+dt list On 11/18/2015 4:49 PM, Archit Taneja wrote:
Update DT bindings for mdp. We now have a more uniform and future-proof set of compatible strings. MDP5 bindings were missing. Add those and update details on the clock-names properties. Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> --- .../devicetree/bindings/display/msm/mdp.txt | 26 +++++++++++++++------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt index 0833eda..a214f6c 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp.txt @@ -2,18 +2,28 @@ Qualcomm adreno/snapdragon display controller Required properties: - compatible: - * "qcom,mdp" - mdp4 + * "qcom,mdp4" - mdp4 + * "qcom,mdp5" - mdp5 - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the display controller. - connectors: array of phandles for output device(s) - clocks: device clocks See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "src_clk" - * "hdmi_clk" - * "mpd_clk" +- clock-names: the following clocks are required. + For MDP4: + * "core_clk" + * "iface_clk" + * "lut_clk" + * "src_clk" + * "hdmi_clk" + * "mdp_clk" + For MDP5: + * "bus_clk" + * "iface_clk" + * "core_clk_src" + * "core_clk" + * "lut_clk" (some MDP5 versions may not need this) + * "vsync_clk" Optional properties: - gpus: phandle for gpu device @@ -26,7 +36,7 @@ Example: ... mdp: qcom,mdp@5100000 { - compatible = "qcom,mdp"; + compatible = "qcom,mdp4"; reg = <0x05100000 0xf0000>; interrupts = <GIC_SPI 75 0>; connectors = <&hdmi>;
-- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel