Re: [PATCH v3 05/14] drm: bridge/analogix_dp: fix link_rate & lane_count bug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jingoo,

On 08/20/2015 02:22 AM, Jingoo Han wrote:
On 2015. 8. 19., at PM 11:50, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
link_rate and lane_count already configed in analogix_dp_set_link_train(),
s/configed/configured

Also, the commit name such as "fix ... bug" is not good.
How about following?

drm: bridge/analogix_dp: remove duplicate configuration of link rate and link count

Thanks, done, it's more readable.

- Yakir
Best regards,
Jingoo Han

so we don't need to config those repeatly after training finished, just
remove them out.

Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v3:
- Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
  the DT property value directly, but we can take those as hardware limite.
  For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
  so DT property would like "link-rate = 0x0a" "lane-count = 4".

Changes in v2: None

drivers/gpu/drm/bridge/analogix_dp_core.c | 16 ++++++++--------
drivers/gpu/drm/bridge/analogix_dp_core.h |  9 +++++----
2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
index 480cc13..1778e0a 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
@@ -635,6 +635,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
    /*
     * For DP rev.1.1, Maximum link rate of Main Link lanes
     * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+     * For DP rev.1.2, Maximum link rate of Main Link lanes
+     * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
     */
    analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
    *bandwidth = data;
@@ -668,7 +670,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
    analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);

    if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
-        (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+        (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+        (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
        dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
            dp->link_train.link_rate);
        dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -901,8 +904,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
        return;
    }

-    ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-                     dp->video_info->link_rate);
+    ret = analogix_dp_set_link_train(dp, dp->video_info->max_lane_count,
+                     dp->video_info->max_link_rate);
    if (ret) {
        dev_err(dp->dev, "unable to do link train\n");
        return;
@@ -912,9 +915,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
    analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
    analogix_dp_enable_enhanced_mode(dp, 1);

-    analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
-    analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
    analogix_dp_init_video(dp);
    ret = analogix_dp_config_video(dp);
    if (ret)
@@ -1198,13 +1198,13 @@ static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
    }

    if (of_property_read_u32(dp_node, "analogix,link-rate",
-                 &dp_video_config->link_rate)) {
+                 &dp_video_config->max_link_rate)) {
        dev_err(dev, "failed to get link-rate\n");
        return ERR_PTR(-EINVAL);
    }

    if (of_property_read_u32(dp_node, "analogix,lane-count",
-                 &dp_video_config->lane_count)) {
+                 &dp_video_config->max_lane_count)) {
        dev_err(dev, "failed to get lane-count\n");
        return ERR_PTR(-EINVAL);
    }
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
index 2cefde9..941b34f 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
@@ -21,8 +21,9 @@
#define MAX_EQ_LOOP 5

enum link_rate_type {
-    LINK_RATE_1_62GBPS = 0x06,
-    LINK_RATE_2_70GBPS = 0x0a
+    LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+    LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+    LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
};

enum link_lane_count_type {
@@ -128,8 +129,8 @@ struct video_info {
    enum color_coefficient ycbcr_coeff;
    enum color_depth color_depth;

-    enum link_rate_type link_rate;
-    enum link_lane_count_type lane_count;
+    enum link_rate_type       max_link_rate;
+    enum link_lane_count_type max_lane_count;
};

struct link_train {
--
1.9.1






_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux