On 10/31/2015 12:42 AM, Rob Herring wrote:
On Wed, Oct 28, 2015 at 3:31 AM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
Add dt binding documentation for rockchip display port PHY.
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Thanks,
- Yakir
---
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 0000000..00902cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip Soc Seroes Display Port PHY
+------------------------------------
+
+Required properties:
+- compatible : should be one of the following supported values:
+ - "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
