On Tue, Aug 25, 2015 at 10:29:39AM +0100, Russell King - ARM Linux wrote: > On Tue, Aug 25, 2015 at 11:12:48AM +0200, Thierry Reding wrote: > > On Mon, Aug 24, 2015 at 09:48:27AM -0500, Rob Herring wrote: > > > It goes beyond bindings IMO. The use of the component framework or not > > > has been at the whim of driver writers as well. It is either used or > > > private APIs are created. I'm using components and my need for it > > > boils down to passing the struct drm_device pointer to the encoder. > > > Other components like panels and bridges have different ways to attach > > > to the DRM driver. > > > > I certainly support unification, but it needs to be reasonable. There > > are cases where a different structure for the binding work better than > > another and I think this always needs to be evaluated on a case by case > > basis. > > It can't be a case-by-case basis. > > The TDA998x encoder/connector is going to be component only. This is > a generic chip, which can be attached to the output of any parallel > RGB+sync+clock bus. In other words, it could appear anywhere. > > Are you really saying that we need to support multiple schemes of > attaching the driver to DRM? That's totally insane IMHO. No, what I'm saying is that we should have a single scheme, but one that doesn't put any restrictions on what kind of DT binding you use or how your driver is architected. > The problem with the drm_encoder_slave stuff is that you can't sanely > attach of-nodes to the drm-created i2c device. Yes, you can parse > them from the DT file as a sub-node of the upper device, but that > then goes against the principle of the I2C bindings, which is to > list the I2C devices as a child below the I2C adapter node. If you > try and put the DT node there, then the OF code will create the I2C > device for you, and the drm_encoder_slave stuff won't have the > control it needs to communicate through the wrapped i2c_driver > stuff. > > So, tda998x is going component-only, as that's the _only_ sane solution > for it. Has anyone ever considered turning it into a DRM bridge driver? I had always envisioned component/master to be primarily useful to glue together various SoC components to form one componentized device. Now if tda998x is an I2C slave it is external to the SoC (auxiliary), so in my opinion much better off as a bridge driver. Bridge drivers don't come with any of the disadvantages that the drm_encoder_slave stuff has. They are regular drivers that are probed via their parent busses (I2C, platform, SPI, ...) and hook into DRM via an abstract interface. The DT aspect is taken care of automatically because they get instantiated by their parent bus like any other device. > Now, what happens when some other DRM driver wants to use the tda998x > driver, and its bindings are not compatible with the component helpers? > They're pretty much stuck up the creek without a paddle. I'm sure that will be very helpful response for whoever's going to end up having to deal with that situation. > Case by case doesn't work unless you're talking about truely isolated > hardware where no one shares anything. There are two different things here. The inter-driver interface, which, in my opinion, it makes a lot of sense to standardize. Like I mentioned above I think it unwise to make this interface depend upon a framework or the firmware description such as DT in order to avoid unnecessary restrictions. The second, orthogonal, issue, is the DT bindings. Those I think should absolutely be designed case by case and select whatever most accurately describes the hardware. Thierry
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
