware of this, but I think the problem is that the resources
> > drained by the constant enable+disable+enable+disable outweigh the
> > resources saved by turning off vblanks.
> 
> Well the CPU is awake anyway doing the get/put, so not sure why a a few
> extra register accesses there would have such a huge impact.
> 
> > Not sure if there's an extra
> > reason why BSpec asks us to immediately disable vblanks though...
> > 
> > So, to summarize, the main (only?) reason is the BSpec comment?
> 
> The point is not to wake up due to interrupts when we don't need them.
> 
> > 
> > 
> > > But maybe we'd actually have to frob IER too to avoid wasting
> > > power somehow?
> > 
> > With the interrupt masked on IMR, I don't think IER matters.
> 
> I'm not sure anyone actually verified that.

Well, I just tried this on HSW. And on that one IER didn't make a
difference to pc7 residency (~70%) at least. This was on an actually
idle system ;)

> 
> > 
> > >
> > >> I also wish there was some easy way to check how this patch (or its
> > >> revert) affect a bunch of different workloads...
> > >>
> > >> (Also CCing Chris for insightful comments on performance)
> > >
> > > IIRC Chris had a patch to not disable the interrupt immediately when
> > > the refcount drops to 0, but instead delay the disable until the next
> > > interrupt actually happens. But I guess it didn't go in? Probably I
> > > should have reviewed it but didn't. It sounds like a decent idea to
> > > me in any case for the active use case.
> > >
> > >>
> > >> Thanks,
> > >> Paulo
> > >>
> > >> >
> > >> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >> > ---
> > >> >  drivers/gpu/drm/i915/i915_irq.c | 8 ++++++++
> > >> >  1 file changed, 8 insertions(+)
> > >> >
> > >> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > >> > index 28bae6e..4b2e7af 100644
> > >> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > >> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > >> > @@ -4364,6 +4364,14 @@ void intel_irq_init(struct drm_device *dev)
> > >> >                 dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
> > >> >         }
> > >> >
> > >> > +       /*
> > >> > +        * Opt out of the vblank disable timer on everything except gen2.
> > >> > +        * Gen2 doesn't have a hardware frame counter and so depends on
> > >> > +        * vblank interrupts to produce sane vblank seuquence numbers.
> > >> > +        */
> > >> > +       if (!IS_GEN2(dev))
> > >> > +               dev->vblank_disable_immediate = true;
> > >> > +
> > >> >         if (drm_core_check_feature(dev, DRIVER_MODESET)) {
> > >> >                 dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
> > >> >                 dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
> > >> > --
> > >> > 1.8.5.5
> > >> >
> > >> > _______________________________________________
> > >> > Intel-gfx mailing list
> > >> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > >> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > >>
> > >>
> > >>
> > >> --
> > >> Paulo Zanoni
> > >
> > > --
> > > Ville Syrjälä
> > > Intel OTC
> > 
> > 
> > 
> > -- 
> > Paulo Zanoni
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux