On Wed, 12 Aug 2015, Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> If the sink support eDP, read the eDP revision from it's DPCD.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 30 +++++++++++++++++++++++++++++-
> include/drm/drm_dp_helper.h | 1 +
> 2 files changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 1fe181525604..c711b690508b 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -295,7 +295,7 @@ EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
> */
> int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
> {
> - u8 values[7];
> + u8 values[16], value;
> int err;
>
> memset(link, 0, sizeof(*link));
> @@ -323,6 +323,34 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
> if (values[6] & DP_SET_ANSI_8B10B)
> link->capabilities |= DP_LINK_CAP_ANSI_8B10B;
>
> + if (values[13] & DP_ALTERNATE_SCRAMBLER_RESET_CAP) {
That's not indicative of eDP, that's indicative of edp && alternate
scrambler support. DPCD_DISPLAY_CONTROL_CAPABLE bit is a better match:
"To allow Source devices to easily identify panels that use DPCD
Addresses 00700h through 007FFh, the DPCD_DISPLAY_CONTROL_CAPABLE bit in
the eDP_CONFIGURATION_CAP register (DPCD Address 0000Dh, bit 3) has been
assigned (eDP v1.2 (and higher)) to indicate this capability, as
described in Table 3-3."
Also, I'd really appreciate using the macros for DPCD offsets. I do not
remember these offsets by heart, and we've defined the macros according
to the spec so it would be faster to look things up there.
> + err = drm_dp_dpcd_readb(aux, DP_EDP_DPCD_REV, &value);
> + if (err < 0)
> + return err;
> +
> + switch (value) {
> + case DP_EDP_11:
> + link->edp = 0x11;
I'm really not sure if this is a good idea, since DP_EDP_11 ==
0. Essentially you're promoting to use the magic values for the version
checking in code. Sure, we've done that with the DPCD version, but now
link->revision is directly from DPCD, and this would not be.
BR,
Jani.
> + break;
> +
> + case DP_EDP_12:
> + link->edp = 0x12;
> + break;
> +
> + case DP_EDP_13:
> + link->edp = 0x13;
> + break;
> +
> + case DP_EDP_14:
> + link->edp = 0x14;
> + break;
> +
> + default:
> + DRM_ERROR("unsupported eDP version: %02x\n", value);
> + break;
> + }
> + }
> +
> return 0;
> }
> EXPORT_SYMBOL(drm_dp_link_probe);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 9e70ea8b907d..f9e7f484a225 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -749,6 +749,7 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>
> struct drm_dp_link {
> unsigned char revision;
> + unsigned char edp;
> unsigned int rate;
> unsigned int num_lanes;
> unsigned long capabilities;
> --
> 2.4.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
