On 10/7/15, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > On Wed, Oct 07, 2015 at 10:29:22AM -0400, Nick Bowler wrote: >> On 10/7/15, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote: >> > On Tue, Oct 06, 2015 at 11:42:33AM -0400, Nick Bowler wrote: >> >> On 9/24/15, Nick Bowler <nbowler@xxxxxxxxxx> wrote: >> >> > Testing out 4.3-rc2, first thing I notice is that the VGA output is >> >> > not working. Specifically, the display is continuously powering on >> >> > and off -- at no point is any image visible on the screen (I am >> >> > expecting to see the console output). The display connected to the >> >> > HDMI output is working fine. >> [...] > Hmm. You said VGA has the problem, but HDMI does not. Was the problem > happening even when you have both displays enabled at the same time, or > just when VGA was enabled alone? When I boot with HDMI cable disconnected, there is no change in behaviour for the VGA output. > I've attached two potential patches that might help. Can you give a try > to just patch 1, and if that alone doesn't help then both patches > together? I will try. Cheers, Nick _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
