From: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Add documentation for DT properties supported by ps8640
DSI-eDP converter.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
---
.../devicetree/bindings/video/bridge/ps8640.txt | 48 ++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/ps8640.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/ps8640.txt b/Documentation/devicetree/bindings/video/bridge/ps8640.txt
new file mode 100644
index 0000000..450b5df
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/ps8640.txt
@@ -0,0 +1,48 @@
+ps8640-bridge bindings
+
+Required properties:
+ - compatible: "parade,ps8640"
+ - reg: first i2c address of the bridge
+ - power-gpios: OF device-tree gpio specification for power pin.
+ - reset-gpios: OF device-tree gpio specification for reset pin.
+ - mode-sel-gpios: OF device-tree gpio specification for mode-sel pin.
+ - ps8640-1v2-supply: OF device-tree regulator specification for 1v2.
+ - ps8640-3v3-supply: OF device-tree regulator specification for 3v3.
+
+Optional properties:
+ - video interfaces: Device node can contain video interface port
+ nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ edp-bridge@18 {
+ compatible = "parade,ps8640";
+ reg = <0x18>;
+ power-gpios = <&pio 116 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
+ mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
+ ps8640-1v2-supply = <&ps8640_fixed_1v2>;
+ ps8640-3v3-supply = <&mt6397_vgp2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
