On 09/18/2015 06:06 AM, Jyri Sarha wrote:
> From: Jean-Francois Moine <moinejf@xxxxxxx>
>
> Two kinds of ports may be declared in a DT graph of ports: video and audio.
> This patch accepts the port value from a video port as an alternative
> to the video-ports property.
> It also accepts audio ports in the case the transmitter is not used as
> a slave encoder.
> The new file include/sound/tda998x.h prepares to the definition of
> a tda998x CODEC.
>
> Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
> .../devicetree/bindings/drm/i2c/tda998x.txt | 51 ++++++++++++
> drivers/gpu/drm/i2c/tda998x_drv.c | 90 +++++++++++++++++++---
> include/sound/tda998x.h | 8 ++
> 3 files changed, 140 insertions(+), 9 deletions(-)
> create mode 100644 include/sound/tda998x.h
>
> diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> index e9e4bce..35f6a80 100644
> --- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> +++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> @@ -16,6 +16,35 @@ Optional properties:
>
> - video-ports: 24 bits value which defines how the video controller
> output is wired to the TDA998x input - default: <0x230145>
> + This property is not used when ports are defined.
> +
> +Optional nodes:
> +
> + - port: up to three ports.
> + The ports are defined according to [1].
> +
> + Video port.
> + There may be only one video port.
> + This one must contain the following property:
> +
> + - port-type: must be "rgb"
Why do you need this if there is no other choice? The port number should
define which one is video.
> +
> + and may contain the optional property:
> +
> + - reg: 24 bits value which defines how the video controller
> + output is wired to the TDA998x input (video pins)
> + When absent, the default value is <0x230145>.
I'm failing to decode how this value works. In any case, I would keep
this as a vendor specific property rather than abusing reg.
> +
> + Audio ports.
> + There may be one or two audio ports.
> + These ones must contain the following properties:
> +
> + - port-type: must be "i2s" or "spdif"
> +
> + - reg: 8 bits value which defines how the audio controller
> + output is wired to the TDA998x input (audio pins)
reg is 32-bits.
> +
> +[1] Documentation/devicetree/bindings/graph.txt
>
> Example:
>
> @@ -26,4 +55,26 @@ Example:
> interrupts = <27 2>; /* falling edge */
> pinctrl-0 = <&pmx_camera>;
> pinctrl-names = "default";
> +
> + port@230145 {
> + port-type = "rgb";
> + reg = <0x230145>;
> + hdmi_0: endpoint {
> + remote-endpoint = <&lcd0_0>;
> + };
> + };
> + port@3 { /* AP1 = I2S */
Is 3 significant? What happened to 0-2?
> + port-type = "i2s";
> + reg = <0x03>;
> + tda998x_i2s: endpoint {
> + remote-endpoint = <&audio1_i2s>;
> + };
> + };
> + port@4 { /* AP2 = S/PDIF */
> + port-type = "spdif";
> + reg = <0x04>;
> + tda998x_spdif: endpoint {
> + remote-endpoint = <&audio1_spdif1>;
> + };
> + };
> };
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 424228b..0952eac 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -27,6 +27,7 @@
> #include <drm/drm_edid.h>
> #include <drm/drm_of.h>
> #include <drm/i2c/tda998x.h>
> +#include <sound/tda998x.h>
>
> #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
>
> @@ -47,6 +48,8 @@ struct tda998x_priv {
> wait_queue_head_t wq_edid;
> volatile int wq_edid_wait;
> struct drm_encoder *encoder;
> +
> + struct tda998x_audio audio;
> };
>
> #define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
> @@ -774,6 +777,8 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv,
> (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
>
> priv->params = *p;
> + priv->audio.port_types[0] = p->audio_format;
> + priv->audio.ports[0] = p->audio_cfg;
> }
>
> static void tda998x_encoder_dpms(struct tda998x_priv *priv, int mode)
> @@ -1230,9 +1235,57 @@ static struct drm_encoder_slave_funcs tda998x_encoder_slave_funcs = {
>
> /* I2C driver functions */
>
> +static int tda998x_parse_ports(struct tda998x_priv *priv,
> + struct device_node *np)
> +{
> + struct device_node *of_port;
> + const char *port_type;
> + int ret, audio_index, reg, afmt;
> +
> + audio_index = 0;
> + for_each_child_of_node(np, of_port) {
> + if (!of_port->name
> + || of_node_cmp(of_port->name, "port") != 0)
> + continue;
> + ret = of_property_read_string(of_port, "port-type",
> + &port_type);
> + if (ret < 0)
> + continue;
> + ret = of_property_read_u32(of_port, "reg", ®);
> + if (strcmp(port_type, "rgb") == 0) {
> + if (!ret) { /* video reg is optional */
> + priv->vip_cntrl_0 = reg >> 16;
> + priv->vip_cntrl_1 = reg >> 8;
> + priv->vip_cntrl_2 = reg;
> + }
> + continue;
> + }
> + if (strcmp(port_type, "i2s") == 0)
> + afmt = AFMT_I2S;
> + else if (strcmp(port_type, "spdif") == 0)
> + afmt = AFMT_SPDIF;
> + else
> + continue;
> + if (ret < 0) {
> + dev_err(&priv->hdmi->dev, "missing reg for %s\n",
> + port_type);
> + return ret;
> + }
> + if (audio_index >= ARRAY_SIZE(priv->audio.ports)) {
> + dev_err(&priv->hdmi->dev, "too many audio ports\n");
> + break;
> + }
> + priv->audio.ports[audio_index] = reg;
> + priv->audio.port_types[audio_index] = afmt;
> + audio_index++;
> + }
> + return 0;
> +}
> +
> static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
> {
> struct device_node *np = client->dev.of_node;
> + struct device_node *of_port;
> u32 video;
> int rev_lo, rev_hi, ret;
> unsigned short cec_addr;
> @@ -1337,15 +1390,34 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
> /* enable EDID read irq: */
> reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
>
> - if (!np)
> - return 0; /* non-DT */
> -
> - /* get the optional video properties */
> - ret = of_property_read_u32(np, "video-ports", &video);
> - if (ret == 0) {
> - priv->vip_cntrl_0 = video >> 16;
> - priv->vip_cntrl_1 = video >> 8;
> - priv->vip_cntrl_2 = video;
> + /* get the device tree parameters */
> + if (np) {
> + of_port = of_get_child_by_name(np, "port");
> + if (of_port) { /* graph of ports */
> + of_node_put(of_port);
> + ret = tda998x_parse_ports(priv, np);
> + if (ret < 0)
> + goto fail;
> +
> + /* initialize the default audio configuration */
> + if (priv->audio.ports[0]) {
> + priv->params.audio_cfg = priv->audio.ports[0];
> + priv->params.audio_format =
> + priv->audio.port_types[0];
> + priv->params.audio_clk_cfg =
> + priv->params.audio_format ==
> + AFMT_SPDIF ? 0 : 1;
> + }
> + } else {
> +
> + /* optional video properties */
> + ret = of_property_read_u32(np, "video-ports", &video);
> + if (ret == 0) {
> + priv->vip_cntrl_0 = video >> 16;
> + priv->vip_cntrl_1 = video >> 8;
> + priv->vip_cntrl_2 = video;
> + }
> + }
> }
>
> return 0;
> diff --git a/include/sound/tda998x.h b/include/sound/tda998x.h
> new file mode 100644
> index 0000000..bef1da7
> --- /dev/null
> +++ b/include/sound/tda998x.h
> @@ -0,0 +1,8 @@
> +#ifndef SND_TDA998X_H
> +#define SND_TDA998X_H
> +
> +struct tda998x_audio {
> + u8 ports[2]; /* AP value */
> + u8 port_types[2]; /* AFMT_xxx */
> +};
> +#endif
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
