->reset() currently only accesses HDMI core registers, and yet it is located in hdmi_phy*. Since no PHY registers are being accessed during ->reset(), it would be better to bring that function in hdmi core module where HDMI core registers are usually being accessed. This will also help for msm8x94 for which no PHY registers accesses are done (->phy_init == NULL) but the HDMI PHY reset from HDMI core still needs to be done. Note: SW_RESET_PLL bit is not written in hdmi_phy_8x60_reset(); this write should not affect anything if the corresponding field is not writable. Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/hdmi/hdmi.h | 1 - drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 51 ++++++++++++++++++++++++++- drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c | 52 ---------------------------- drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 32 ----------------- drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c | 57 ------------------------------- 5 files changed, 50 insertions(+), 143 deletions(-) <snip> -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
