On 09/25/15 18:50, Arnaud Pouliquen wrote:
Hello Jyri,
Yes using or not DRM bridge we should be able to have a common
implementation
Please find,my answer belows
BR,
Arnaud
On 09/25/2015 04:11 PM, Jyri Sarha wrote:
Despite my earlier comment this implementation and the related HW is
quite similar in all significant aspects to the patch set posted couple
of days ago [1] for Beaglebone-Black HDMI audio.
[1] http://permalink.gmane.org/gmane.linux.alsa.devel/144144
yes i trying to align my dev on it. to match with your development.
Aim for me is to reuse it and adapt it using a DRM bridge interface.
i hope to provide a V2 next week.
I have not yet gotten to bottom of drm-side audio bride part, but I am
working on it. Bellow is couple of early comments to the ASoC part.
Best regards,
Jyri
On 09/21/15 16:19, Arnaud Pouliquen wrote:
+
+static int st_hdmi_dai_probe(struct snd_soc_dai *dai)
+{
+ struct hdmi_drm_dai_data *priv;
+
+ dev_err(dai->dev, "%s: enter\n", __func__);
+ priv = devm_kzalloc(dai->dev, sizeof(*priv), GFP_KERNEL);
+
+ priv->bridge = of_drm_find_bridge(dai->dev->of_node);
+
+ dev_err(dai->dev, "%s: bridge %p\n", __func__, priv->bridge);
+
+ snd_soc_dai_set_drvdata(dai, priv);
+
The call above overwrites the private data pointer of the drivers that
registering the codec. This hardly works in general.
A separate platform driver - with this already merged patch [2] - that I
use with my patch-set solves this issue quite nicely.
[2] http://lists.freedesktop.org/archives/dri-devel/2015-May/083517.html
Yes same dev,(but no crash...?).i need to define sub node.
+ return 0;
+}here are several important callbacks missing here
+
+static const struct snd_soc_dai_ops hdmi_drm_codec_ops = {
+ .prepare = hdmi_drm_dai_prepare,
+ .trigger = hdmi_drm_dai_trigger,
+};
At least set_daifmt() and hw_params() callbacks should be defined before
this could be generally usable. HDMI encoders do not usually support too
many daifmts, but the driver should be able the check that the selected
format is supported. But as you said this not complete code yet.
I'm trying to match codec ops with following DRM audio bridge ops,
that is similar to the existing drm_bridge_funcs structure.
I am not yet too familiar with drm way of doing things. My code is
trying to follow the way how ALSA does things. I tried to survive with
as few callback as possible, but if you think more is needed I can add
those if there is a corresponding callback in ALSA.
struct drm_audio_bridge_funcs {
void (*disable)(struct drm_bridge *bridge);
There is no such thing in my HDMI codec. However, there is digital_mute
callback that is used by alsa before the streams are shut down to avoid
undesired pops and clicks.
void (*post_disable)(struct drm_bridge *bridge);
Post_disable should map more or less directly to audio_shutdown() in my
code.
void (*pre_enable)(struct drm_bridge *bridge);
audio_startup() and hw_params() should both be called at pre_enable()
phase.
void (*enable)(struct drm_bridge *bridge);
... or one could see hw_params() to map to enable. And there is
digital_mute which is toggled by ALSA at this phase.
int (*mode_set)(struct drm_bridge *bridge,
struct hdmi_audio_mode *mode);
Actually hw_params() does pretty much the same thing as set_mode(), but
it should be called after audio_startup() has been called.
uint8_t *(*mode_get)(struct drm_bridge *bridge); /*return eld*/
};
For this there is get_eld() in my HDMI codec code.
audio parameters should be part of struct hdmi_audio_mode that contains
audio configurations ( info frame,iec, format, clk...)
BTW, the HDMI codec is made in such a way that one can get by with only
hw_params() and audio_shutdown(). In such an implementation hw_params()
sets the HDMI encoder ready for receiving i2s or spdif from CPU DAI and
audio_shutdown() disables the audio stream.
Best regards,
Jyri
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
