After the commit abc0b1447d4974963548777a5ba4a4457c82c426
("drm: Perform basic sanity checks on probed modes"), proper
clock-frequency becomes mandatory for validating the mode of panel.
The display does not work if there is no mode validated. Also, this
clock-frequency must be set appropriately for getting required frame
rate.
Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 0b99068..75aba40 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -181,7 +181,7 @@
display-timings {
timing-0 {
- clock-frequency = <0>;
+ clock-frequency = <4600000>;
hactive = <320>;
vactive = <320>;
hfront-porch = <1>;
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
