On Thu, Nov 19, 2015 at 01:51:37PM +0000, Chris Wilson wrote:
> If we probe the connector status from sysfs and find it has a new value,
> we should synthesize the associated hotplug uevent. This keeps our
> behaviour consistent and informs userspace of any override or change
> imposed by the user.
>
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_sysfs.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
> index 615b7e667320..382b82f871bc 100644
> --- a/drivers/gpu/drm/drm_sysfs.c
> +++ b/drivers/gpu/drm/drm_sysfs.c
> @@ -208,6 +208,8 @@ static ssize_t status_store(struct device *device,
> if (dev->mode_config.poll_enabled)
> schedule_delayed_work(&dev->mode_config.output_poll_work,
> 0);
> +
> + drm_kms_helper_hotplug_event(dev);
I don't like leaking these all over the place. What about the (untested)
idea below?
-Daniel
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index a214a4a93b03..b7bdf12c54a5 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -147,6 +147,8 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
list_for_each_entry(mode, &connector->modes, head)
mode->status = MODE_UNVERIFIED;
+ old_status = connector->status;
+
if (connector->force) {
if (connector->force == DRM_FORCE_ON ||
connector->force == DRM_FORCE_ON_DIGITAL)
@@ -156,33 +158,31 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
if (connector->funcs->force)
connector->funcs->force(connector);
} else {
- old_status = connector->status;
-
connector->status = connector->funcs->detect(connector, true);
+ }
+
+ /*
+ * Normally either the driver's hpd code or the poll loop should
+ * pick up any changes and fire the hotplug event. But if
+ * userspace sneaks in a probe, we might miss a change. Hence
+ * check here, and if anything changed start the hotplug code.
+ */
+ if (old_status != connector->status) {
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+ connector->base.id,
+ connector->name,
+ old_status, connector->status);
/*
- * Normally either the driver's hpd code or the poll loop should
- * pick up any changes and fire the hotplug event. But if
- * userspace sneaks in a probe, we might miss a change. Hence
- * check here, and if anything changed start the hotplug code.
+ * The hotplug event code might call into the fb
+ * helpers, and so expects that we do not hold any
+ * locks. Fire up the poll struct instead, it will
+ * disable itself again.
*/
- if (old_status != connector->status) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
- connector->base.id,
- connector->name,
- old_status, connector->status);
-
- /*
- * The hotplug event code might call into the fb
- * helpers, and so expects that we do not hold any
- * locks. Fire up the poll struct instead, it will
- * disable itself again.
- */
- dev->mode_config.delayed_event = true;
- if (dev->mode_config.poll_enabled)
- schedule_delayed_work(&dev->mode_config.output_poll_work,
- 0);
- }
+ dev->mode_config.delayed_event = true;
+ if (dev->mode_config.poll_enabled)
+ schedule_delayed_work(&dev->mode_config.output_poll_work,
+ 0);
}
/* Re-enable polling in case the global poll config changed. */
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 9ac4ffa6cce3..8cc69f0b64bc 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -167,39 +167,28 @@ static ssize_t status_store(struct device *device,
{
struct drm_connector *connector = to_drm_connector(device);
struct drm_device *dev = connector->dev;
- enum drm_connector_status old_status;
+ enum drm_connector_force old_force;
int ret;
ret = mutex_lock_interruptible(&dev->mode_config.mutex);
if (ret)
return ret;
- old_status = connector->status;
+ old_force = connector->force;
- if (sysfs_streq(buf, "detect")) {
+ if (sysfs_streq(buf, "detect"))
connector->force = 0;
- connector->status = connector->funcs->detect(connector, true);
- } else if (sysfs_streq(buf, "on")) {
+ else if (sysfs_streq(buf, "on"))
connector->force = DRM_FORCE_ON;
- } else if (sysfs_streq(buf, "on-digital")) {
+ else if (sysfs_streq(buf, "on-digital"))
connector->force = DRM_FORCE_ON_DIGITAL;
- } else if (sysfs_streq(buf, "off")) {
+ else if (sysfs_streq(buf, "off"))
connector->force = DRM_FORCE_OFF;
- } else
+ else
ret = -EINVAL;
- if (ret == 0 && connector->force) {
- if (connector->force == DRM_FORCE_ON ||
- connector->force == DRM_FORCE_ON_DIGITAL)
- connector->status = connector_status_connected;
- else
- connector->status = connector_status_disconnected;
- if (connector->funcs->force)
- connector->funcs->force(connector);
- }
-
- if (old_status != connector->status) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+ if (old_force != connector->force) {
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force updated from %d to %d\n",
connector->base.id,
connector->name,
old_status, connector->status);
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
