[RFC v3 1/7] dt-bindings: drm/mediatek: Add Mediatek display subsystem dts binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: CK Hu <ck.hu@xxxxxxxxxxxx>

Add device tree binding documentation for the display subsystem in
Mediatek MT8173 SoCs. The display function block nodes are grouped
under a display-subsystem node.

Signed-off-by: CK Hu <ck.hu@xxxxxxxxxxxx>
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
Changes since v2:
 - Grouped DISP function block nodes under the display-subsystem node
 - Added of-graph ports to binding documentation
 - Added MIPI TX binding
 - Added DPI binding
---
 .../bindings/drm/mediatek/mediatek,disp.txt        | 133 +++++++++++++++++++++
 .../bindings/drm/mediatek/mediatek,dpi.txt         |  41 +++++++
 .../bindings/drm/mediatek/mediatek,dsi.txt         |  53 ++++++++
 3 files changed, 227 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
 create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,dpi.txt
 create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt

diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
new file mode 100644
index 0000000..c065f27
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
@@ -0,0 +1,133 @@
+Mediatek display subsystem
+==========================
+
+The Mediatek display subsystem consists of various DISP function blocks in the
+MMSYS register space. The connections between them can be configured by output
+and input selectors in the MMSYS_CONFIG register space and register updates can
+be synchronized to video frame boundaries with help of a DISP_MUTEX function
+block.
+
+The display-subsystem node groups together all individual device nodes that
+comprise the DISP subsystem.
+
+Required properties:
+
+- compatible: "mediatek,<chip>-disp"
+- power-domains: a phandle to MMSYS power domain node.
+- mmsys-config: Should contain a phandle pointing to the MMSYS node.
+- disp-mutex: Should contain a phandle pointing to the DISP_MUTEX node.
+
+DISP function blocks
+====================
+
+A display stream starts at a source function block that reads pixel data from
+memory and ends with a sink function block that drives pixels on a display
+interface, or writes pixels back to memory. All DISP function blocks have
+their own register space, interrupt, and clock gate. The blocks that can
+access memory additionally have to list the IOMMU and local arbiter they are
+connected to.
+
+For a description of the display interface sink function blocks, see
+Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
+
+Required properties (all function blocks):
+- compatible: "mediatek,<chip>-disp-<function>", one of
+	"mediatek,<chip>-disp-ovl"   - overlay (4 layers, blending, csc)
+	"mediatek,<chip>-disp-rdma"  - read DMA / line buffer
+	"mediatek,<chip>-disp-wdma"  - write DMA
+	"mediatek,<chip>-disp-color" - color processor
+	"mediatek,<chip>-disp-aal"   - adaptive ambient light controller
+	"mediatek,<chip>-disp-gamma" - gamma correction
+	"mediatek,<chip>-disp-ufoe"  - data compression engine
+	"mediatek,<chip>-dsi"        - DSI controller, see mediatek,dsi.txt
+	"mediatek,<chip>-dpi"        - DPI controller, see mediatek,dpi.txt
+	"mediatek,<chip>-disp-mutex" - display mutex
+	"mediatek,<chip>-disp-od"    - overdrive
+- reg: Physical base address and length of the function block register space
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- compatible: "mediatek,<chip>-ddp"
+
+Required properties (DMA function blocks):
+- compatible: Should be one of
+	"mediatek,<chip>-disp-ovl"
+	"mediatek,<chip>-disp-rdma"
+- larb: Should contain a phandle pointing to the local arbiter device as defined
+  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+- iommus: required a iommu node
+
+Examples:
+
+display-subsystem@1400c000 {
+	compatible = "mediatek,mt8173-disp", "simple-bus";
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	mmsys-config = <&mmsys>;
+	disp-mutex = <&mutex>;
+
+	ovl0@1400c000 {
+		compatible = "mediatek,mt8173-disp-ovl";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL0>;
+		iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_OVL0>;
+	};
+
+	rdma0@1400e000 {
+		compatible = "mediatek,mt8173-disp-rdma";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+		iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_RDMA0>;
+	};
+
+	color0@14013000 {
+		compatible = "mediatek,mt8173-disp-color";
+		reg = <0 0x14013000 0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+	};
+
+	aal@14015000 {
+		compatible = "mediatek,mt8173-disp-aal";
+		reg = <0 0x14015000 0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_AAL>;
+	};
+
+	gamma@14016000 {
+		compatible = "mediatek,mt8173-disp-gamma";
+		reg = <0 0x14016000 0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+	};
+
+	ufoe@1401a000 {
+		compatible = "mediatek,mt8173-disp-ufoe";
+		reg = <0 0x1401a000 0 0x1000>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_UFOE>;
+	};
+
+	dsi0@1401b000 {
+		/* See mediatek,dsi.txt for details */
+	};
+
+	dpi0@1401d000 {
+		/* See mediatek,dpi.txt for details */
+	};
+
+	od@14023000 {
+		compatible = "mediatek,mt8173-disp-od";
+		reg = <0 0x14023000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_DISP_OD>;
+	};
+};
+
+mutex: mutex@14020000 {
+	compatible = "mediatek,mt8173-disp-mutex";
+	reg = <0 0x14020000 0 0x1000>;
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+};
diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dpi.txt
new file mode 100644
index 0000000..2093aa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dpi.txt
@@ -0,0 +1,41 @@
+Mediatek DPI Device
+===================
+
+The Mediatek DPI function block is a sink of the display subsystem and
+provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
+output bus.
+
+Required properties:
+- compatible: "mediatek,<chip>-dpi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "pixel", "engine", "pll", "sel", "div2", "div4",
+	       and "div8".
+- port: Output port node with endpoint definitions as described in
+  Documentation/devicetree/bindings/graph.txt. This port should be connected
+  to the input port of an attached HDMI or LVDS encoder chip.
+
+Example:
+
+dpi0: dpi@1401d000 {
+	compatible = "mediatek,mt8173-dpi";
+	reg = <0 0x1401d000 0 0x1000>;
+	interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+		 <&mmsys CLK_MM_DPI_ENGINE>,
+		 <&apmixedsys CLK_APMIXED_TVDPLL>,
+		 <&topckgen CLK_TOP_DPI0_SEL>,
+		 <&topckgen CLK_TOP_TVDPLL_D2>,
+		 <&topckgen CLK_TOP_TVDPLL_D4>,
+		 <&topckgen CLK_TOP_TVDPLL_D8>;
+	clock-names = "pixel", "engine", "pll",
+		      "sel", "div2", "div4", "div8";
+
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&hdmi0_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
new file mode 100644
index 0000000..afa7afb
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
@@ -0,0 +1,53 @@
+Mediatek DSI Device
+===================
+
+The Mediatek DSI function block is a sink of the display subsystem and can
+drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+channel output.
+
+Required properties:
+- compatible: "mediatek,<chip>-dsi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "engine" and "digital".
+- phys: phandle link to the MIPI D-PHY controller.
+- phy-names: must contain "dphy"
+- port: Output port node with endpoint definitions as described in
+  Documentation/devicetree/bindings/graph.txt. This port should be connected
+  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+MIPI TX Configuration Module
+============================
+
+The MIPI TX configuration module controls the MIPI D-PHY.
+
+Required properties:
+- compatible: "mediatek,<chip>-mipi-tx"
+- reg: Physical base address and length of the controller's registers
+- #phy-cells: must be <0>.
+
+Example:
+
+mipi_tx0: mipi-dphy@10215000 {
+	compatible = "mediatek,mt8173-mipi-tx";
+	reg = <0 0x10215000 0 0x1000>;
+	#phy-cells = <0>;
+};
+
+dsi0: dsi@1401b000 {
+	compatible = "mediatek,mt8173-dsi";
+	reg = <0 0x1401b000 0 0x1000>;
+	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>;
+	clock-names = "engine", "digital";
+	phys = <&mipi_tx0>;
+	phy-names = "dphy";
+
+	port {
+		dsi0_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
-- 
2.5.3

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux