Hi Heiko, 在 2015/9/1 22:24, Heiko Stuebner 写道:
Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:Rockchip have three clocks for dp controller, we leave pclk_edp to analogix_dp driver control, and keep the sclk_edp_24m and sclk_edp in platform driver. Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> --- Changes in v4: - Remove some deprecated DT properties in rockchip dp document. Changes in v3: - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform driver which name to "pclk". - Take Heiko suggest, add devicetree binding document. - Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote point to get panel node. - Add the new function point analogix_dp_platdata.get_modes init. Changes in v2: - Take Heiko suggest, get panel node with remote-endpoint method, and create devicetree binding for driver. - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m", leave those clock to rockchip dp phy driver. .../bindings/video/analogix_dp-rockchip.txt | 74 ++++ drivers/gpu/drm/rockchip/Kconfig | 9 + drivers/gpu/drm/rockchip/Makefile | 1 + drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 389 +++++++++++++++++++++ 4 files changed, 473 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c diff --git a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file mode 100644 index 0000000..502483e --- /dev/null +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt @@ -0,0 +1,74 @@ +Rockchip RK3288 specific extensions to the Analogix Display Port +================================ + +Required properties: +- compatible: "rockchip,rk3288-edp"; + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + of memory mapped region. + +- clock-names: from common clock binding: + Required elements: "dp" "pclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + +- reset-names: Must include the name "dp" + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: contain a port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt +- phys (required) +- phy-names (required) +- hpd-gpios (optional) +--------------------------------------------------------------------------- ---- + +Example: + dp-controller: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&dp_phy>; + phy-names = "dp"; + + rockchip,grf = <&grf>; + resets = <&cru 111>; + reset-names = "dp"; + + status = "disabled"; + + ports { + edp_in: port { + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp> + }; + }; + }; + }; +just a nit right now, because "git am" mentioned it: git am \[PATCH\ v4\ 08_16\]\ drm_rockchip_dp_add\ rockchip\ platform\ dp\ driver.mbox [...]/linux-rockchip/.git/rebase-apply/patch:108: new blank line at EOF. + meaning you're adding an empty line at the end :-)
Oh, thanks, I have saw this too when I apply this on linux-next branch, but I haven't see the log very careful at that time, and ".git/rebase-apply/patch" just empty, so I just go ahead and forget to fix this one. Thanks for your remind, - Yakir
Heiko
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
