Re: [PATCH v3 06/14] Documentation: drm/bridge: add document for analogix_dp

[Yakir Yang <ykk@xxxxxxxxxxxxxx>]

Hi Krzysztof,

在 08/23/2015 07:43 PM, Krzysztof Kozlowski 写道:
> 2015-08-24 8:23 GMT+09:00 Rob Herring <robherring2@xxxxxxxxx>:
> > On Wed, Aug 19, 2015 at 9:50 AM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
> > > Analogix dp driver is split from exynos dp driver, so we just
> > > make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
> > >
> > > Beside update some exynos dtsi file with the latest change
> > > according to the devicetree binding documents.
> > You can't just change the exynos bindings and break compatibility. Is
> > there some agreement with exynos folks to do this?
> No, there is no agreement. This wasn't even sent to Exynos maintainers.

Sorry about this one, actually I have add Exynos maintainers in version 
1 & version 2,
but lose some maintainers in version 3, I would fix it in bellow versions.

> Additionally the patchset did not look interesting to me because of
> misleading subject - Documentation instead of "ARM: dts:".
>
> Yakir, please:
> 1. Provide backward compatibility. Mark old properties as deprecated
> but still support them.

Do you mean that I should keep the old properties declare in exynos-dp.txt,
but just mark them as deprecated flag. Let me show same examples, make
me understand your suggest rightly.

1. "samsung,ycbcr-coeff" is abandoned in latest analogix-dp driver, 
absolutely
    I should not carry this to analogix-dp.txt document. But I should 
keep this in
    exynos-dp.txt document, and mark them with an little "deprecated" flag.

[Documentation/devicetree/bindings/video/exynos_dp.txt]
Required properties for dp-controller:
   [...]
    -samsung,ycbcr-coeff (DEPRECATED):
        YCbCr co-efficients for input video.
            COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1

Is it right ?

> 2. Separate all DTS changes to a separate patch, unless bisectability
> would be hurt. Anyway you should prepare it in a such way that
> separation would be possible without breaking bisectability.

So I should separate this patch into two parts, one is name "Document:",
the other is "ARM: dts: ".

Honestly, I don't understand what the "bisectability" means in this case.

> 3. Use proper subject for the patch changing DTS. This is not
> documentation change!

Hmm... when I separate this patch into two parts, I though I can keep
"Documentation" proper subject in this patch, and the other is the "ARM: 
dts"
proper subject. Am I right ?

> 4. Please use script get_maintainers to obtain list of valid
> maintainers and CC-them with at least cover letter and patches
> requiring their attention.

Yeah, thanks.


Thanks a lot,
- Yakir

> Best regards,
> Krzysztof
>
>
> > > Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> > > ---
> > > Changes in v3:
> > > - Take Heiko suggest, add devicetree binding documents.
> > > - Take Thierry Reding suggest, remove sync pol & colorimetry properies
> > >    from the new analogix dp driver devicetree binding.
> > > - Update the exist exynos dtsi file with the latest DP DT properies.
> > >
> > > Changes in v2: None
> > >
> > >   .../devicetree/bindings/drm/bridge/analogix_dp.txt | 70 ++++++++++++++++++++++
> > >   .../devicetree/bindings/video/exynos_dp.txt        | 50 ++++++----------
> > >   arch/arm/boot/dts/exynos5250-arndale.dts           | 10 ++--
> > >   arch/arm/boot/dts/exynos5250-smdk5250.dts          | 10 ++--
> > >   arch/arm/boot/dts/exynos5250-snow.dts              | 12 ++--
> > >   arch/arm/boot/dts/exynos5250-spring.dts            | 12 ++--
> > >   arch/arm/boot/dts/exynos5420-peach-pit.dts         | 12 ++--
> > >   arch/arm/boot/dts/exynos5420-smdk5420.dts          | 10 ++--
> > >   arch/arm/boot/dts/exynos5800-peach-pi.dts          | 12 ++--
> > >   9 files changed, 119 insertions(+), 79 deletions(-)
> > >   create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> > > new file mode 100644
> > > index 0000000..6127018
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> > > @@ -0,0 +1,70 @@
> > > +Analogix Display Port bridge bindings
> > > +
> > > +Required properties for dp-controller:
> > > +       -compatible:
> > > +               platform specific such as:
> > > +                * "samsung,exynos5-dp"
> > > +                * "rockchip,rk3288-dp"
> > > +       -reg:
> > > +               physical base address of the controller and length
> > > +               of memory mapped region.
> > > +       -interrupts:
> > > +               interrupt combiner values.
> > > +       -clocks:
> > > +               from common clock binding: handle to dp clock.
> > > +       -clock-names:
> > > +               from common clock binding: Shall be "dp".
> > > +       -interrupt-parent:
> > > +               phandle to Interrupt combiner node.
> > > +       -phys:
> > > +               from general PHY binding: the phandle for the PHY device.
> > > +       -phy-names:
> > > +               from general PHY binding: Should be "dp".
> > > +       -analogix,color-space:
> > > +               input video data format.
> > > +                       COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
> > > +       -analogix,color-depth:
> > > +               number of bits per colour component.
> > > +                       COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
> > This seems pretty generic. Just use 6, 8, 10, or 12 for values. And
> > drop the vendor prefix.
> >
> > > +       -analogix,link-rate:
> > > +               max link rate supported by the eDP controller.
> > > +                       LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A,
> > > +                       LINK_RATE_5_40GBPS = 0x14
> > Same here. I'd rather see something like "link-rate-mbps" and use the
> > actual rate.
> >
> > > +       -analogix,lane-count:
> > > +               max number of lanes supported by the eDP contoller.
> > > +                       LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
> > And drop the vendor prefix here.
> >
> > > +       -port@[X]: SoC specific port nodes with endpoint definitions as defined
> > > +               in Documentation/devicetree/bindings/media/video-interfaces.txt,
> > > +               please refer to the SoC specific binding document:
> > > +               * Documentation/devicetree/bindings/video/exynos_dp.txt
> > > +               * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> > > +
> > > +Optional properties for dp-controller:
> > > +       -analogix,hpd-gpio:
> > > +               Hotplug detect GPIO.
> > > +                       Indicates which GPIO should be used for hotplug
> > > +                       detection
> > We should align with "hpd-gpios" used by HDMI connector binding. Or do
> > we need a DP connector binding that this should be defined in?
> > Probably so.
> >
> > The DRM related bindings are such a cluster f*ck with everyone picking
> > their own way to do things. Just grep hpd in bindings for starters.
> > That is just the tip.
> >
> > > +       -video interfaces: Device node can contain video interface port
> > > +                           nodes according to [1].
> > Isn't this the same as ports above? How are they optional? 0 ports
> > would be pretty useless.
> >
> > > +
> > > +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> > > +-------------------------------------------------------------------------------
> > > +
> > > +Example:
> > > +
> > > +       dp-controller {
> > > +               compatible = "samsung,exynos5-dp";
> > > +               reg = <0x145b0000 0x10000>;
> > > +               interrupts = <10 3>;
> > > +               interrupt-parent = <&combiner>;
> > > +               clocks = <&clock 342>;
> > > +               clock-names = "dp";
> > > +
> > > +               phys = <&dp_phy>;
> > > +               phy-names = "dp";
> > > +
> > > +               analogix,color-space = <0>;
> > > +               analogix,color-depth = <1>;
> > > +               analogix,link-rate = <0x0a>;
> > > +               analogix,lane-count = <4>;
> > > +       };
> > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > > index 7a3a9cd..177506f 100644
> > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > > @@ -31,28 +31,10 @@ Required properties for dp-controller:
> > >                  from general PHY binding: the phandle for the PHY device.
> > >          -phy-names:
> > >                  from general PHY binding: Should be "dp".
> > > -       -samsung,color-space:
> > > -               input video data format.
> > > -                       COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
> > > -       -samsung,dynamic-range:
> > > -               dynamic range for input video data.
> > > -                       VESA = 0, CEA = 1
> > > -       -samsung,ycbcr-coeff:
> > > -               YCbCr co-efficients for input video.
> > > -                       COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
> > > -       -samsung,color-depth:
> > > -               number of bits per colour component.
> > > -                       COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
> > > -       -samsung,link-rate:
> > > -               link rate supported by the panel.
> > > -                       LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
> > > -       -samsung,lane-count:
> > > -               number of lanes supported by the panel.
> > > -                       LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
> > > -       - display-timings: timings for the connected panel as described by
> > > -               Documentation/devicetree/bindings/video/display-timing.txt
> > >
> > >   Optional properties for dp-controller:
> > > +       - display-timings: timings for the connected panel as described by
> > > +               Documentation/devicetree/bindings/video/display-timing.txt
> > >          -interlaced:
> > >                  interlace scan mode.
> > >                          Progressive if defined, Interlaced if not defined
> > > @@ -62,14 +44,18 @@ Optional properties for dp-controller:
> > >          -hsync-active-high:
> > >                  HSYNC polarity configuration.
> > >                          High if defined, Low if not defined
> > > -       -samsung,hpd-gpio:
> > > -               Hotplug detect GPIO.
> > > -                       Indicates which GPIO should be used for hotplug
> > > -                       detection
> > > -       -video interfaces: Device node can contain video interface port
> > > -                           nodes according to [1].
> > >
> > > -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> > > +For the below properties, please refer to Analogix DP binding document:
> > > + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> > > +       -phys (required)
> > > +       -phy-names (required)
> > > +       -analogix,color-space (required)
> > > +       -analogix,color-depth (required)
> > > +       -analogix,link-rate (required)
> > > +       -analogix,lane-count (required)
> > > +       -analogix,hpd-gpio (optional)
> > > +       -video interfaces (optional)
> > > +-------------------------------------------------------------------------------
> > >
> > >   Example:
> > >
> > > @@ -88,12 +74,10 @@ SOC specific portion:
> > >
> > >   Board Specific portion:
> > >          dp-controller {
> > > -               samsung,color-space = <0>;
> > > -               samsung,dynamic-range = <0>;
> > > -               samsung,ycbcr-coeff = <0>;
> > > -               samsung,color-depth = <1>;
> > > -               samsung,link-rate = <0x0a>;
> > > -               samsung,lane-count = <4>;
> > > +               analogix,color-space = <0>;
> > > +               analogix,color-depth = <1>;
> > > +               analogix,link-rate = <0x0a>;
> > > +               analogix,lane-count = <4>;
> > >
> > >                  display-timings {
> > >                          native-mode = <&lcd_timing>;
> > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> > > index 7e728a1..e48798d 100644
> > > --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> > > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> > > @@ -119,12 +119,10 @@
> > >
> > >   &dp {
> > >          status = "okay";
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <4>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <4>;
> > >   };
> > >
> > >   &fimd {
> > > diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> > > index 4fe186d..b8c6b8b 100644
> > > --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> > > +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> > > @@ -75,12 +75,10 @@
> > >   };
> > >
> > >   &dp {
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <4>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <4>;
> > >
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd>;
> > > diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> > > index b7f4122..9ce2b89 100644
> > > --- a/arch/arm/boot/dts/exynos5250-snow.dts
> > > +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> > > @@ -239,13 +239,11 @@
> > >          status = "okay";
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd>;
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <2>;
> > > -       samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <2>;
> > > +       analogix,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
> > >
> > >          ports {
> > >                  port@0 {
> > > diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
> > > index d03f9b8..9288ae6 100644
> > > --- a/arch/arm/boot/dts/exynos5250-spring.dts
> > > +++ b/arch/arm/boot/dts/exynos5250-spring.dts
> > > @@ -69,13 +69,11 @@
> > >          status = "okay";
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd_gpio>;
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <1>;
> > > -       samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <1>;
> > > +       analogix,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
> > >   };
> > >
> > >   &ehci {
> > > diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> > > index 8f4d76c..695a380 100644
> > > --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> > > +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> > > @@ -147,13 +147,11 @@
> > >          status = "okay";
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd_gpio>;
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x06>;
> > > -       samsung,lane-count = <2>;
> > > -       samsung,hpd-gpio = <&gpx2 6 0>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x06>;
> > > +       analogix,lane-count = <2>;
> > > +       analogix,hpd-gpio = <&gpx2 6 0>;
> > >
> > >          ports {
> > >                  port@0 {
> > > diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> > > index 98871f9..fd46714 100644
> > > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> > > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> > > @@ -91,12 +91,10 @@
> > >   &dp {
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd>;
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <4>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <4>;
> > >          status = "okay";
> > >   };
> > >
> > > diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> > > index 7d5b386..54b4c63 100644
> > > --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> > > +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> > > @@ -141,13 +141,11 @@
> > >          status = "okay";
> > >          pinctrl-names = "default";
> > >          pinctrl-0 = <&dp_hpd_gpio>;
> > > -       samsung,color-space = <0>;
> > > -       samsung,dynamic-range = <0>;
> > > -       samsung,ycbcr-coeff = <0>;
> > > -       samsung,color-depth = <1>;
> > > -       samsung,link-rate = <0x0a>;
> > > -       samsung,lane-count = <2>;
> > > -       samsung,hpd-gpio = <&gpx2 6 0>;
> > > +       analogix,color-space = <0>;
> > > +       analogix,color-depth = <1>;
> > > +       analogix,link-rate = <0x0a>;
> > > +       analogix,lane-count = <2>;
> > > +       analogix,hpd-gpio = <&gpx2 6 0>;
> > >          panel = <&panel>;
> > >   };
> > >
> > > --
> > > 1.9.1
> > >
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel