[PATCH v7 3/4] arm/dts/ls1021a: Add DCU dts node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add DCU node, DCU is a display controller of Freescale
named 2D-ACE.

Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx>
Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jianwei Wang <jianwei.wang@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt    | 49 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 arch/arm/boot/dts/ls1021a.dtsi                     | 10 +++++
 3 files changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt

diff --git a/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt b/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt
new file mode 100644
index 0000000..d65631d
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt
@@ -0,0 +1,49 @@
+Device Tree bindings for Freescale DCU DRM Driver
+
+Required properties:
+- compatible:           Should be one of
+	* "fsl,ls1021a-dcu".
+	* "fsl,vf610-dcu".
+- reg:                  Address and length of the register set for dcu.
+- clocks:               From common clock binding: handle to dcu clock.
+- clock-names:          From common clock binding: Shall be "dcu".
+- display:              The phandle to display node.
+
+Required properties:
+- bits-per-pixel:       <16> for RGB565,
+			<24> for RGB888,
+			<32> for RGB8888.
+
+Required timing node for dispplay sub-node:
+- display-timings:      Refer to binding doc display-timing.txt for details.
+
+Examples:
+dcu: dcu@2ce0000 {
+	compatible = "fsl,ls1021a-dcu";
+	reg = <0x0 0x2ce0000 0x0 0x10000>;
+	clocks = <&platform_clk 0>;
+	clock-names = "dcu";
+	big-endian;
+	display = <&display>;
+
+	display: display@0 {
+		bits-per-pixel = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: nl4827hc19 {
+				clock-frequency = <10870000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <1>;
+				vfront-porch = <1>;
+				hsync-len = <41>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index e191ded..fffb8c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3410,6 +3410,7 @@ M:	Alison Wang <alison.wang@xxxxxxxxxxxxx>
 L:	dri-devel@xxxxxxxxxxxxxxxxxxxxx
 S:	Supported
 F:	drivers/gpu/drm/fsl-dcu/
+F:      Documentation/devicetree/bindings/drm/fsl-dcu/
 F:      Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt
 
 DRM DRIVERS FOR NVIDIA TEGRA
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..6d6e3e2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -383,6 +383,16 @@
 				 <&platform_clk 1>;
 		};
 
+		dcu: dcu@2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 0>;
+			clock-names = "dcu";
+			big-endian;
+			status = "disabled";
+		};
+
 		mdio0: mdio@2d24000 {
 			compatible = "gianfar";
 			device_type = "mdio";
-- 
2.1.0.27.g96db324

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux