This change is to update DSI register definition changes
introduced by the following change:
rnndb/dsi: Add more bits for DSI PHY
More registers and bit fields are added for PHY timings
and bitclk source selection.
Signed-off-by: Hai Li <hali@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/dsi.xml.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 0af0981..41c6376 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -440,6 +440,9 @@ static inline uint32_t DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(enum dsi_lane_swap val)
#define REG_DSI_PHY_RESET 0x00000128
#define DSI_PHY_RESET_RESET 0x00000001
+#define REG_DSI_T_CLK_PRE_EXTEND 0x0000017c
+#define DSI_T_CLK_PRE_EXTEND_INC_BY_2_BYTECLK 0x00000001
+
#define REG_DSI_RDBK_DATA_CTRL 0x000001d0
#define DSI_RDBK_DATA_CTRL_COUNT__MASK 0x00ff0000
#define DSI_RDBK_DATA_CTRL_COUNT__SHIFT 16
@@ -835,6 +838,7 @@ static inline uint32_t DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
#define REG_DSI_28nm_PHY_BIST_CTRL_5 0x000001c8
#define REG_DSI_28nm_PHY_GLBL_TEST_CTRL 0x000001d4
+#define DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL 0x00000001
#define REG_DSI_28nm_PHY_LDO_CNTRL 0x000001dc
@@ -1161,6 +1165,7 @@ static inline uint32_t DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
#define REG_DSI_20nm_PHY_BIST_CTRL_5 0x000001c8
#define REG_DSI_20nm_PHY_GLBL_TEST_CTRL 0x000001d4
+#define DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL 0x00000001
#define REG_DSI_20nm_PHY_LDO_CNTRL 0x000001dc
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
