[PATCH v6 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.

Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04

Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
  directly, but we can take those as hardware limite. For example, RK3288
  only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
  like "link-rate = 0x0a" "lane-count = 4". (Thierry)

Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8 ++++----
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++--
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 334181c..96afb67 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
 	/*
 	 * For DP rev.1.1, Maximum link rate of Main Link lanes
 	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+	 * For DP rev.1.2, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
 	 */
 	analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
 	*bandwidth = data;
@@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
 	analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
 
 	if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
-	    (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+	    (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+	    (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
 		dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
 			dp->link_train.link_rate);
 		dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
 	analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
 	analogix_dp_enable_enhanced_mode(dp, 1);
 
-	analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
-	analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
 	analogix_dp_init_video(dp);
 	ret = analogix_dp_config_video(dp);
 	if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 14d20be..9a90a18 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -21,8 +21,9 @@
 #define MAX_EQ_LOOP 5
 
 enum link_rate_type {
-	LINK_RATE_1_62GBPS = 0x06,
-	LINK_RATE_2_70GBPS = 0x0a
+	LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+	LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+	LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
 };
 
 enum link_lane_count_type {
-- 
1.9.1


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux