On Mon, Oct 19, 2015 at 01:25:37PM +0100, Russell King - ARM Linux wrote:
> On Mon, Oct 19, 2015 at 01:21:50PM +0100, Liviu Dudau wrote:
> > A lot of component based DRM drivers use a variant of the same code
> > as the probe function. They bind the crtc ports in the first iteration
> > and then scan through the child nodes and bind the encoders attached
> > to the remote endpoints. Factor the common code into a separate
> > function called drm_of_component_probe() in order to increase code
> > reuse.
> >
> > Cc: David Airlie <airlied@xxxxxxxx>
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> > ---
> > drivers/gpu/drm/drm_of.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++
> > include/drm/drm_of.h | 12 +++++++
> > 2 files changed, 104 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c
> > index be38840..cf16240 100644
> > --- a/drivers/gpu/drm/drm_of.c
> > +++ b/drivers/gpu/drm/drm_of.c
> > @@ -1,3 +1,4 @@
> > +#include <linux/component.h>
> > #include <linux/export.h>
> > #include <linux/list.h>
> > #include <linux/of_graph.h>
> > @@ -61,3 +62,94 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> > return possible_crtcs;
> > }
> > EXPORT_SYMBOL(drm_of_find_possible_crtcs);
> > +
> > +/**
> > + * drm_of_component_probe - Generic probe function for a component based master
> > + * @dev: master device containing the OF node
> > + * @compare_of: compare function used for matching components
> > + * @master_ops: component master ops to be used
> > + *
> > + * Parse the platform device OF node and bind all the components associated
> > + * with the master. Interface ports are added before the encoders in order to
> > + * satisfy their .bind requirements
> > + * See Documentation/devicetree/bindings/graph.txt for the bindings.
> > + *
> > + * Returns zero if successful, or one of the standard error codes if it fails.
> > + */
> > +int drm_of_component_probe(struct device *dev,
> > + int (*compare_of)(struct device *, void *),
> > + const struct component_master_ops *master_ops)
> > +{
> ...
> > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
> > + if (ret)
> > + return ret;
>
> Please don't move this into here, it's completely inappropriate. Just
> because something makes use of this does not mean they only support
> 32-bit DMA. Besides, this has nothing to do with whether or not it's
> OF-based or not.
Understood. My thinking process was that component-based drivers are all
OF-enabled (how else do you make use of the framework?) and 32-bit DMA is
present in 2 out of 3 drivers that are converted, so it looks to be common
enough that adding it to armada would not hurt. It was all done in the name of
collecting common code in a single function.
> > +
> > + return component_master_add_with_match(dev, master_ops, match);
> > +}
> > +EXPORT_SYMBOL(drm_of_component_probe);
> > diff --git a/include/drm/drm_of.h b/include/drm/drm_of.h
> > index 2441f71..7c0c05b 100644
> > --- a/include/drm/drm_of.h
> > +++ b/include/drm/drm_of.h
> > @@ -1,18 +1,30 @@
> > #ifndef __DRM_OF_H__
> > #define __DRM_OF_H__
> >
> > +struct component_master_ops;
> > +struct device;
> > struct drm_device;
> > struct device_node;
> >
> > #ifdef CONFIG_OF
> > extern uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> > struct device_node *port);
> > +extern int drm_of_component_probe(struct device *dev,
> > + int (*compare_of)(struct device *, void *),
> > + const struct component_master_ops *master_ops);
> > #else
> > static inline uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> > struct device_node *port)
> > {
> > return 0;
> > }
> > +
> > +static inline int drm_of_component_probe(struct device *dev,
> > + int (*compare_of)(struct device *, void *),
> > + const struct component_master_ops *master_ops)
>
> Some of these lines will fail checkpatch. It would be nice to avoid
> lines longer than 80 columns.
I'm torn between following the 80 columns rule, aligning parameters to the
opening brace, keeping the return value on the same line as the function name
and having this high res monitor that can make code more readable by going to
86 columns. :)
I will update the patch to trim down the line width, thanks for reviewing it!
Best regards,
Liviu
>
> --
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
