This is the start of a full VC4 driver. Right now this just supports
configuring the display using a pre-existing video mode (because
changing the pixel clock isn't available yet, and doesn't work when it
is). However, this is enough for fbcon and bringing up X using
xf86-video-modesetting.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
ordering instead of using the .load hook. Structure registration
more like tegra's, but still using the typical "component" code.
Drop no-op hooks for atomic_begin and mode_fixup() now that
they're optional. Drop sentinel in Makefile. Fix minor style
nits I noticed on another reread.
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/vc4/Kconfig | 13 +
drivers/gpu/drm/vc4/Makefile | 17 +
drivers/gpu/drm/vc4/vc4_bo.c | 52 ++++
drivers/gpu/drm/vc4/vc4_crtc.c | 565 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/vc4/vc4_debugfs.c | 38 +++
drivers/gpu/drm/vc4/vc4_drv.c | 271 ++++++++++++++++
drivers/gpu/drm/vc4/vc4_drv.h | 120 ++++++++
drivers/gpu/drm/vc4/vc4_hdmi.c | 633 ++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/vc4/vc4_hvs.c | 161 ++++++++++
drivers/gpu/drm/vc4/vc4_kms.c | 84 +++++
drivers/gpu/drm/vc4/vc4_plane.c | 320 +++++++++++++++++++
drivers/gpu/drm/vc4/vc4_regs.h | 562 +++++++++++++++++++++++++++++++++
14 files changed, 2839 insertions(+)
create mode 100644 drivers/gpu/drm/vc4/Kconfig
create mode 100644 drivers/gpu/drm/vc4/Makefile
create mode 100644 drivers/gpu/drm/vc4/vc4_bo.c
create mode 100644 drivers/gpu/drm/vc4/vc4_crtc.c
create mode 100644 drivers/gpu/drm/vc4/vc4_debugfs.c
create mode 100644 drivers/gpu/drm/vc4/vc4_drv.c
create mode 100644 drivers/gpu/drm/vc4/vc4_drv.h
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hvs.c
create mode 100644 drivers/gpu/drm/vc4/vc4_kms.c
create mode 100644 drivers/gpu/drm/vc4/vc4_plane.c
create mode 100644 drivers/gpu/drm/vc4/vc4_regs.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 06ae500..19bb0db 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -260,3 +260,5 @@ source "drivers/gpu/drm/sti/Kconfig"
source "drivers/gpu/drm/amd/amdkfd/Kconfig"
source "drivers/gpu/drm/imx/Kconfig"
+
+source "drivers/gpu/drm/vc4/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 8858510..283ed8e 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_DRM_MGA) += mga/
obj-$(CONFIG_DRM_I810) += i810/
obj-$(CONFIG_DRM_I915) += i915/
obj-$(CONFIG_DRM_MGAG200) += mgag200/
+obj-$(CONFIG_DRM_VC4) += vc4/
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
new file mode 100644
index 0000000..e810ef7
--- /dev/null
+++ b/drivers/gpu/drm/vc4/Kconfig
@@ -0,0 +1,13 @@
+config DRM_VC4
+ tristate "Broadcom VC4 Graphics"
+ depends on ARCH_BCM2835
+ depends on DRM
+ select DRM_KMS_HELPER
+ select DRM_KMS_CMA_HELPER
+ help
+ Choose this option if you have a system that has a Broadcom
+ VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.
+
+ This driver requires that "avoid_warnings=2" be present in
+ the config.txt for the firmware, to keep it from smashing
+ our display setup.
diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
new file mode 100644
index 0000000..32b4f9c
--- /dev/null
+++ b/drivers/gpu/drm/vc4/Makefile
@@ -0,0 +1,17 @@
+ccflags-y := -Iinclude/drm
+
+# Please keep these build lists sorted!
+
+# core driver code
+vc4-y := \
+ vc4_bo.o \
+ vc4_crtc.o \
+ vc4_drv.o \
+ vc4_kms.o \
+ vc4_hdmi.o \
+ vc4_hvs.o \
+ vc4_plane.o
+
+vc4-$(CONFIG_DEBUG_FS) += vc4_debugfs.o
+
+obj-$(CONFIG_DRM_VC4) += vc4.o
diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c
new file mode 100644
index 0000000..ab9f510
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_bo.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* DOC: VC4 GEM BO management support.
+ *
+ * The VC4 GPU architecture (both scanout and rendering) has direct
+ * access to system memory with no MMU in between. To support it, we
+ * use the GEM CMA helper functions to allocate contiguous ranges of
+ * physical memory for our BOs.
+ */
+
+#include "vc4_drv.h"
+
+struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t size)
+{
+ struct drm_gem_cma_object *cma_obj;
+
+ cma_obj = drm_gem_cma_create(dev, size);
+ if (IS_ERR(cma_obj))
+ return NULL;
+ else
+ return to_vc4_bo(&cma_obj->base);
+}
+
+int vc4_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+ struct vc4_bo *bo = NULL;
+ int ret;
+
+ if (args->pitch < min_pitch)
+ args->pitch = min_pitch;
+
+ if (args->size < args->pitch * args->height)
+ args->size = args->pitch * args->height;
+
+ bo = vc4_bo_create(dev, roundup(args->size, PAGE_SIZE));
+ if (!bo)
+ return -ENOMEM;
+
+ ret = drm_gem_handle_create(file_priv, &bo->base.base, &args->handle);
+ drm_gem_object_unreference_unlocked(&bo->base.base);
+
+ return ret;
+}
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
new file mode 100644
index 0000000..2c70faf
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -0,0 +1,565 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * DOC: VC4 CRTC module
+ *
+ * In VC4, the Pixel Valve is what most closely corresponds to the
+ * DRM's concept of a CRTC. The PV generates video timings from the
+ * pixel clock and its configuration.
+ *
+ * However, the DRM CRTC also collects the configuration of all the
+ * DRM planes attached to it. As a result, this file also manages
+ * setup of the VC4 HVS's display elements on the CRTC.
+ */
+
+#include "drm_atomic_helper.h"
+#include "drm_crtc_helper.h"
+#include "linux/clk.h"
+#include "linux/component.h"
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+#define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
+#define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
+
+#define CRTC_REG(reg) { reg, #reg }
+static const struct {
+ u32 reg;
+ const char *name;
+} crtc_regs[] = {
+ CRTC_REG(PV_CONTROL),
+ CRTC_REG(PV_V_CONTROL),
+ CRTC_REG(PV_VSYNCD),
+ CRTC_REG(PV_HORZA),
+ CRTC_REG(PV_HORZB),
+ CRTC_REG(PV_VERTA),
+ CRTC_REG(PV_VERTB),
+ CRTC_REG(PV_VERTA_EVEN),
+ CRTC_REG(PV_VERTB_EVEN),
+ CRTC_REG(PV_INTEN),
+ CRTC_REG(PV_INTSTAT),
+ CRTC_REG(PV_STAT),
+ CRTC_REG(PV_HACT_ACT),
+};
+
+static void vc4_crtc_dump_regs(struct vc4_crtc *vc4_crtc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
+ DRM_INFO("0x%04x (%s): 0x%08x\n",
+ crtc_regs[i].reg, crtc_regs[i].name,
+ CRTC_READ(crtc_regs[i].reg));
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ int crtc_index = (uintptr_t)node->info_ent->data;
+ struct drm_crtc *crtc;
+ struct vc4_crtc *vc4_crtc;
+ int i;
+
+ i = 0;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ if (i == crtc_index)
+ break;
+ i++;
+ }
+ if (!crtc)
+ return 0;
+ vc4_crtc = to_vc4_crtc(crtc);
+
+ for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ crtc_regs[i].name, crtc_regs[i].reg,
+ CRTC_READ(crtc_regs[i].reg));
+ }
+
+ return 0;
+}
+#endif
+
+static void vc4_crtc_destroy(struct drm_crtc *crtc)
+{
+ drm_crtc_cleanup(crtc);
+}
+
+static u32 vc4_get_fifo_full_level(u32 format)
+{
+ static const u32 fifo_len_bytes = 64;
+ static const u32 hvs_latency_pix = 6;
+
+ switch (format) {
+ case PV_CONTROL_FORMAT_DSIV_16:
+ case PV_CONTROL_FORMAT_DSIC_16:
+ return fifo_len_bytes - 2 * hvs_latency_pix;
+ case PV_CONTROL_FORMAT_DSIV_18:
+ return fifo_len_bytes - 14;
+ case PV_CONTROL_FORMAT_24:
+ case PV_CONTROL_FORMAT_DSIV_24:
+ default:
+ return fifo_len_bytes - 3 * hvs_latency_pix;
+ }
+}
+
+static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_crtc_state *state = crtc->state;
+ struct drm_display_mode *mode = &state->adjusted_mode;
+ u32 vactive = (mode->vdisplay >>
+ ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? 1 : 0));
+ u32 format = PV_CONTROL_FORMAT_24;
+ bool debug_dump_regs = false;
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc));
+ vc4_crtc_dump_regs(vc4_crtc);
+ }
+
+ /* This is where we would set the pixel clock. */
+
+ /* Reset the PV fifo. */
+ CRTC_WRITE(PV_CONTROL, 0);
+ CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
+ CRTC_WRITE(PV_CONTROL, 0);
+
+ CRTC_WRITE(PV_HORZA,
+ VC4_SET_FIELD(mode->htotal - mode->hsync_end,
+ PV_HORZA_HBP) |
+ VC4_SET_FIELD(mode->hsync_end - mode->hsync_start,
+ PV_HORZA_HSYNC));
+ CRTC_WRITE(PV_HORZB,
+ VC4_SET_FIELD(mode->hsync_start - mode->hdisplay,
+ PV_HORZB_HFP) |
+ VC4_SET_FIELD(mode->hdisplay, PV_HORZB_HACTIVE));
+
+ CRTC_WRITE(PV_VERTA,
+ VC4_SET_FIELD(mode->vtotal - mode->vsync_end,
+ PV_VERTA_VBP) |
+ VC4_SET_FIELD(mode->vsync_end - mode->vsync_start,
+ PV_VERTA_VSYNC));
+ CRTC_WRITE(PV_VERTB,
+ VC4_SET_FIELD(mode->vsync_start - mode->vdisplay,
+ PV_VERTB_VFP) |
+ VC4_SET_FIELD(vactive, PV_VERTB_VACTIVE));
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ /* Write PV_VERTA_EVEN/VERTB_EVEN */
+ }
+
+ CRTC_WRITE(PV_HACT_ACT, mode->hdisplay);
+
+ CRTC_WRITE(PV_V_CONTROL,
+ PV_VCONTROL_CONTINUOUS);
+
+ CRTC_WRITE(PV_CONTROL,
+ VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
+ VC4_SET_FIELD(vc4_get_fifo_full_level(format),
+ PV_CONTROL_FIFO_LEVEL) |
+ PV_CONTROL_CLR_AT_START |
+ PV_CONTROL_TRIGGER_UNDERFLOW |
+ PV_CONTROL_WAIT_HSTART |
+ VC4_SET_FIELD(PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI,
+ PV_CONTROL_CLK_SELECT) |
+ PV_CONTROL_FIFO_CLR |
+ PV_CONTROL_EN);
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
+ vc4_crtc_dump_regs(vc4_crtc);
+ }
+}
+
+static void require_hvs_enabled(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL) & SCALER_DISPCTRL_ENABLE) !=
+ SCALER_DISPCTRL_ENABLE);
+}
+
+static void vc4_crtc_disable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+ require_hvs_enabled(dev);
+
+ CRTC_WRITE(PV_V_CONTROL,
+ CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
+ while (CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN)
+ cpu_relax();
+
+ /* Without a wait here, we end up with a black screen. */
+ msleep(30);
+
+ if (HVS_READ(SCALER_DISPCTRLX(vc4_crtc->channel)) &
+ SCALER_DISPCTRLX_ENABLE) {
+ HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel),
+ SCALER_DISPCTRLX_RESET);
+
+ /* While the docs say that reset is self-clearing, it
+ * seems it doesn't actually.
+ */
+ HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), 0);
+ }
+
+ /* Once we leave, the scaler should be disabled and its fifo empty. */
+
+ WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(vc4_crtc->channel)) &
+ SCALER_DISPCTRLX_RESET);
+
+ WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel)),
+ SCALER_DISPSTATX_MODE) !=
+ SCALER_DISPSTATX_MODE_DISABLED);
+
+ WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel)) &
+ (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
+ SCALER_DISPSTATX_EMPTY);
+}
+
+static void vc4_crtc_enable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_crtc_state *state = crtc->state;
+ struct drm_display_mode *mode = &state->adjusted_mode;
+
+ require_hvs_enabled(dev);
+
+ /* Turn on the scaler, which will wait for vstart to start
+ * compositing.
+ */
+ HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel),
+ VC4_SET_FIELD(mode->hdisplay, SCALER_DISPCTRLX_WIDTH) |
+ VC4_SET_FIELD(mode->vdisplay, SCALER_DISPCTRLX_HEIGHT) |
+ SCALER_DISPCTRLX_ENABLE);
+
+ /* Turn on the pixel valve, which will emit the vstart signal. */
+ CRTC_WRITE(PV_V_CONTROL,
+ CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
+}
+
+static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_plane *plane;
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ u32 dlist_count = 0;
+
+ drm_atomic_crtc_state_for_each_plane(plane, state) {
+ struct drm_plane_state *plane_state =
+ state->state->plane_states[drm_plane_index(plane)];
+
+ /* plane might not have changed, in which case take
+ * current state:
+ */
+ if (!plane_state)
+ plane_state = plane->state;
+
+ dlist_count += vc4_plane_dlist_size(plane_state);
+ }
+
+ dlist_count++; /* Account for SCALER_CTL0_END. */
+
+ if (!vc4_crtc->dlist || dlist_count > vc4_crtc->dlist_size) {
+ vc4_crtc->dlist = ((u32 __iomem *)vc4->hvs->dlist +
+ HVS_BOOTLOADER_DLIST_END);
+ vc4_crtc->dlist_size = ((SCALER_DLIST_SIZE >> 2) -
+ HVS_BOOTLOADER_DLIST_END);
+
+ if (dlist_count > vc4_crtc->dlist_size) {
+ DRM_DEBUG_KMS("dlist too large for CRTC (%d > %d).\n",
+ dlist_count, vc4_crtc->dlist_size);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_plane *plane;
+ bool debug_dump_regs = false;
+ u32 __iomem *dlist_next = vc4_crtc->dlist;
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc));
+ vc4_hvs_dump_state(dev);
+ }
+
+ /* Copy all the active planes' dlist contents to the hardware dlist.
+ *
+ * XXX: If the new display list was large enough that it
+ * overlapped a currently-read display list, we need to do
+ * something like disable scanout before putting in the new
+ * list. For now, we're safe because we only have the two
+ * planes.
+ */
+ drm_atomic_crtc_for_each_plane(plane, crtc) {
+ dlist_next += vc4_plane_write_dlist(plane, dlist_next);
+ }
+
+ if (dlist_next == vc4_crtc->dlist) {
+ /* If no planes were enabled, use the SCALER_CTL0_END
+ * at the start of the display list memory (in the
+ * bootloader section). We'll rewrite that
+ * SCALER_CTL0_END, just in case, though.
+ */
+ writel(SCALER_CTL0_END, vc4->hvs->dlist);
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), 0);
+ } else {
+ writel(SCALER_CTL0_END, dlist_next);
+ dlist_next++;
+
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ (u32 *)vc4_crtc->dlist - (u32 *)vc4->hvs->dlist);
+
+ /* Make the next display list start after ours. */
+ vc4_crtc->dlist_size -= (dlist_next - vc4_crtc->dlist);
+ vc4_crtc->dlist = dlist_next;
+ }
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
+ vc4_hvs_dump_state(dev);
+ }
+
+ if (crtc->state->event) {
+ unsigned long flags;
+
+ crtc->state->event->pipe = drm_crtc_index(crtc);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ vc4_crtc->event = crtc->state->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ crtc->state->event = NULL;
+ }
+}
+
+int vc4_enable_vblank(struct drm_device *dev, int crtc_id)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+
+ CRTC_WRITE(PV_INTEN, PV_INT_VFP_START);
+
+ return 0;
+}
+
+void vc4_disable_vblank(struct drm_device *dev, int crtc_id)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+
+ CRTC_WRITE(PV_INTEN, 0);
+}
+
+static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
+{
+ struct drm_crtc *crtc = &vc4_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ if (vc4_crtc->event) {
+ drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
+ vc4_crtc->event = NULL;
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static irqreturn_t vc4_crtc_irq_handler(int irq, void *data)
+{
+ struct vc4_crtc *vc4_crtc = data;
+ u32 stat = CRTC_READ(PV_INTSTAT);
+ irqreturn_t ret = IRQ_NONE;
+
+ if (stat & PV_INT_VFP_START) {
+ CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+ drm_crtc_handle_vblank(&vc4_crtc->base);
+ vc4_crtc_handle_page_flip(vc4_crtc);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static const struct drm_crtc_funcs vc4_crtc_funcs = {
+ .set_config = drm_atomic_helper_set_config,
+ .destroy = vc4_crtc_destroy,
+ .page_flip = drm_atomic_helper_page_flip,
+ .set_property = NULL,
+ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */
+ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */
+ .reset = drm_atomic_helper_crtc_reset,
+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
+ .mode_set_nofb = vc4_crtc_mode_set_nofb,
+ .disable = vc4_crtc_disable,
+ .enable = vc4_crtc_enable,
+ .atomic_check = vc4_crtc_atomic_check,
+ .atomic_flush = vc4_crtc_atomic_flush,
+};
+
+/* Frees the page flip event when the DRM device is closed with the
+ * event still outstanding.
+ */
+void vc4_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+
+ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) {
+ vc4_crtc->event->base.destroy(&vc4_crtc->event->base);
+ drm_crtc_vblank_put(crtc);
+ vc4_crtc->event = NULL;
+ }
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
+ struct vc4_crtc *vc4_crtc;
+ struct drm_crtc *crtc;
+ struct drm_plane *primary_plane, *cursor_plane;
+ int ret;
+
+ /* For now, we create just the primary and the legacy cursor
+ * planes. We should be able to stack more planes on easily,
+ * but to do that we would need to compute the bandwidth
+ * requirement of the plane configuration, and reject ones
+ * that will take too much.
+ */
+ primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY);
+ if (!primary_plane) {
+ dev_err(dev, "failed to construct primary plane\n");
+ ret = PTR_ERR(primary_plane);
+ goto fail;
+ }
+
+ cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
+ if (!cursor_plane) {
+ dev_err(dev, "failed to construct cursor plane\n");
+ ret = PTR_ERR(cursor_plane);
+ goto fail;
+ }
+
+ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL);
+ if (!vc4_crtc)
+ return -ENOMEM;
+ crtc = &vc4_crtc->base;
+
+ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0);
+ if (IS_ERR(vc4_crtc->regs))
+ return PTR_ERR(vc4_crtc->regs);
+
+ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane,
+ &vc4_crtc_funcs);
+ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
+ primary_plane->crtc = crtc;
+ cursor_plane->crtc = crtc;
+ vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc;
+
+ /* Until we have full scanout setup to route things through to
+ * encoders, line things up like the firmware did.
+ */
+ switch (drm_crtc_index(crtc)) {
+ case 0:
+ vc4_crtc->channel = 0;
+ break;
+ case 1:
+ vc4_crtc->channel = 2;
+ break;
+ default:
+ case 2:
+ vc4_crtc->channel = 1;
+ break;
+ }
+
+ CRTC_WRITE(PV_INTEN, 0);
+ CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+ vc4_crtc_irq_handler, 0, "vc4 crtc", vc4_crtc);
+
+ platform_set_drvdata(pdev, vc4_crtc);
+
+ return 0;
+
+fail:
+ return ret;
+}
+
+static void vc4_crtc_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev);
+
+ vc4_crtc_destroy(&vc4_crtc->base);
+
+ CRTC_WRITE(PV_INTEN, 0);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static const struct component_ops vc4_crtc_ops = {
+ .bind = vc4_crtc_bind,
+ .unbind = vc4_crtc_unbind,
+};
+
+static int vc4_crtc_dev_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &vc4_crtc_ops);
+}
+
+static int vc4_crtc_dev_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &vc4_crtc_ops);
+ return 0;
+}
+
+static const struct of_device_id vc4_crtc_dt_match[] = {
+ { .compatible = "brcm,vc4-pixelvalve" },
+ {}
+};
+
+struct platform_driver vc4_crtc_driver = {
+ .probe = vc4_crtc_dev_probe,
+ .remove = vc4_crtc_dev_remove,
+ .driver = {
+ .name = "vc4_crtc",
+ .of_match_table = vc4_crtc_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/vc4/vc4_debugfs.c b/drivers/gpu/drm/vc4/vc4_debugfs.c
new file mode 100644
index 0000000..c557039
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_debugfs.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright © 2014 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/circ_buf.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <drm/drmP.h>
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+static const struct drm_info_list vc4_debugfs_list[] = {
+ {"hdmi_regs", vc4_hdmi_debugfs_regs, 0},
+ {"hvs_regs", vc4_hvs_debugfs_regs, 0},
+ {"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0},
+ {"crtc1_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)1},
+ {"crtc2_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)2},
+};
+#define VC4_DEBUGFS_ENTRIES ARRAY_SIZE(vc4_debugfs_list)
+
+int
+vc4_debugfs_init(struct drm_minor *minor)
+{
+ return drm_debugfs_create_files(vc4_debugfs_list, VC4_DEBUGFS_ENTRIES,
+ minor->debugfs_root, minor);
+}
+
+void
+vc4_debugfs_cleanup(struct drm_minor *minor)
+{
+ drm_debugfs_remove_files(vc4_debugfs_list, VC4_DEBUGFS_ENTRIES, minor);
+}
diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
new file mode 100644
index 0000000..d30aefa
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom
+ * Copyright (C) 2013 Red Hat
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+#define DRIVER_NAME "vc4"
+#define DRIVER_DESC "Broadcom VC4 graphics"
+#define DRIVER_DATE "20140616"
+#define DRIVER_MAJOR 0
+#define DRIVER_MINOR 0
+#define DRIVER_PATCHLEVEL 0
+
+/* Helper function for mapping the regs on a platform device. */
+void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index)
+{
+ struct resource *res;
+ void __iomem *map;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, index);
+ map = devm_ioremap_resource(&dev->dev, res);
+ if (IS_ERR(map)) {
+ DRM_ERROR("Failed to map registers: %ld\n", PTR_ERR(map));
+ return map;
+ }
+
+ return map;
+}
+
+static void vc4_drm_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct drm_crtc *crtc;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+ vc4_cancel_page_flip(crtc, file);
+}
+
+static const struct file_operations vc4_drm_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+ .mmap = drm_gem_cma_mmap,
+ .poll = drm_poll,
+ .read = drm_read,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .llseek = noop_llseek,
+};
+
+static const struct drm_ioctl_desc vc4_drm_ioctls[] = {
+};
+
+static struct drm_driver vc4_drm_driver = {
+ .driver_features = (DRIVER_MODESET |
+ DRIVER_ATOMIC |
+ DRIVER_GEM |
+ DRIVER_PRIME),
+ .preclose = vc4_drm_preclose,
+
+ .enable_vblank = vc4_enable_vblank,
+ .disable_vblank = vc4_disable_vblank,
+ .get_vblank_counter = drm_vblank_count,
+
+#if defined(CONFIG_DEBUG_FS)
+ .debugfs_init = vc4_debugfs_init,
+ .debugfs_cleanup = vc4_debugfs_cleanup,
+#endif
+
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+ .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_vmap = drm_gem_cma_prime_vmap,
+ .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+ .gem_prime_mmap = drm_gem_cma_prime_mmap,
+
+ .dumb_create = vc4_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+
+ .ioctls = vc4_drm_ioctls,
+ .num_ioctls = ARRAY_SIZE(vc4_drm_ioctls),
+ .fops = &vc4_drm_fops,
+
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .patchlevel = DRIVER_PATCHLEVEL,
+};
+
+static int vc4_drm_bind(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm;
+ struct vc4_dev *vc4;
+ int ret = 0;
+
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ vc4 = devm_kzalloc(dev, sizeof(*vc4), GFP_KERNEL);
+ if (!vc4)
+ return -ENOMEM;
+
+ drm = drm_dev_alloc(&vc4_drm_driver, dev);
+ if (!drm)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, drm);
+ vc4->dev = drm;
+ drm->dev_private = vc4;
+
+ drm_dev_set_unique(drm, dev_name(dev));
+
+ drm_mode_config_init(drm);
+ if (ret)
+ goto unref;
+
+ ret = component_bind_all(dev, drm);
+ if (ret)
+ goto unref;
+
+ ret = drm_dev_register(drm, 0);
+ if (ret < 0)
+ goto unbind_all;
+
+ vc4_kms_load(drm);
+
+ return 0;
+unbind_all:
+ component_unbind_all(dev, drm);
+unref:
+ drm_dev_unref(drm);
+ return ret;
+
+ return 0;
+}
+
+static void vc4_drm_unbind(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = platform_get_drvdata(pdev);
+
+ drm_mode_config_cleanup(drm);
+
+ drm_put_dev(drm);
+}
+
+static const struct component_master_ops vc4_drm_ops = {
+ .bind = vc4_drm_bind,
+ .unbind = vc4_drm_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+static int add_components(struct device *dev, struct component_match **matchptr,
+ const char *name)
+{
+ struct device_node *np = dev->of_node;
+ unsigned i;
+
+ for (i = 0; ; i++) {
+ struct device_node *node;
+
+ node = of_parse_phandle(np, name, i);
+ if (!node)
+ break;
+
+ component_match_add(dev, matchptr, compare_of, node);
+ }
+
+ return 0;
+}
+
+static int vc4_platform_drm_probe(struct platform_device *pdev)
+{
+ struct component_match *match = NULL;
+ struct device *dev = &pdev->dev;
+
+ add_components(dev, &match, "crtcs");
+ add_components(dev, &match, "encoders");
+ add_components(dev, &match, "hvss");
+
+ return component_master_add_with_match(dev, &vc4_drm_ops, match);
+}
+
+static int vc4_platform_drm_remove(struct platform_device *pdev)
+{
+ component_master_del(&pdev->dev, &vc4_drm_ops);
+
+ return 0;
+}
+
+static const struct of_device_id vc4_of_match[] = {
+ { .compatible = "brcm,vc4", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, vc4_of_match);
+
+static struct platform_driver vc4_platform_driver = {
+ .probe = vc4_platform_drm_probe,
+ .remove = vc4_platform_drm_remove,
+ .driver = {
+ .name = "vc4-drm",
+ .owner = THIS_MODULE,
+ .of_match_table = vc4_of_match,
+ },
+};
+
+static struct platform_driver *component_drivers[] = {
+ &vc4_hdmi_driver,
+ &vc4_crtc_driver,
+ &vc4_hvs_driver,
+};
+
+static int __init vc4_drm_register(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(component_drivers); i++) {
+ int ret = platform_driver_register(component_drivers[i]);
+ if (ret) {
+ while (--i >= 0)
+ platform_driver_unregister(component_drivers[i]);
+ return ret;
+ }
+ }
+ return platform_driver_register(&vc4_platform_driver);
+}
+
+static void __exit vc4_drm_unregister(void)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(component_drivers) - 1; i >= 0; i--)
+ platform_driver_unregister(component_drivers[i]);
+
+ platform_driver_unregister(&vc4_platform_driver);
+}
+
+module_init(vc4_drm_register);
+module_exit(vc4_drm_unregister);
+
+MODULE_ALIAS("platform:vc4-drm");
+MODULE_DESCRIPTION("Broadcom VC4 DRM Driver");
+MODULE_AUTHOR("Eric Anholt <eric@xxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
new file mode 100644
index 0000000..282ce0b
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "drmP.h"
+#include "drm_gem_cma_helper.h"
+
+struct vc4_dev {
+ struct drm_device *dev;
+
+ struct vc4_hdmi *hdmi;
+ struct vc4_hvs *hvs;
+ struct vc4_crtc *crtc[3];
+};
+
+static inline struct vc4_dev *
+to_vc4_dev(struct drm_device *dev)
+{
+ return (struct vc4_dev *)dev->dev_private;
+}
+
+struct vc4_bo {
+ struct drm_gem_cma_object base;
+};
+
+static inline struct vc4_bo *
+to_vc4_bo(struct drm_gem_object *bo)
+{
+ return (struct vc4_bo *)bo;
+}
+
+struct vc4_hvs {
+ struct platform_device *pdev;
+ void __iomem *regs;
+ void __iomem *dlist;
+};
+
+struct vc4_crtc {
+ struct drm_crtc base;
+ void __iomem *regs;
+
+ /* Which HVS channel we're using for our CRTC. */
+ int channel;
+
+ /* Pointer to the actual hardware display list memory for the
+ * crtc.
+ */
+ u32 __iomem *dlist;
+
+ u32 dlist_size; /* in dwords */
+
+ struct drm_pending_vblank_event *event;
+};
+
+static inline struct vc4_crtc *
+to_vc4_crtc(struct drm_crtc *crtc)
+{
+ return (struct vc4_crtc *)crtc;
+}
+
+struct vc4_plane {
+ struct drm_plane base;
+};
+
+static inline struct vc4_plane *
+to_vc4_plane(struct drm_plane *plane)
+{
+ return (struct vc4_plane *)plane;
+}
+
+#define HVS_READ(offset) readl(vc4->hvs->regs + offset)
+#define HVS_WRITE(offset, val) writel(val, vc4->hvs->regs + offset)
+
+/* vc4_bo.c */
+void vc4_free_object(struct drm_gem_object *gem_obj);
+struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t size);
+int vc4_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+struct dma_buf *vc4_prime_export(struct drm_device *dev,
+ struct drm_gem_object *obj, int flags);
+
+/* vc4_crtc.c */
+extern struct platform_driver vc4_crtc_driver;
+int vc4_enable_vblank(struct drm_device *dev, int crtc_id);
+void vc4_disable_vblank(struct drm_device *dev, int crtc_id);
+void vc4_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file);
+int vc4_crtc_debugfs_regs(struct seq_file *m, void *arg);
+
+/* vc4_debugfs.c */
+int vc4_debugfs_init(struct drm_minor *minor);
+void vc4_debugfs_cleanup(struct drm_minor *minor);
+
+/* vc4_drv.c */
+void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index);
+
+/* vc4_hdmi.c */
+extern struct platform_driver vc4_hdmi_driver;
+struct drm_encoder *vc4_hdmi_encoder_init(struct drm_device *dev);
+struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
+ struct drm_encoder *encoder);
+int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused);
+
+/* vc4_hvs.c */
+extern struct platform_driver vc4_hvs_driver;
+void vc4_hvs_dump_state(struct drm_device *dev);
+int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused);
+
+/* vc4_kms.c */
+int vc4_kms_load(struct drm_device *dev);
+
+/* vc4_plane.c */
+struct drm_plane *vc4_plane_init(struct drm_device *dev,
+ enum drm_plane_type type);
+u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist);
+u32 vc4_plane_dlist_size(struct drm_plane_state *state);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
new file mode 100644
index 0000000..cd3301b
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -0,0 +1,633 @@
+/*
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drm_atomic_helper.h"
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+#include "linux/clk.h"
+#include "linux/component.h"
+#include "linux/of_gpio.h"
+#include "linux/of_platform.h"
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+/* General HDMI hardware state. */
+struct vc4_hdmi {
+ struct platform_device *pdev;
+ struct i2c_adapter *ddc;
+ void __iomem *hdmicore_regs;
+ void __iomem *hd_regs;
+ int hpd_gpio;
+
+ /* Probed video mode at boot time, used to filter display
+ * modes to only allow equivalent ones (since we can't set the
+ * pixel clock yet).
+ */
+ struct drm_display_mode boot_mode;
+};
+#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+
+/* VC4 HDMI encoder KMS struct */
+struct vc4_hdmi_encoder {
+ struct drm_encoder base;
+ bool hdmi_monitor;
+};
+static inline struct vc4_hdmi_encoder *
+to_vc4_hdmi_encoder(struct drm_encoder *encoder)
+{
+ return container_of(encoder, struct vc4_hdmi_encoder, base);
+}
+
+/* VC4 HDMI connector KMS struct */
+struct vc4_hdmi_connector {
+ struct drm_connector base;
+
+ /* Since the connector is attached to just the one encoder,
+ * this is the reference to it so we can do the best_encoder()
+ * hook.
+ */
+ struct drm_encoder *encoder;
+};
+static inline struct vc4_hdmi_connector *
+to_vc4_hdmi_connector(struct drm_connector *connector)
+{
+ return container_of(connector, struct vc4_hdmi_connector, base);
+}
+
+#define HDMI_REG(reg) { reg, #reg }
+static const struct {
+ u32 reg;
+ const char *name;
+} hdmi_regs[] = {
+ HDMI_REG(VC4_HDMI_CORE_REV),
+ HDMI_REG(VC4_HDMI_SW_RESET_CONTROL),
+ HDMI_REG(VC4_HDMI_HOTPLUG_INT),
+ HDMI_REG(VC4_HDMI_HOTPLUG),
+ HDMI_REG(VC4_HDMI_HORZA),
+ HDMI_REG(VC4_HDMI_HORZB),
+ HDMI_REG(VC4_HDMI_FIFO_CTL),
+ HDMI_REG(VC4_HDMI_SCHEDULER_CONTROL),
+ HDMI_REG(VC4_HDMI_VERTA0),
+ HDMI_REG(VC4_HDMI_VERTA1),
+ HDMI_REG(VC4_HDMI_VERTB0),
+ HDMI_REG(VC4_HDMI_VERTB1),
+ HDMI_REG(VC4_HDMI_TX_PHY_RESET_CTL),
+};
+static const struct {
+ u32 reg;
+ const char *name;
+} hd_regs[] = {
+ HDMI_REG(VC4_HD_M_CTL),
+ HDMI_REG(VC4_HD_MAI_CTL),
+ HDMI_REG(VC4_HD_VID_CTL),
+ HDMI_REG(VC4_HD_CSC_CTL),
+ HDMI_REG(VC4_HD_FRAME_COUNT),
+};
+
+#ifdef CONFIG_DEBUG_FS
+int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hdmi_regs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ hdmi_regs[i].name, hdmi_regs[i].reg,
+ HDMI_READ(hdmi_regs[i].reg));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hd_regs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ hd_regs[i].name, hd_regs[i].reg,
+ HD_READ(hd_regs[i].reg));
+ }
+
+ return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void vc4_hdmi_dump_regs(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hdmi_regs); i++) {
+ DRM_INFO("0x%04x (%s): 0x%08x\n",
+ hdmi_regs[i].reg, hdmi_regs[i].name,
+ HDMI_READ(hdmi_regs[i].reg));
+ }
+ for (i = 0; i < ARRAY_SIZE(hd_regs); i++) {
+ DRM_INFO("0x%04x (%s): 0x%08x\n",
+ hd_regs[i].reg, hd_regs[i].name,
+ HD_READ(hd_regs[i].reg));
+ }
+}
+
+static enum drm_connector_status
+vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct drm_device *dev = connector->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ if (vc4->hdmi->hpd_gpio) {
+ if (gpio_get_value(vc4->hdmi->hpd_gpio))
+ return connector_status_connected;
+ else
+ return connector_status_disconnected;
+ }
+
+ if (HDMI_READ(VC4_HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED)
+ return connector_status_connected;
+ else
+ return connector_status_disconnected;
+}
+
+static void vc4_hdmi_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+ struct vc4_hdmi_connector *vc4_connector =
+ to_vc4_hdmi_connector(connector);
+ struct drm_encoder *encoder = vc4_connector->encoder;
+ struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+ struct drm_device *dev = connector->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ int ret = 0;
+ struct edid *edid;
+
+ edid = drm_get_edid(connector, vc4->hdmi->ddc);
+ if (!edid)
+ return -ENODEV;
+
+ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid);
+ drm_mode_connector_update_edid_property(connector, edid);
+ ret = drm_add_edid_modes(connector, edid);
+
+ return ret;
+}
+
+/* Since we can't set the pixel clock yet, filter out all the EDID
+ * modes that don't match what was set up by the firmware.
+ */
+int vc4_hdmi_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = connector->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_display_mode *boot_mode = &vc4->hdmi->boot_mode;
+
+ if (mode->hdisplay != boot_mode->hdisplay ||
+ mode->hsync_start != boot_mode->hsync_start ||
+ mode->hsync_end != boot_mode->hsync_end ||
+ mode->htotal != boot_mode->htotal) {
+ return MODE_ERROR;
+ }
+
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+vc4_hdmi_connector_best_encoder(struct drm_connector *connector)
+{
+ struct vc4_hdmi_connector *hdmi_connector =
+ to_vc4_hdmi_connector(connector);
+ return hdmi_connector->encoder;
+}
+
+static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .detect = vc4_hdmi_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = vc4_hdmi_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = {
+ .get_modes = vc4_hdmi_connector_get_modes,
+ .mode_valid = vc4_hdmi_mode_valid,
+ .best_encoder = vc4_hdmi_connector_best_encoder,
+};
+
+struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
+ struct drm_encoder *encoder)
+{
+ struct drm_connector *connector = NULL;
+ struct vc4_hdmi_connector *hdmi_connector;
+ int ret = 0;
+
+ hdmi_connector = devm_kzalloc(dev->dev, sizeof(*hdmi_connector),
+ GFP_KERNEL);
+ if (!hdmi_connector) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ connector = &hdmi_connector->base;
+
+ hdmi_connector->encoder = encoder;
+
+ drm_connector_init(dev, connector, &vc4_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA);
+ drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
+
+ connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ drm_connector_register(connector);
+
+ drm_mode_connector_attach_encoder(connector, encoder);
+
+ return connector;
+
+ fail:
+ if (connector)
+ vc4_hdmi_connector_destroy(connector);
+
+ return ERR_PTR(ret);
+}
+
+static void vc4_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs vc4_hdmi_encoder_funcs = {
+ .destroy = vc4_encoder_destroy,
+};
+
+static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *unadjusted_mode,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ bool debug_dump_regs = false;
+ bool hsync_pos = !(mode->flags & DRM_MODE_FLAG_NHSYNC);
+ bool vsync_pos = !(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ u32 vactive = (mode->vdisplay >>
+ ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? 1 : 0));
+ u32 verta = (VC4_SET_FIELD(mode->vsync_end - mode->vsync_start,
+ VC4_HDMI_VERTA_VSP) |
+ VC4_SET_FIELD(mode->vsync_start - mode->vdisplay,
+ VC4_HDMI_VERTA_VFP) |
+ VC4_SET_FIELD(vactive, VC4_HDMI_VERTA_VAL));
+ u32 vertb = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) |
+ VC4_SET_FIELD(mode->vtotal - mode->vsync_end,
+ VC4_HDMI_VERTB_VBP));
+
+ if (debug_dump_regs) {
+ DRM_INFO("HDMI regs before:\n");
+ vc4_hdmi_dump_regs(dev);
+ }
+
+ HD_WRITE(VC4_HD_VID_CTL, 0);
+
+ /* XXX: This is where we would set the HDMI state machine
+ * clock, if we had an interface for it.
+ */
+
+ HDMI_WRITE(VC4_HDMI_SCHEDULER_CONTROL,
+ HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) |
+ VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT |
+ VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
+
+ HDMI_WRITE(VC4_HDMI_HORZA,
+ (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
+ (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
+ VC4_SET_FIELD(mode->hdisplay, VC4_HDMI_HORZA_HAP));
+
+ HDMI_WRITE(VC4_HDMI_HORZB,
+ VC4_SET_FIELD(mode->htotal - mode->hsync_end,
+ VC4_HDMI_HORZB_HBP) |
+ VC4_SET_FIELD(mode->hsync_end - mode->hsync_start,
+ VC4_HDMI_HORZB_HSP) |
+ VC4_SET_FIELD(mode->hsync_start - mode->hdisplay,
+ VC4_HDMI_HORZB_HFP));
+
+ HDMI_WRITE(VC4_HDMI_VERTA0, verta);
+ HDMI_WRITE(VC4_HDMI_VERTA1, verta);
+
+ HDMI_WRITE(VC4_HDMI_VERTB0, vertb);
+ HDMI_WRITE(VC4_HDMI_VERTB1, vertb);
+
+ HD_WRITE(VC4_HD_VID_CTL,
+ (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
+ (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+
+ /* The RGB order applies even when CSC is disabled. */
+ HD_WRITE(VC4_HD_CSC_CTL, VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
+ VC4_HD_CSC_CTL_ORDER));
+
+ HDMI_WRITE(VC4_HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
+
+ if (debug_dump_regs) {
+ DRM_INFO("HDMI regs after:\n");
+ vc4_hdmi_dump_regs(dev);
+ }
+}
+
+static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ HD_WRITE(VC4_HD_VID_CTL,
+ HD_READ(VC4_HD_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
+}
+
+static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+ struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0);
+
+ HD_WRITE(VC4_HD_VID_CTL,
+ HD_READ(VC4_HD_VID_CTL) |
+ VC4_HD_VID_CTL_ENABLE |
+ VC4_HD_VID_CTL_UNDERFLOW_ENABLE |
+ VC4_HD_VID_CTL_FRAME_COUNTER_RESET);
+
+ if (vc4_encoder->hdmi_monitor) {
+ HDMI_WRITE(VC4_HDMI_SCHEDULER_CONTROL,
+ HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) |
+ VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI);
+
+ while (!(HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+ VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE)) {
+ cpu_relax();
+ }
+ } else {
+ HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
+ HDMI_READ(VC4_HDMI_RAM_PACKET_CONFIG) &
+ ~(VC4_HDMI_RAM_PACKET_ENABLE));
+ HDMI_WRITE(VC4_HDMI_SCHEDULER_CONTROL,
+ HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+ ~VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI);
+
+ while (HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+ VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE) {
+ cpu_relax();
+ }
+ }
+
+ if (vc4_encoder->hdmi_monitor) {
+ u32 drift;
+
+ WARN_ON(!(HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+ VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE));
+ HDMI_WRITE(VC4_HDMI_SCHEDULER_CONTROL,
+ HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) |
+ VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT);
+
+ /* XXX: Set HDMI_RAM_PACKET_CONFIG (1 << 16) and set
+ * up the infoframe.
+ */
+
+ drift = HDMI_READ(VC4_HDMI_FIFO_CTL);
+ drift &= VC4_HDMI_FIFO_VALID_WRITE_MASK;
+
+ HDMI_WRITE(VC4_HDMI_FIFO_CTL,
+ drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
+ HDMI_WRITE(VC4_HDMI_FIFO_CTL,
+ drift | VC4_HDMI_FIFO_CTL_RECENTER);
+ udelay(1000);
+ HDMI_WRITE(VC4_HDMI_FIFO_CTL,
+ drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
+ HDMI_WRITE(VC4_HDMI_FIFO_CTL,
+ drift | VC4_HDMI_FIFO_CTL_RECENTER);
+
+ while ((HDMI_READ(VC4_HDMI_FIFO_CTL) &
+ VC4_HDMI_FIFO_CTL_RECENTER_DONE) == 0) {
+ cpu_relax();
+ }
+ }
+}
+
+static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
+ .mode_set = vc4_hdmi_encoder_mode_set,
+ .disable = vc4_hdmi_encoder_disable,
+ .enable = vc4_hdmi_encoder_enable,
+};
+
+static struct drm_crtc *
+vc4_get_crtc_node(struct platform_device *pdev)
+{
+ struct device_node *crtc_node;
+ struct platform_device *crtc_pdev;
+
+ crtc_node = of_parse_phandle(pdev->dev.of_node, "crtc", 0);
+ if (!crtc_node) {
+ DRM_ERROR("No CRTC for hdmi in DT\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ crtc_pdev = of_find_device_by_node(crtc_node);
+ if (!crtc_pdev) {
+ DRM_ERROR("No CRTC device attached to OF node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return platform_get_drvdata(crtc_pdev);
+}
+
+struct drm_encoder *vc4_hdmi_encoder_init(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_encoder *encoder = NULL;
+ struct vc4_hdmi_encoder *vc4_hdmi_encoder;
+ struct drm_crtc *crtc;
+ int ret;
+
+ vc4_hdmi_encoder = devm_kzalloc(dev->dev, sizeof(*vc4_hdmi_encoder),
+ GFP_KERNEL);
+ if (!vc4_hdmi_encoder) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ encoder = &vc4_hdmi_encoder->base;
+
+ crtc = vc4_get_crtc_node(vc4->hdmi->pdev);
+ if (IS_ERR(crtc)) {
+ ret = PTR_ERR(crtc);
+ goto fail;
+ }
+
+ drm_encoder_init(dev, encoder, &vc4_hdmi_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(encoder, &vc4_hdmi_encoder_helper_funcs);
+
+ encoder->possible_crtcs = drm_crtc_mask(crtc);
+
+ return encoder;
+
+fail:
+ if (encoder)
+ vc4_encoder_destroy(encoder);
+
+ return ERR_PTR(ret);
+}
+
+/* Reads out the current HDMI mode progreamming at driver load time.
+ *
+ * This is currently used for later filtering out of the DDC-probed
+ * video modes, since we can't actually change modes due to not having
+ * control of the necessary clocks. Later on, we may end up reusing
+ * this for skipping modesets at boot time.
+ */
+static void
+vc4_hdmi_get_boot_display_mode(struct vc4_dev *vc4)
+{
+ struct drm_display_mode *mode = &vc4->hdmi->boot_mode;
+ u32 horza = HDMI_READ(VC4_HDMI_HORZA);
+ u32 horzb = HDMI_READ(VC4_HDMI_HORZB);
+ u32 verta = HDMI_READ(VC4_HDMI_VERTA0);
+ u32 vertb = HDMI_READ(VC4_HDMI_VERTB0);
+
+ memset(mode, 0, sizeof(*mode));
+
+ if (!(horza & VC4_HDMI_HORZA_VPOS))
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
+ if (!(horza & VC4_HDMI_HORZA_HPOS))
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+ mode->hdisplay = VC4_GET_FIELD(horza, VC4_HDMI_HORZA_HAP);
+ mode->hsync_start = (mode->hdisplay +
+ VC4_GET_FIELD(horzb, VC4_HDMI_HORZB_HFP));
+ mode->hsync_end = (mode->hsync_start +
+ VC4_GET_FIELD(horzb, VC4_HDMI_HORZB_HSP));
+ mode->htotal = (mode->hsync_end +
+ VC4_GET_FIELD(horzb, VC4_HDMI_HORZB_HBP));
+
+ mode->vdisplay = VC4_GET_FIELD(verta, VC4_HDMI_VERTA_VAL);
+ mode->vsync_start = (mode->vdisplay +
+ VC4_GET_FIELD(verta, VC4_HDMI_VERTA_VFP));
+ mode->vsync_end = (mode->vsync_start +
+ VC4_GET_FIELD(verta, VC4_HDMI_VERTA_VSP));
+ mode->vtotal = (mode->vsync_end +
+ VC4_GET_FIELD(vertb, VC4_HDMI_VERTB_VBP));
+}
+
+static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = drm->dev_private;
+ struct vc4_hdmi *hdmi;
+ struct device_node *ddc_node;
+ u32 value;
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ hdmi->pdev = pdev;
+ hdmi->hdmicore_regs = vc4_ioremap_regs(pdev, 0);
+ if (IS_ERR(hdmi->hdmicore_regs))
+ return PTR_ERR(hdmi->hdmicore_regs);
+
+ hdmi->hd_regs = vc4_ioremap_regs(pdev, 1);
+ if (IS_ERR(hdmi->hd_regs))
+ return PTR_ERR(hdmi->hd_regs);
+
+ /* DDC i2c driver */
+ ddc_node = of_parse_phandle(dev->of_node, "ddc", 0);
+ if (!ddc_node) {
+ DRM_ERROR("Failed to find ddc node in device tree\n");
+ return -ENODEV;
+ }
+
+ hdmi->ddc = of_find_i2c_adapter_by_node(ddc_node);
+ if (!hdmi->ddc) {
+ DRM_ERROR("Failed to get ddc i2c adapter by node\n");
+ return -EPROBE_DEFER;
+ }
+
+ /* Only use the GPIO HPD pin if present in the DT, otherwise
+ * we'll use the HDMI core's register.
+ */
+ if (of_find_property(dev->of_node, "hpd-gpio", &value)) {
+ hdmi->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpio", 0);
+ if (hdmi->hpd_gpio < 0)
+ return hdmi->hpd_gpio;
+ }
+
+ vc4->hdmi = hdmi;
+
+ /* HDMI core must be enabled. */
+ WARN_ON_ONCE((HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE) == 0);
+
+ vc4_hdmi_get_boot_display_mode(vc4);
+
+ return 0;
+}
+
+static void vc4_hdmi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = drm->dev_private;
+
+ put_device(&vc4->hdmi->ddc->dev);
+
+ vc4->hdmi = NULL;
+}
+
+static const struct component_ops vc4_hdmi_ops = {
+ .bind = vc4_hdmi_bind,
+ .unbind = vc4_hdmi_unbind,
+};
+
+static int vc4_hdmi_dev_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &vc4_hdmi_ops);
+}
+
+static int vc4_hdmi_dev_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &vc4_hdmi_ops);
+ return 0;
+}
+
+static const struct of_device_id vc4_hdmi_dt_match[] = {
+ { .compatible = "brcm,vc4-hdmi" },
+ {}
+};
+
+struct platform_driver vc4_hdmi_driver = {
+ .probe = vc4_hdmi_dev_probe,
+ .remove = vc4_hdmi_dev_remove,
+ .driver = {
+ .name = "vc4_hdmi",
+ .of_match_table = vc4_hdmi_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
new file mode 100644
index 0000000..34906fd
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * DOC: VC4 HVS module.
+ *
+ * The HVS is the piece of hardware that does translation, scaling,
+ * colorspace conversion, and compositing of pixels stored in
+ * framebuffers into a FIFO of pixels going out to the Pixel Valve
+ * (CRTC).
+ *
+ * There is a single global HVS, with multiple output FIFOs that can
+ * be consumed by the PVs. This file just manages the resources for
+ * the HVS, while the vc4_crtc.c code actually drives HVS setup for
+ * each CRTC.
+ */
+
+#include "linux/component.h"
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+#define HVS_REG(reg) { reg, #reg }
+static const struct {
+ u32 reg;
+ const char *name;
+} hvs_regs[] = {
+ HVS_REG(SCALER_DISPCTRL),
+ HVS_REG(SCALER_DISPSTAT),
+ HVS_REG(SCALER_DISPID),
+ HVS_REG(SCALER_DISPECTRL),
+ HVS_REG(SCALER_DISPPROF),
+ HVS_REG(SCALER_DISPDITHER),
+ HVS_REG(SCALER_DISPEOLN),
+ HVS_REG(SCALER_DISPLIST0),
+ HVS_REG(SCALER_DISPLIST1),
+ HVS_REG(SCALER_DISPLIST2),
+ HVS_REG(SCALER_DISPLSTAT),
+ HVS_REG(SCALER_DISPLACT0),
+ HVS_REG(SCALER_DISPLACT1),
+ HVS_REG(SCALER_DISPLACT2),
+ HVS_REG(SCALER_DISPCTRL0),
+ HVS_REG(SCALER_DISPBKGND0),
+ HVS_REG(SCALER_DISPSTAT0),
+ HVS_REG(SCALER_DISPBASE0),
+ HVS_REG(SCALER_DISPCTRL1),
+ HVS_REG(SCALER_DISPBKGND1),
+ HVS_REG(SCALER_DISPSTAT1),
+ HVS_REG(SCALER_DISPBASE1),
+ HVS_REG(SCALER_DISPCTRL2),
+ HVS_REG(SCALER_DISPBKGND2),
+ HVS_REG(SCALER_DISPSTAT2),
+ HVS_REG(SCALER_DISPBASE2),
+ HVS_REG(SCALER_DISPALPHA2),
+};
+
+void vc4_hvs_dump_state(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hvs_regs); i++) {
+ DRM_INFO("0x%04x (%s): 0x%08x\n",
+ hvs_regs[i].reg, hvs_regs[i].name,
+ HVS_READ(hvs_regs[i].reg));
+ }
+
+ DRM_INFO("HVS ctx:\n");
+ for (i = 0; i < 64; i += 4) {
+ DRM_INFO("0x%08x (%s): 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i * 4, i < HVS_BOOTLOADER_DLIST_END ? "B" : "D",
+ ((uint32_t *)vc4->hvs->dlist)[i + 0],
+ ((uint32_t *)vc4->hvs->dlist)[i + 1],
+ ((uint32_t *)vc4->hvs->dlist)[i + 2],
+ ((uint32_t *)vc4->hvs->dlist)[i + 3]);
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hvs_regs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ hvs_regs[i].name, hvs_regs[i].reg,
+ HVS_READ(hvs_regs[i].reg));
+ }
+
+ return 0;
+}
+#endif
+
+static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = drm->dev_private;
+ struct vc4_hvs *hvs = NULL;
+
+ hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL);
+ if (!hvs)
+ return -ENOMEM;
+
+ hvs->pdev = pdev;
+
+ hvs->regs = vc4_ioremap_regs(pdev, 0);
+ if (IS_ERR(hvs->regs))
+ return PTR_ERR(hvs->regs);
+
+ hvs->dlist = hvs->regs + SCALER_DLIST_START;
+
+ vc4->hvs = hvs;
+ return 0;
+}
+
+static void vc4_hvs_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = drm->dev_private;
+
+ vc4->hvs = NULL;
+}
+
+static const struct component_ops vc4_hvs_ops = {
+ .bind = vc4_hvs_bind,
+ .unbind = vc4_hvs_unbind,
+};
+
+static int vc4_hvs_dev_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &vc4_hvs_ops);
+}
+
+static int vc4_hvs_dev_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &vc4_hvs_ops);
+ return 0;
+}
+
+static const struct of_device_id vc4_hvs_dt_match[] = {
+ { .compatible = "brcm,vc4-hvs" },
+ {}
+};
+
+struct platform_driver vc4_hvs_driver = {
+ .probe = vc4_hvs_dev_probe,
+ .remove = vc4_hvs_dev_remove,
+ .driver = {
+ .name = "vc4_hvs",
+ .of_match_table = vc4_hvs_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
new file mode 100644
index 0000000..e5e96bc
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * DOC: VC4 KMS
+ *
+ * This is the general code for implementing KMS mode setting that
+ * doesn't clearly associate with any of the other objects (plane,
+ * crtc, HDMI encoder).
+ */
+
+#include "drm_crtc.h"
+#include "drm_atomic_helper.h"
+#include "drm_crtc_helper.h"
+#include "drm_plane_helper.h"
+#include "drm_fb_cma_helper.h"
+#include "vc4_drv.h"
+
+static const struct drm_mode_config_funcs vc4_mode_funcs = {
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+ .fb_create = drm_fb_cma_create,
+};
+
+/* Calls out to initialize all of the VC4 KMS objects. */
+static int vc4_init_modeset_objects(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+ int ret = 0;
+
+ encoder = vc4_hdmi_encoder_init(dev);
+ if (IS_ERR(encoder)) {
+ dev_err(dev->dev, "failed to construct HDMI encoder\n");
+ ret = PTR_ERR(encoder);
+ goto fail;
+ }
+
+ connector = vc4_hdmi_connector_init(dev, encoder);
+ if (IS_ERR(connector)) {
+ ret = PTR_ERR(connector);
+ dev_err(dev->dev, "failed to initialize HDMI connector\n");
+ goto fail;
+ }
+
+fail:
+ return ret;
+}
+
+int vc4_kms_load(struct drm_device *dev)
+{
+ int ret;
+
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize vblank\n");
+ return ret;
+ }
+
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ dev->mode_config.funcs = &vc4_mode_funcs;
+ dev->mode_config.preferred_depth = 24;
+
+ ret = vc4_init_modeset_objects(dev);
+ if (ret)
+ goto fail;
+
+ drm_mode_config_reset(dev);
+
+ drm_fbdev_cma_init(dev, 32,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+
+ drm_kms_helper_poll_init(dev);
+
+fail:
+ return ret;
+}
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
new file mode 100644
index 0000000..cdd8b10
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * DOC: VC4 plane module
+ *
+ * Each DRM plane is a layer of pixels being scanned out by the HVS.
+ *
+ * At atomic modeset check time, we compute the HVS display element
+ * state that would be necessary for displaying the plane (giving us a
+ * chance to figure out if a plane configuration is invalid), then at
+ * atomic flush time the CRTC will ask us to write our element state
+ * into the region of the HVS that it has allocated for us.
+ */
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+#include "drm_atomic_helper.h"
+#include "drm_fb_cma_helper.h"
+#include "drm_plane_helper.h"
+
+struct vc4_plane_state {
+ struct drm_plane_state base;
+ u32 *dlist;
+ u32 dlist_size; /* Number of dwords in allocated for the display list */
+ u32 dlist_count; /* Number of used dwords in the display list. */
+};
+
+static inline struct vc4_plane_state *
+to_vc4_plane_state(struct drm_plane_state *state)
+{
+ return (struct vc4_plane_state *)state;
+}
+
+static const struct hvs_format {
+ u32 drm; /* DRM_FORMAT_* */
+ u32 hvs; /* HVS_FORMAT_* */
+ u32 pixel_order;
+ bool has_alpha;
+} hvs_formats[] = {
+ {
+ .drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
+ .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
+ },
+ {
+ .drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
+ .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
+ },
+};
+
+static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
+{
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
+ if (hvs_formats[i].drm == drm_format)
+ return &hvs_formats[i];
+ }
+
+ return NULL;
+}
+
+static bool plane_enabled(struct drm_plane_state *state)
+{
+ return state->fb && state->crtc;
+}
+
+struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
+{
+ struct vc4_plane_state *vc4_state;
+
+ if (WARN_ON(!plane->state))
+ return NULL;
+
+ vc4_state = kmemdup(plane->state, sizeof(*vc4_state), GFP_KERNEL);
+ if (!vc4_state)
+ return NULL;
+
+ __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
+
+ if (vc4_state->dlist) {
+ vc4_state->dlist = kmemdup(vc4_state->dlist,
+ vc4_state->dlist_count * 4,
+ GFP_KERNEL);
+ if (!vc4_state->dlist) {
+ kfree(vc4_state);
+ return NULL;
+ }
+ vc4_state->dlist_size = vc4_state->dlist_count;
+ }
+
+ return &vc4_state->base;
+}
+
+void vc4_plane_destroy_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ kfree(vc4_state->dlist);
+ __drm_atomic_helper_plane_destroy_state(plane, &vc4_state->base);
+ kfree(state);
+}
+
+/* Called during init to allocate the plane's atomic state. */
+void vc4_plane_reset(struct drm_plane *plane)
+{
+ struct vc4_plane_state *vc4_state;
+
+ WARN_ON(plane->state);
+
+ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
+ if (!vc4_state)
+ return;
+
+ plane->state = &vc4_state->base;
+ vc4_state->base.plane = plane;
+}
+
+static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
+{
+ if (vc4_state->dlist_count == vc4_state->dlist_size) {
+ u32 new_size = max(4u, vc4_state->dlist_count * 2);
+ u32 *new_dlist = kmalloc(new_size * 4, GFP_KERNEL);
+
+ if (!new_dlist)
+ return;
+ memcpy(new_dlist, vc4_state->dlist, vc4_state->dlist_count * 4);
+
+ kfree(vc4_state->dlist);
+ vc4_state->dlist = new_dlist;
+ vc4_state->dlist_size = new_size;
+ }
+
+ vc4_state->dlist[vc4_state->dlist_count++] = val;
+}
+
+/* Writes out a full display list for an active plane to the plane's
+ * private dlist state.
+ */
+static int vc4_plane_mode_set(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
+ u32 ctl0_offset = vc4_state->dlist_count;
+ const struct hvs_format *format = vc4_get_hvs_format(fb->pixel_format);
+ uint32_t offset = fb->offsets[0];
+ int crtc_x = state->crtc_x;
+ int crtc_y = state->crtc_y;
+ int crtc_w = state->crtc_w;
+ int crtc_h = state->crtc_h;
+
+ if (crtc_x < 0) {
+ offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
+ crtc_w += crtc_x;
+ crtc_x = 0;
+ }
+
+ if (crtc_y < 0) {
+ offset += fb->pitches[0] * -crtc_y;
+ crtc_h += crtc_y;
+ crtc_y = 0;
+ }
+
+ vc4_dlist_write(vc4_state,
+ SCALER_CTL0_VALID |
+ (format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
+ (format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
+ SCALER_CTL0_UNITY);
+
+ /* Position Word 0: Image Positions and Alpha Value */
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
+ VC4_SET_FIELD(crtc_x, SCALER_POS0_START_X) |
+ VC4_SET_FIELD(crtc_y, SCALER_POS0_START_Y));
+
+ /* Position Word 1: Scaled Image Dimensions.
+ * Skipped due to SCALER_CTL0_UNITY scaling.
+ */
+
+ /* Position Word 2: Source Image Size, Alpha Mode */
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(format->has_alpha ?
+ SCALER_POS2_ALPHA_MODE_PIPELINE :
+ SCALER_POS2_ALPHA_MODE_FIXED,
+ SCALER_POS2_ALPHA_MODE) |
+ VC4_SET_FIELD(crtc_w, SCALER_POS2_WIDTH) |
+ VC4_SET_FIELD(crtc_h, SCALER_POS2_HEIGHT));
+
+ /* Position Word 3: Context. Written by the HVS. */
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+
+ /* Pointer Word 0: RGB / Y Pointer */
+ vc4_dlist_write(vc4_state, bo->paddr + offset);
+
+ /* Pointer Context Word 0: Written by the HVS */
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+
+ /* Pitch word 0: Pointer 0 Pitch */
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH));
+
+ vc4_state->dlist[ctl0_offset] |=
+ VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
+
+ return 0;
+}
+
+/* If a modeset involves changing the setup of a plane, the atomic
+ * infrastructure will call this to validate a proposed plane setup.
+ * However, if a plane isn't getting updated, this (and the
+ * corresponding vc4_plane_atomic_update) won't get called. Thus, we
+ * compute the dlist here and have all active plane dlists get updated
+ * in the CRTC's flush.
+ */
+static int vc4_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ vc4_state->dlist_count = 0;
+
+ if (plane_enabled(state))
+ return vc4_plane_mode_set(plane, state);
+ else
+ return 0;
+}
+
+static void vc4_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ /* No contents here. Since we don't know where in the CRTC's
+ * dlist we should be stored, our dlist is uploaded to the
+ * hardware with vc4_plane_write_dlist() at CRTC atomic_flush
+ * time.
+ */
+}
+
+u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
+ int i;
+
+ /* Can't memcpy_toio() because it needs to be 32-bit writes. */
+ for (i = 0; i < vc4_state->dlist_count; i++)
+ writel(vc4_state->dlist[i], &dlist[i]);
+
+ return vc4_state->dlist_count;
+}
+
+u32 vc4_plane_dlist_size(struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ return vc4_state->dlist_count;
+}
+
+static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
+ .prepare_fb = NULL,
+ .cleanup_fb = NULL,
+ .atomic_check = vc4_plane_atomic_check,
+ .atomic_update = vc4_plane_atomic_update,
+};
+
+static void vc4_plane_destroy(struct drm_plane *plane)
+{
+ drm_plane_helper_disable(plane);
+ drm_plane_cleanup(plane);
+}
+
+static const struct drm_plane_funcs vc4_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .destroy = vc4_plane_destroy,
+ .set_property = NULL,
+ .reset = vc4_plane_reset,
+ .atomic_duplicate_state = vc4_plane_duplicate_state,
+ .atomic_destroy_state = vc4_plane_destroy_state,
+};
+
+struct drm_plane *vc4_plane_init(struct drm_device *dev,
+ enum drm_plane_type type)
+{
+ struct drm_plane *plane = NULL;
+ struct vc4_plane *vc4_plane;
+ u32 formats[ARRAY_SIZE(hvs_formats)];
+ int ret = 0;
+ unsigned i;
+
+ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane),
+ GFP_KERNEL);
+ if (!vc4_plane) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hvs_formats); i++)
+ formats[i] = hvs_formats[i].drm;
+ plane = &vc4_plane->base;
+ ret = drm_universal_plane_init(dev, plane, 0xff,
+ &vc4_plane_funcs,
+ formats, ARRAY_SIZE(formats),
+ type);
+
+ drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
+
+ return plane;
+fail:
+ if (plane)
+ vc4_plane_destroy(plane);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
new file mode 100644
index 0000000..0eff631
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -0,0 +1,562 @@
+/*
+ * Copyright © 2014-2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VC4_MASK(high, low) (((1 << ((high) - (low) + 1)) - 1) << (low))
+/* Using the GNU statement expression extension */
+#define VC4_SET_FIELD(value, field) \
+ ({ \
+ uint32_t fieldval = (value) << field##_SHIFT; \
+ WARN_ON((fieldval & ~field##_MASK) != 0); \
+ fieldval & field##_MASK; \
+ })
+
+#define VC4_GET_FIELD(word, field) (((word) & field##_MASK) >> \
+ field##_SHIFT)
+
+#define V3D_IDENT0 0x00000
+# define V3D_EXPECTED_IDENT0 \
+ ((2 << 24) | \
+ ('V' << 0) | \
+ ('3' << 8) | \
+ ('D' << 16))
+
+#define V3D_IDENT1 0x00004
+/* Multiples of 1kb */
+# define V3D_IDENT1_VPM_SIZE_MASK VC4_MASK(31, 28)
+# define V3D_IDENT1_VPM_SIZE_SHIFT 28
+# define V3D_IDENT1_NSEM_MASK VC4_MASK(23, 16)
+# define V3D_IDENT1_NSEM_SHIFT 16
+# define V3D_IDENT1_TUPS_MASK VC4_MASK(15, 12)
+# define V3D_IDENT1_TUPS_SHIFT 12
+# define V3D_IDENT1_QUPS_MASK VC4_MASK(11, 8)
+# define V3D_IDENT1_QUPS_SHIFT 8
+# define V3D_IDENT1_NSLC_MASK VC4_MASK(7, 4)
+# define V3D_IDENT1_NSLC_SHIFT 4
+# define V3D_IDENT1_REV_MASK VC4_MASK(3, 0)
+# define V3D_IDENT1_REV_SHIFT 0
+
+#define V3D_IDENT2 0x00008
+#define V3D_SCRATCH 0x00010
+#define V3D_L2CACTL 0x00020
+# define V3D_L2CACTL_L2CCLR (1 << 2)
+# define V3D_L2CACTL_L2CDIS (1 << 1)
+# define V3D_L2CACTL_L2CENA (1 << 0)
+
+#define V3D_SLCACTL 0x00024
+# define V3D_SLCACTL_T1CC_MASK VC4_MASK(27, 24)
+# define V3D_SLCACTL_T1CC_SHIFT 24
+# define V3D_SLCACTL_T0CC_MASK VC4_MASK(19, 16)
+# define V3D_SLCACTL_T0CC_SHIFT 16
+# define V3D_SLCACTL_UCC_MASK VC4_MASK(11, 8)
+# define V3D_SLCACTL_UCC_SHIFT 8
+# define V3D_SLCACTL_ICC_MASK VC4_MASK(3, 0)
+# define V3D_SLCACTL_ICC_SHIFT 0
+
+#define V3D_INTCTL 0x00030
+#define V3D_INTENA 0x00034
+#define V3D_INTDIS 0x00038
+# define V3D_INT_SPILLUSE (1 << 3)
+# define V3D_INT_OUTOMEM (1 << 2)
+# define V3D_INT_FLDONE (1 << 1)
+# define V3D_INT_FRDONE (1 << 0)
+
+#define V3D_CT0CS 0x00100
+#define V3D_CT1CS 0x00104
+#define V3D_CTNCS(n) (V3D_CT0CS + 4 * n)
+# define V3D_CTRSTA (1 << 15)
+# define V3D_CTSEMA (1 << 12)
+# define V3D_CTRTSD (1 << 8)
+# define V3D_CTRUN (1 << 5)
+# define V3D_CTSUBS (1 << 4)
+# define V3D_CTERR (1 << 3)
+# define V3D_CTMODE (1 << 0)
+
+#define V3D_CT0EA 0x00108
+#define V3D_CT1EA 0x0010c
+#define V3D_CTNEA(n) (V3D_CT0EA + 4 * (n))
+#define V3D_CT0CA 0x00110
+#define V3D_CT1CA 0x00114
+#define V3D_CTNCA(n) (V3D_CT0CA + 4 * (n))
+#define V3D_CT00RA0 0x00118
+#define V3D_CT01RA0 0x0011c
+#define V3D_CTNRA0(n) (V3D_CT00RA0 + 4 * (n))
+#define V3D_CT0LC 0x00120
+#define V3D_CT1LC 0x00124
+#define V3D_CTNLC(n) (V3D_CT0LC + 4 * (n))
+#define V3D_CT0PC 0x00128
+#define V3D_CT1PC 0x0012c
+#define V3D_CTNPC(n) (V3D_CT0PC + 4 * (n))
+
+#define V3D_PCS 0x00130
+# define V3D_BMOOM (1 << 8)
+# define V3D_RMBUSY (1 << 3)
+# define V3D_RMACTIVE (1 << 2)
+# define V3D_BMBUSY (1 << 1)
+# define V3D_BMACTIVE (1 << 0)
+
+#define V3D_BFC 0x00134
+#define V3D_RFC 0x00138
+#define V3D_BPCA 0x00300
+#define V3D_BPCS 0x00304
+#define V3D_BPOA 0x00308
+#define V3D_BPOS 0x0030c
+#define V3D_BXCF 0x00310
+#define V3D_SQRSV0 0x00410
+#define V3D_SQRSV1 0x00414
+#define V3D_SQCNTL 0x00418
+#define V3D_SRQPC 0x00430
+#define V3D_SRQUA 0x00434
+#define V3D_SRQUL 0x00438
+#define V3D_SRQCS 0x0043c
+#define V3D_VPACNTL 0x00500
+#define V3D_VPMBASE 0x00504
+#define V3D_PCTRC 0x00670
+#define V3D_PCTRE 0x00674
+#define V3D_PCTR0 0x00680
+#define V3D_PCTRS0 0x00684
+#define V3D_PCTR1 0x00688
+#define V3D_PCTRS1 0x0068c
+#define V3D_PCTR2 0x00690
+#define V3D_PCTRS2 0x00694
+#define V3D_PCTR3 0x00698
+#define V3D_PCTRS3 0x0069c
+#define V3D_PCTR4 0x006a0
+#define V3D_PCTRS4 0x006a4
+#define V3D_PCTR5 0x006a8
+#define V3D_PCTRS5 0x006ac
+#define V3D_PCTR6 0x006b0
+#define V3D_PCTRS6 0x006b4
+#define V3D_PCTR7 0x006b8
+#define V3D_PCTRS7 0x006bc
+#define V3D_PCTR8 0x006c0
+#define V3D_PCTRS8 0x006c4
+#define V3D_PCTR9 0x006c8
+#define V3D_PCTRS9 0x006cc
+#define V3D_PCTR10 0x006d0
+#define V3D_PCTRS10 0x006d4
+#define V3D_PCTR11 0x006d8
+#define V3D_PCTRS11 0x006dc
+#define V3D_PCTR12 0x006e0
+#define V3D_PCTRS12 0x006e4
+#define V3D_PCTR13 0x006e8
+#define V3D_PCTRS13 0x006ec
+#define V3D_PCTR14 0x006f0
+#define V3D_PCTRS14 0x006f4
+#define V3D_PCTR15 0x006f8
+#define V3D_PCTRS15 0x006fc
+#define V3D_BGE 0x00f00
+#define V3D_FDBGO 0x00f04
+#define V3D_FDBGB 0x00f08
+#define V3D_FDBGR 0x00f0c
+#define V3D_FDBGS 0x00f10
+#define V3D_ERRSTAT 0x00f20
+
+#define PV_CONTROL 0x00
+# define PV_CONTROL_FORMAT_MASK VC4_MASK(23, 21)
+# define PV_CONTROL_FORMAT_SHIFT 21
+# define PV_CONTROL_FORMAT_24 0
+# define PV_CONTROL_FORMAT_DSIV_16 1
+# define PV_CONTROL_FORMAT_DSIC_16 2
+# define PV_CONTROL_FORMAT_DSIV_18 3
+# define PV_CONTROL_FORMAT_DSIV_24 4
+
+# define PV_CONTROL_FIFO_LEVEL_MASK VC4_MASK(20, 15)
+# define PV_CONTROL_FIFO_LEVEL_SHIFT 15
+# define PV_CONTROL_CLR_AT_START (1 << 14)
+# define PV_CONTROL_TRIGGER_UNDERFLOW (1 << 13)
+# define PV_CONTROL_WAIT_HSTART (1 << 12)
+# define PV_CONTROL_CLK_SELECT_DSI 0
+# define PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI 1
+# define PV_CONTROL_CLK_SELECT_MASK VC4_MASK(3, 2)
+# define PV_CONTROL_CLK_SELECT_SHIFT 2
+# define PV_CONTROL_FIFO_CLR (1 << 1)
+# define PV_CONTROL_EN (1 << 0)
+
+#define PV_V_CONTROL 0x04
+# define PV_VCONTROL_CONTINUOUS (1 << 1)
+# define PV_VCONTROL_VIDEN (1 << 0)
+
+#define PV_VSYNCD 0x08
+
+#define PV_HORZA 0x0c
+# define PV_HORZA_HBP_MASK VC4_MASK(31, 16)
+# define PV_HORZA_HBP_SHIFT 16
+# define PV_HORZA_HSYNC_MASK VC4_MASK(15, 0)
+# define PV_HORZA_HSYNC_SHIFT 0
+
+#define PV_HORZB 0x10
+# define PV_HORZB_HFP_MASK VC4_MASK(31, 16)
+# define PV_HORZB_HFP_SHIFT 16
+# define PV_HORZB_HACTIVE_MASK VC4_MASK(15, 0)
+# define PV_HORZB_HACTIVE_SHIFT 0
+
+#define PV_VERTA 0x14
+# define PV_VERTA_VBP_MASK VC4_MASK(31, 16)
+# define PV_VERTA_VBP_SHIFT 16
+# define PV_VERTA_VSYNC_MASK VC4_MASK(15, 0)
+# define PV_VERTA_VSYNC_SHIFT 0
+
+#define PV_VERTB 0x18
+# define PV_VERTB_VFP_MASK VC4_MASK(31, 16)
+# define PV_VERTB_VFP_SHIFT 16
+# define PV_VERTB_VACTIVE_MASK VC4_MASK(15, 0)
+# define PV_VERTB_VACTIVE_SHIFT 0
+
+#define PV_VERTA_EVEN 0x1c
+#define PV_VERTB_EVEN 0x20
+
+#define PV_INTEN 0x24
+#define PV_INTSTAT 0x28
+# define PV_INT_VID_IDLE (1 << 9)
+# define PV_INT_VFP_END (1 << 8)
+# define PV_INT_VFP_START (1 << 7)
+# define PV_INT_VACT_START (1 << 6)
+# define PV_INT_VBP_START (1 << 5)
+# define PV_INT_VSYNC_START (1 << 4)
+# define PV_INT_HFP_START (1 << 3)
+# define PV_INT_HACT_START (1 << 2)
+# define PV_INT_HBP_START (1 << 1)
+# define PV_INT_HSYNC_START (1 << 0)
+
+#define PV_STAT 0x2c
+
+#define PV_HACT_ACT 0x30
+
+#define SCALER_DISPCTRL 0x00000000
+/* Global register for clock gating the HVS */
+# define SCALER_DISPCTRL_ENABLE (1 << 31)
+# define SCALER_DISPCTRL_DSP2EISLUR (1 << 15)
+# define SCALER_DISPCTRL_DSP1EISLUR (1 << 14)
+/* Enables Display 0 short line and underrun contribution to
+ * SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are
+ * always enabled.
+ */
+# define SCALER_DISPCTRL_DSP0EISLUR (1 << 13)
+# define SCALER_DISPCTRL_DSP2EIEOLN (1 << 12)
+# define SCALER_DISPCTRL_DSP2EIEOF (1 << 11)
+# define SCALER_DISPCTRL_DSP1EIEOLN (1 << 10)
+# define SCALER_DISPCTRL_DSP1EIEOF (1 << 9)
+/* Enables Display 0 end-of-line-N contribution to
+ * SCALER_DISPSTAT_IRQDISP0
+ */
+# define SCALER_DISPCTRL_DSP0EIEOLN (1 << 8)
+/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
+# define SCALER_DISPCTRL_DSP0EIEOF (1 << 7)
+
+# define SCALER_DISPCTRL_SLVRDEIRQ (1 << 6)
+# define SCALER_DISPCTRL_SLVWREIRQ (1 << 5)
+# define SCALER_DISPCTRL_DMAEIRQ (1 << 4)
+# define SCALER_DISPCTRL_DISP2EIRQ (1 << 3)
+# define SCALER_DISPCTRL_DISP1EIRQ (1 << 2)
+/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
+ * bits and short frames..
+ */
+# define SCALER_DISPCTRL_DISP0EIRQ (1 << 1)
+/* Enables interrupt generation on scaler profiler interrupt. */
+# define SCALER_DISPCTRL_SCLEIRQ (1 << 0)
+
+#define SCALER_DISPSTAT 0x00000004
+# define SCALER_DISPSTAT_COBLOW2 (1 << 29)
+# define SCALER_DISPSTAT_EOLN2 (1 << 28)
+# define SCALER_DISPSTAT_ESFRAME2 (1 << 27)
+# define SCALER_DISPSTAT_ESLINE2 (1 << 26)
+# define SCALER_DISPSTAT_EUFLOW2 (1 << 25)
+# define SCALER_DISPSTAT_EOF2 (1 << 24)
+
+# define SCALER_DISPSTAT_COBLOW1 (1 << 21)
+# define SCALER_DISPSTAT_EOLN1 (1 << 20)
+# define SCALER_DISPSTAT_ESFRAME1 (1 << 19)
+# define SCALER_DISPSTAT_ESLINE1 (1 << 18)
+# define SCALER_DISPSTAT_EUFLOW1 (1 << 17)
+# define SCALER_DISPSTAT_EOF1 (1 << 16)
+
+# define SCALER_DISPSTAT_RESP_MASK VC4_MASK(15, 14)
+# define SCALER_DISPSTAT_RESP_SHIFT 14
+# define SCALER_DISPSTAT_RESP_OKAY 0
+# define SCALER_DISPSTAT_RESP_EXOKAY 1
+# define SCALER_DISPSTAT_RESP_SLVERR 2
+# define SCALER_DISPSTAT_RESP_DECERR 3
+
+# define SCALER_DISPSTAT_COBLOW0 (1 << 13)
+/* Set when the DISPEOLN line is done compositing. */
+# define SCALER_DISPSTAT_EOLN0 (1 << 12)
+/* Set when VSTART is seen but there are still pixels in the current
+ * output line.
+ */
+# define SCALER_DISPSTAT_ESFRAME0 (1 << 11)
+/* Set when HSTART is seen but there are still pixels in the current
+ * output line.
+ */
+# define SCALER_DISPSTAT_ESLINE0 (1 << 10)
+/* Set when the the downstream tries to read from the display FIFO
+ * while it's empty.
+ */
+# define SCALER_DISPSTAT_EUFLOW0 (1 << 9)
+/* Set when the display mode changes from RUN to EOF */
+# define SCALER_DISPSTAT_EOF0 (1 << 8)
+
+/* Set on AXI invalid DMA ID error. */
+# define SCALER_DISPSTAT_DMA_ERROR (1 << 7)
+/* Set on AXI slave read decode error */
+# define SCALER_DISPSTAT_IRQSLVRD (1 << 6)
+/* Set on AXI slave write decode error */
+# define SCALER_DISPSTAT_IRQSLVWR (1 << 5)
+/* Set when SCALER_DISPSTAT_DMA_ERROR is set, or
+ * SCALER_DISPSTAT_RESP_ERROR is not SCALER_DISPSTAT_RESP_OKAY.
+ */
+# define SCALER_DISPSTAT_IRQDMA (1 << 4)
+# define SCALER_DISPSTAT_IRQDISP2 (1 << 3)
+# define SCALER_DISPSTAT_IRQDISP1 (1 << 2)
+/* Set when any of the EOF/EOLN/ESFRAME/ESLINE bits are set and their
+ * corresponding interrupt bit is enabled in DISPCTRL.
+ */
+# define SCALER_DISPSTAT_IRQDISP0 (1 << 1)
+/* On read, the profiler interrupt. On write, clear *all* interrupt bits. */
+# define SCALER_DISPSTAT_IRQSCL (1 << 0)
+
+#define SCALER_DISPID 0x00000008
+#define SCALER_DISPECTRL 0x0000000c
+#define SCALER_DISPPROF 0x00000010
+#define SCALER_DISPDITHER 0x00000014
+#define SCALER_DISPEOLN 0x00000018
+#define SCALER_DISPLIST0 0x00000020
+#define SCALER_DISPLIST1 0x00000024
+#define SCALER_DISPLIST2 0x00000028
+#define SCALER_DISPLSTAT 0x0000002c
+#define SCALER_DISPLISTX(x) (SCALER_DISPLIST0 + \
+ (x) * (SCALER_DISPLIST1 - \
+ SCALER_DISPLIST0))
+
+#define SCALER_DISPLACT0 0x00000030
+#define SCALER_DISPLACT1 0x00000034
+#define SCALER_DISPLACT2 0x00000038
+#define SCALER_DISPCTRL0 0x00000040
+# define SCALER_DISPCTRLX_ENABLE (1 << 31)
+# define SCALER_DISPCTRLX_RESET (1 << 30)
+# define SCALER_DISPCTRLX_WIDTH_MASK VC4_MASK(23, 12)
+# define SCALER_DISPCTRLX_WIDTH_SHIFT 12
+# define SCALER_DISPCTRLX_HEIGHT_MASK VC4_MASK(11, 0)
+# define SCALER_DISPCTRLX_HEIGHT_SHIFT 0
+
+#define SCALER_DISPBKGND0 0x00000044
+#define SCALER_DISPSTAT0 0x00000048
+#define SCALER_DISPBASE0 0x0000004c
+# define SCALER_DISPSTATX_MODE_MASK VC4_MASK(31, 30)
+# define SCALER_DISPSTATX_MODE_SHIFT 30
+# define SCALER_DISPSTATX_MODE_DISABLED 0
+# define SCALER_DISPSTATX_MODE_INIT 1
+# define SCALER_DISPSTATX_MODE_RUN 2
+# define SCALER_DISPSTATX_MODE_EOF 3
+# define SCALER_DISPSTATX_FULL (1 << 29)
+# define SCALER_DISPSTATX_EMPTY (1 << 28)
+#define SCALER_DISPCTRL1 0x00000050
+#define SCALER_DISPBKGND1 0x00000054
+#define SCALER_DISPSTAT1 0x00000058
+#define SCALER_DISPSTATX(x) (SCALER_DISPSTAT0 + \
+ (x) * (SCALER_DISPSTAT1 - \
+ SCALER_DISPSTAT0))
+#define SCALER_DISPBASE1 0x0000005c
+#define SCALER_DISPCTRL2 0x00000060
+#define SCALER_DISPCTRLX(x) (SCALER_DISPCTRL0 + \
+ (x) * (SCALER_DISPCTRL1 - \
+ SCALER_DISPCTRL0))
+#define SCALER_DISPBKGND2 0x00000064
+#define SCALER_DISPSTAT2 0x00000068
+#define SCALER_DISPBASE2 0x0000006c
+#define SCALER_DISPALPHA2 0x00000070
+#define SCALER_GAMADDR 0x00000078
+#define SCALER_GAMDATA 0x000000e0
+#define SCALER_DLIST_START 0x00002000
+#define SCALER_DLIST_SIZE 0x00004000
+
+#define VC4_HDMI_CORE_REV 0x000
+
+#define VC4_HDMI_SW_RESET_CONTROL 0x004
+# define VC4_HDMI_SW_RESET_FORMAT_DETECT (1 << 1)
+# define VC4_HDMI_SW_RESET_HDMI (1 << 0)
+
+#define VC4_HDMI_HOTPLUG_INT 0x008
+
+#define VC4_HDMI_HOTPLUG 0x00c
+# define VC4_HDMI_HOTPLUG_CONNECTED (1 << 0)
+
+#define VC4_HDMI_RAM_PACKET_CONFIG 0x0a0
+# define VC4_HDMI_RAM_PACKET_ENABLE (1 << 16)
+
+#define VC4_HDMI_HORZA 0x0c4
+# define VC4_HDMI_HORZA_VPOS (1 << 14)
+# define VC4_HDMI_HORZA_HPOS (1 << 13)
+/* Horizontal active pixels (hdisplay). */
+# define VC4_HDMI_HORZA_HAP_MASK VC4_MASK(12, 0)
+# define VC4_HDMI_HORZA_HAP_SHIFT 0
+
+#define VC4_HDMI_HORZB 0x0c8
+/* Horizontal pack porch (htotal - hsync_end). */
+# define VC4_HDMI_HORZB_HBP_MASK VC4_MASK(29, 20)
+# define VC4_HDMI_HORZB_HBP_SHIFT 20
+/* Horizontal sync pulse (hsync_end - hsync_start). */
+# define VC4_HDMI_HORZB_HSP_MASK VC4_MASK(19, 10)
+# define VC4_HDMI_HORZB_HSP_SHIFT 10
+/* Horizontal front porch (hsync_start - hdisplay). */
+# define VC4_HDMI_HORZB_HFP_MASK VC4_MASK(9, 0)
+# define VC4_HDMI_HORZB_HFP_SHIFT 0
+
+#define VC4_HDMI_FIFO_CTL 0x05c
+# define VC4_HDMI_FIFO_CTL_RECENTER_DONE (1 << 14)
+# define VC4_HDMI_FIFO_CTL_USE_EMPTY (1 << 13)
+# define VC4_HDMI_FIFO_CTL_ON_VB (1 << 7)
+# define VC4_HDMI_FIFO_CTL_RECENTER (1 << 6)
+# define VC4_HDMI_FIFO_CTL_FIFO_RESET (1 << 5)
+# define VC4_HDMI_FIFO_CTL_USE_PLL_LOCK (1 << 4)
+# define VC4_HDMI_FIFO_CTL_INV_CLK_XFR (1 << 3)
+# define VC4_HDMI_FIFO_CTL_CAPTURE_PTR (1 << 2)
+# define VC4_HDMI_FIFO_CTL_USE_FULL (1 << 1)
+# define VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N (1 << 0)
+# define VC4_HDMI_FIFO_VALID_WRITE_MASK 0xefff
+
+#define VC4_HDMI_SCHEDULER_CONTROL 0x0c0
+# define VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT (1 << 15)
+# define VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS (1 << 5)
+# define VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT (1 << 3)
+# define VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE (1 << 1)
+# define VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI (1 << 0)
+
+#define VC4_HDMI_VERTA0 0x0cc
+#define VC4_HDMI_VERTA1 0x0d4
+/* Vertical sync pulse (vsync_end - vsync_start). */
+# define VC4_HDMI_VERTA_VSP_MASK VC4_MASK(24, 20)
+# define VC4_HDMI_VERTA_VSP_SHIFT 20
+/* Vertical front porch (vsync_start - vdisplay). */
+# define VC4_HDMI_VERTA_VFP_MASK VC4_MASK(19, 13)
+# define VC4_HDMI_VERTA_VFP_SHIFT 13
+/* Vertical active lines (vdisplay). */
+# define VC4_HDMI_VERTA_VAL_MASK VC4_MASK(12, 0)
+# define VC4_HDMI_VERTA_VAL_SHIFT 0
+
+#define VC4_HDMI_VERTB0 0x0d0
+#define VC4_HDMI_VERTB1 0x0d8
+/* Vertical sync pulse offset (for interlaced) */
+# define VC4_HDMI_VERTB_VSPO_MASK VC4_MASK(21, 9)
+# define VC4_HDMI_VERTB_VSPO_SHIFT 9
+/* Vertical pack porch (vtotal - vsync_end). */
+# define VC4_HDMI_VERTB_VBP_MASK VC4_MASK(8, 0)
+# define VC4_HDMI_VERTB_VBP_SHIFT 0
+
+#define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
+
+#define VC4_HD_M_CTL 0x00c
+# define VC4_HD_M_SW_RST (1 << 2)
+# define VC4_HD_M_ENABLE (1 << 0)
+
+#define VC4_HD_MAI_CTL 0x014
+
+#define VC4_HD_VID_CTL 0x038
+# define VC4_HD_VID_CTL_ENABLE (1 << 31)
+# define VC4_HD_VID_CTL_UNDERFLOW_ENABLE (1 << 30)
+# define VC4_HD_VID_CTL_FRAME_COUNTER_RESET (1 << 29)
+# define VC4_HD_VID_CTL_VSYNC_LOW (1 << 28)
+# define VC4_HD_VID_CTL_HSYNC_LOW (1 << 27)
+
+#define VC4_HD_CSC_CTL 0x040
+# define VC4_HD_CSC_CTL_ORDER_MASK VC4_MASK(7, 5)
+# define VC4_HD_CSC_CTL_ORDER_SHIFT 5
+# define VC4_HD_CSC_CTL_ORDER_RGB 0
+# define VC4_HD_CSC_CTL_ORDER_BGR 1
+# define VC4_HD_CSC_CTL_ORDER_BRG 2
+# define VC4_HD_CSC_CTL_ORDER_GRB 3
+# define VC4_HD_CSC_CTL_ORDER_GBR 4
+# define VC4_HD_CSC_CTL_ORDER_RBG 5
+# define VC4_HD_CSC_CTL_PADMSB (1 << 4)
+# define VC4_HD_CSC_CTL_MODE_MASK VC4_MASK(3, 2)
+# define VC4_HD_CSC_CTL_MODE_SHIFT 2
+# define VC4_HD_CSC_CTL_MODE_RGB_TO_SD_YPRPB 0
+# define VC4_HD_CSC_CTL_MODE_RGB_TO_HD_YPRPB 1
+# define VC4_HD_CSC_CTL_MODE_CUSTOM 2
+# define VC4_HD_CSC_CTL_RGB2YCC (1 << 1)
+# define VC4_HD_CSC_CTL_ENABLE (1 << 0)
+
+#define VC4_HD_FRAME_COUNT 0x068
+
+/* HVS display list information. */
+#define HVS_BOOTLOADER_DLIST_END 32
+
+enum hvs_pixel_format {
+ /* 8bpp */
+ HVS_PIXEL_FORMAT_RGB332 = 0,
+ /* 16bpp */
+ HVS_PIXEL_FORMAT_RGBA4444 = 1,
+ HVS_PIXEL_FORMAT_RGB555 = 2,
+ HVS_PIXEL_FORMAT_RGBA5551 = 3,
+ HVS_PIXEL_FORMAT_RGB565 = 4,
+ /* 24bpp */
+ HVS_PIXEL_FORMAT_RGB888 = 5,
+ HVS_PIXEL_FORMAT_RGBA6666 = 6,
+ /* 32bpp */
+ HVS_PIXEL_FORMAT_RGBA8888 = 7
+};
+
+/* Note: the LSB is the rightmost character shown. Only valid for
+ * HVS_PIXEL_FORMAT_RGB8888, not RGB888.
+ */
+#define HVS_PIXEL_ORDER_RGBA 0
+#define HVS_PIXEL_ORDER_BGRA 1
+#define HVS_PIXEL_ORDER_ARGB 2
+#define HVS_PIXEL_ORDER_ABGR 3
+
+#define HVS_PIXEL_ORDER_XBRG 0
+#define HVS_PIXEL_ORDER_XRBG 1
+#define HVS_PIXEL_ORDER_XRGB 2
+#define HVS_PIXEL_ORDER_XBGR 3
+
+#define HVS_PIXEL_ORDER_XYCBCR 0
+#define HVS_PIXEL_ORDER_XYCRCB 1
+#define HVS_PIXEL_ORDER_YXCBCR 2
+#define HVS_PIXEL_ORDER_YXCRCB 3
+
+#define SCALER_CTL0_END (1 << 31)
+#define SCALER_CTL0_VALID (1 << 30)
+
+#define SCALER_CTL0_SIZE_MASK VC4_MASK(29, 24)
+#define SCALER_CTL0_SIZE_SHIFT 24
+
+#define SCALER_CTL0_HFLIP (1 << 16)
+#define SCALER_CTL0_VFLIP (1 << 15)
+
+#define SCALER_CTL0_ORDER_MASK VC4_MASK(14, 13)
+#define SCALER_CTL0_ORDER_SHIFT 13
+
+/* Set to indicate no scaling. */
+#define SCALER_CTL0_UNITY (1 << 4)
+
+#define SCALER_CTL0_PIXEL_FORMAT_MASK VC4_MASK(3, 0)
+#define SCALER_CTL0_PIXEL_FORMAT_SHIFT 0
+
+#define SCALER_POS0_FIXED_ALPHA_MASK VC4_MASK(31, 24)
+#define SCALER_POS0_FIXED_ALPHA_SHIFT 24
+
+#define SCALER_POS0_START_Y_MASK VC4_MASK(23, 12)
+#define SCALER_POS0_START_Y_SHIFT 12
+
+#define SCALER_POS0_START_X_MASK VC4_MASK(11, 0)
+#define SCALER_POS0_START_X_SHIFT 0
+
+#define SCALER_POS2_ALPHA_MODE_MASK VC4_MASK(31, 30)
+#define SCALER_POS2_ALPHA_MODE_SHIFT 30
+#define SCALER_POS2_ALPHA_MODE_PIPELINE 0
+#define SCALER_POS2_ALPHA_MODE_FIXED 1
+#define SCALER_POS2_ALPHA_MODE_FIXED_NONZERO 2
+#define SCALER_POS2_ALPHA_MODE_FIXED_OVER_0x07 3
+
+#define SCALER_POS2_HEIGHT_MASK VC4_MASK(27, 16)
+#define SCALER_POS2_HEIGHT_SHIFT 16
+
+#define SCALER_POS2_WIDTH_MASK VC4_MASK(11, 0)
+#define SCALER_POS2_WIDTH_SHIFT 0
+
+#define SCALER_SRC_PITCH_MASK VC4_MASK(15, 0)
+#define SCALER_SRC_PITCH_SHIFT 0
--
2.1.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
