|
Hi Heiko, On 11/12/2015 07:23 AM, Heiko Stuebner
wrote:
Hi Yakir, Am Mittwoch, 28. Oktober 2015, 16:30:33 schrieb Yakir Yang:Add phy driver for the Rockchip DisplayPort PHY module. This is required to get DisplayPort working in Rockchip SoCs. Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>a general thing I have been pondering, we should probably move the dp-phy under the GRF. Similar to the new power-domains being a full child of the PMU, the dp-phy is a full child-device of the GRF. That would include: - making the GRF a simply-mfd (just adding that property) - moving the dts node under it - making the driver get its regmap from its parent (just like drivers/soc/rockchip/pm_domains.c does) The usbphy is another example of that, and I think I'll be moving it below the grf as well. Sounds great, pretty cool to collect those scattered "GRF" driver, if you want me do some rebase on your changes, please note me :) - Yakir Heiko--- Changes in v8: - Fix the mixed spacers on macro definitions. (Heiko) - Remove the unnecessary empty line after clk_prepare_enable. (Heiko) Changes in v7: - Simply the commit message. (Kishon) - Symmetrical enable/disbale the phy clock and power. (Kishon) Changes in v6: None Changes in v5: - Remove "reg" DT property, cause driver could poweron/poweroff phy via the exist "grf" syscon already. And rename the example DT node from "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) - Add deivce_node at the front of driver, update phy_ops type from "static struct" to "static const struct". And correct the input paramters of devm_phy_create() interfaces. (Heiko) Changes in v4: - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) Changes in v3: - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) Changes in v2: None drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-rockchip-dp.c | 155 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 163 insertions(+) create mode 100644 drivers/phy/phy-rockchip-dp.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 7eb5859d..7355819 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB help Enable this to support the Rockchip USB 2.0 PHY. +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 075db1a..b1700cd 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c new file mode 100644 index 0000000..c82c22f --- /dev/null +++ b/drivers/phy/phy-rockchip-dp.c @@ -0,0 +1,155 @@ +/* + * Rockchip DP PHY driver + * + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd. + * Author: Yakir Yang <ykk@@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> + +#define GRF_SOC_CON12 0x0274 + +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(4) +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) + +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21) +#define GRF_EDP_PHY_SIDDQ_ON 0 +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) + +struct rockchip_dp_phy { + struct device *dev; + struct regmap *grf; + struct clk *phy_24m; +}; + +static int rockchip_set_phy_state(struct phy *phy, bool enable) +{ + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); + int ret; + + if (enable) { + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_ON); + if (ret < 0) { + dev_err(dp->dev, "Can't enable PHY power %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(dp->phy_24m); + } else { + clk_disable_unprepare(dp->phy_24m); + + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_OFF); + } + + return ret; +} + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + return rockchip_set_phy_state(phy, true); +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + return rockchip_set_phy_state(phy, false); +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct rockchip_dp_phy *dp; + struct resource *res; + struct phy *phy; + int ret; + + if (!np) + return -ENODEV; + + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); + if (IS_ERR(dp)) + return -ENOMEM; + + dp->dev = dev; + + dp->phy_24m = devm_clk_get(dev, "24m"); + if (IS_ERR(dp->phy_24m)) { + dev_err(dev, "cannot get clock 24m\n"); + return PTR_ERR(dp->phy_24m); + } + + ret = clk_set_rate(dp->phy_24m, 24000000); + if (ret < 0) { + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret); + return ret; + } + + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(dp->grf)) { + dev_err(dev, "rk3288-dp needs rockchip,grf property\n"); + return PTR_ERR(dp->grf); + } + + ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER | + GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK); + if (ret != 0) { + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret); + return ret; + } + + phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, dp); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_dp_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-dp-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids); + +static struct platform_driver rockchip_dp_phy_driver = { + .probe = rockchip_dp_phy_probe, + .driver = { + .name = "rockchip-dp-phy", + .of_match_table = rockchip_dp_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_dp_phy_driver); + +MODULE_AUTHOR("Yakir Yang <ykk@xxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Rockchip DP PHY driver"); +MODULE_LICENSE("GPL v2"); |
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
