Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7793.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c50c5f65388a..2072f55a524a 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -140,6 +140,36 @@
status = "disabled";
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7793";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+ <&mstp7_clks R8A7793_CLK_DU1>,
+ <&mstp7_clks R8A7793_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.3.6
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
