Hi,
On 09/16/2015 02:04 PM, Xinwei Kong wrote:
hi architt
On 2015/9/16 2:11, Rob Herring wrote:
On 09/15/2015 04:37 AM, Xinwei Kong wrote:
This adds documentation of device tree bindings for the
Graphics Processing Unit of hi6220 SOC.
Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
Signed-off-by: Andy Green <andy.green@xxxxxxxxxx>
Signed-off-by: Jiwen Qi <qijiwen@xxxxxxxxxxxxx>
Signed-off-by: Yu Gong <gongyu@xxxxxxxxxxxxx>
---
.../devicetree/bindings/gpu/hisilicon,hi6220.txt | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt
diff --git a/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt
new file mode 100644
index 0000000..173ac63
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt
@@ -0,0 +1,69 @@
+ * Hisilicon hi6220 Graphics Processing Unit for HiKey board
+
+ ** display-subsystem: Master device for binding DRM sub-components
DRM is a Linuxism that doesn't belong in the binding.
+ This master device is parent node and it will be responsible to bind all
+ sub-components devices node.
Are these nodes a single block in the h/w? If not, you should describe
the connection of sub-nodes with of-graph instead.
+ - Required properties :
+ - compatible: "hisilicon,display-subsystem".
+ - #address-cells, #size-cells: Must be present if the device has sub-nodes.
+ - ranges: to allow probing of subdevices.
+ - dma-coherent: Present if dma operations are coherent.
+
+ ** ade: Graphic overlay, Graphic post-processing, display timing control.
+ This device is child node of display-subsystem
+ - Required properties :
+ - compatible: "hisilicon,hi6220-ade".
+ - reg: physical base address of the ADE register and length of memory
+ region.
+ - reg-names: Should contain the reg names "ade_base" and "media_base".
+ - interrupt: The interrupt number to the cpu. Defines the interrupt
+ by ADE.
+ - clocks: The clocks needed by the ADE module.
+ - clock-names: the name of the clocks.
+
+ ** dsi: support mipi dsi interface
+ This device is child node of display-subsystem
+ - Required properties :
+ - compatible: "hisilicon,hi6220-dsi".
+ - reg: physical base address of the DSI register and length of memory
+ region.
+ - clocks: The clocks needed by the DSI module.
+ - clock-names: the name of the clocks.
+ - encoder-slave: phandles to a 'encoder-slave' subnode which DSI connect
+ ADV7533 in order to support hdmi display.
What the ADV7533 binding looks like is still being discussed.
"encoder-slave" is certainly DRM specific and not how it should be done.
Most likely, this needs to use the of-graph ports.
I dont how to implement the encoder bridge stuff in upstream,
you think that I will how to handle this part?
You can use of-graph ports to link the dsi output with the adv7533
bridge.
An example of the binding looks like:
Documentation/devicetree/bindings/drm/msm/dsi.txt
The implementation of this on the dsi host side of drm/msm
can be found in dsi_host_parse_dt, in:
drivers/gpu/drm/msm/dsi/dsi_host.c
You can get to know more about of-graph parsing here:
Documentation/devicetree/bindings/graph.txt
I'd started going through the drm/hisil patches. I'll
share more comments there.
Thanks,
Archit
Thank you
xinwei
Also, the ADV7533 connection is specific to HiKey. This binding should
just generically describe how any bridge or panel is connected.
Rob
.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
