[PATCH v6 10/15] drm/exynos: dsi: make use of driver data for static values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Exynos MIPI DSI driver uses some static values such as address offsets,
register setting values, and etc. This patch makes the driver get those
values from the driver data.

Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
---
Changes before:
- Refer https://patchwork.kernel.org/patch/6191731
Changes for v6:
- None

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 196 +++++++++++++++++++++++---------
 1 file changed, 145 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 70367d0..0b468d7 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -34,38 +34,6 @@
 /* returns true iff both arguments logically differs */
 #define NEQV(a, b) (!(a) ^ !(b))

-#define DSIM_STATUS_REG		0x0	/* Status register */
-#define DSIM_SWRST_REG		0x4	/* Software reset register */
-#define DSIM_CLKCTRL_REG	0x8	/* Clock control register */
-#define DSIM_TIMEOUT_REG	0xc	/* Time out register */
-#define DSIM_CONFIG_REG		0x10	/* Configuration register */
-#define DSIM_ESCMODE_REG	0x14	/* Escape mode register */
-
-/* Main display image resolution register */
-#define DSIM_MDRESOL_REG	0x18
-#define DSIM_MVPORCH_REG	0x1c	/* Main display Vporch register */
-#define DSIM_MHPORCH_REG	0x20	/* Main display Hporch register */
-#define DSIM_MSYNC_REG		0x24	/* Main display sync area register */
-
-/* Sub display image resolution register */
-#define DSIM_SDRESOL_REG	0x28
-#define DSIM_INTSRC_REG		0x2c	/* Interrupt source register */
-#define DSIM_INTMSK_REG		0x30	/* Interrupt mask register */
-#define DSIM_PKTHDR_REG		0x34	/* Packet Header FIFO register */
-#define DSIM_PAYLOAD_REG	0x38	/* Payload FIFO register */
-#define DSIM_RXFIFO_REG		0x3c	/* Read FIFO register */
-#define DSIM_FIFOTHLD_REG	0x40	/* FIFO threshold level register */
-#define DSIM_FIFOCTRL_REG	0x44	/* FIFO status and control register */
-
-/* FIFO memory AC characteristic register */
-#define DSIM_PLLCTRL_REG	0x4c	/* PLL control register */
-#define DSIM_PHYACCHR_REG	0x54	/* D-PHY AC characteristic register */
-#define DSIM_PHYACCHR1_REG	0x58	/* D-PHY AC characteristic register1 */
-#define DSIM_PHYCTRL_REG	0x5c
-#define DSIM_PHYTIMING_REG	0x64
-#define DSIM_PHYTIMING1_REG	0x68
-#define DSIM_PHYTIMING2_REG	0x6c
-
 /* DSIM_STATUS */
 #define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
 #define DSIM_STOP_STATE_CLK		(1 << 8)
@@ -129,8 +97,8 @@

 /* DSIM_MDRESOL */
 #define DSIM_MAIN_STAND_BY		(1 << 31)
-#define DSIM_MAIN_VRESOL(x)		(((x) & 0x7ff) << 16)
-#define DSIM_MAIN_HRESOL(x)		(((x) & 0X7ff) << 0)
+#define DSIM_MAIN_VRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 16)
+#define DSIM_MAIN_HRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 0)

 /* DSIM_MVPORCH */
 #define DSIM_CMD_ALLOW(x)		((x) << 28)
@@ -237,8 +205,11 @@

 #define OLD_SCLK_MIPI_CLK_NAME "pll_clk"

-#define DSI_WRITE(dsi, reg, val)	writel((val), (dsi)->reg_base + (reg))
-#define DSI_READ(dsi, reg)		readl((dsi)->reg_base + (reg))
+#define REG_ADDR(dsi, reg_idx)		((dsi)->reg_base + \
+					dsi->driver_data->reg_ofs[(reg_idx)])
+#define DSI_WRITE(dsi, reg_idx, val)	writel((val), \
+					REG_ADDR((dsi), (reg_idx)))
+#define DSI_READ(dsi, reg_idx)		readl(REG_ADDR((dsi), (reg_idx)))

 enum exynos_dsi_transfer_type {
 	EXYNOS_DSI_TX,
@@ -268,10 +239,15 @@ struct exynos_dsi_transfer {
 #define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)

 struct exynos_dsi_driver_data {
+	unsigned int *reg_ofs;
 	unsigned int plltmr_reg;
-
 	unsigned int has_freqband:1;
 	unsigned int has_clklane_stop:1;
+	unsigned int num_clks;
+	unsigned int max_freq;
+	unsigned int wait_for_reset;
+	unsigned int num_bits_resol;
+	unsigned int *reg_values;
 };

 struct exynos_dsi {
@@ -316,25 +292,133 @@ static inline struct exynos_dsi *display_to_dsi(struct exynos_drm_display *d)
 	return container_of(d, struct exynos_dsi, display);
 }

+enum reg_idx {
+	DSIM_STATUS_REG,	/* Status register */
+	DSIM_SWRST_REG,		/* Software reset register */
+	DSIM_CLKCTRL_REG,	/* Clock control register */
+	DSIM_TIMEOUT_REG,	/* Time out register */
+	DSIM_CONFIG_REG,	/* Configuration register */
+	DSIM_ESCMODE_REG,	/* Escape mode register */
+	DSIM_MDRESOL_REG,
+	DSIM_MVPORCH_REG,	/* Main display Vporch register */
+	DSIM_MHPORCH_REG,	/* Main display Hporch register */
+	DSIM_MSYNC_REG,		/* Main display sync area register */
+	DSIM_INTSRC_REG,	/* Interrupt source register */
+	DSIM_INTMSK_REG,	/* Interrupt mask register */
+	DSIM_PKTHDR_REG,	/* Packet Header FIFO register */
+	DSIM_PAYLOAD_REG,	/* Payload FIFO register */
+	DSIM_RXFIFO_REG,	/* Read FIFO register */
+	DSIM_FIFOCTRL_REG,	/* FIFO status and control register */
+	DSIM_PLLCTRL_REG,	/* PLL control register */
+	DSIM_PHYCTRL_REG,
+	DSIM_PHYTIMING_REG,
+	DSIM_PHYTIMING1_REG,
+	DSIM_PHYTIMING2_REG,
+	NUM_REGS
+};
+static unsigned int exynos_reg_ofs[] = {
+	[DSIM_STATUS_REG] =  0x00,
+	[DSIM_SWRST_REG] =  0x04,
+	[DSIM_CLKCTRL_REG] =  0x08,
+	[DSIM_TIMEOUT_REG] =  0x0c,
+	[DSIM_CONFIG_REG] =  0x10,
+	[DSIM_ESCMODE_REG] =  0x14,
+	[DSIM_MDRESOL_REG] =  0x18,
+	[DSIM_MVPORCH_REG] =  0x1c,
+	[DSIM_MHPORCH_REG] =  0x20,
+	[DSIM_MSYNC_REG] =  0x24,
+	[DSIM_INTSRC_REG] =  0x2c,
+	[DSIM_INTMSK_REG] =  0x30,
+	[DSIM_PKTHDR_REG] =  0x34,
+	[DSIM_PAYLOAD_REG] =  0x38,
+	[DSIM_RXFIFO_REG] =  0x3c,
+	[DSIM_FIFOCTRL_REG] =  0x44,
+	[DSIM_PLLCTRL_REG] =  0x4c,
+	[DSIM_PHYCTRL_REG] =  0x5c,
+	[DSIM_PHYTIMING_REG] =  0x64,
+	[DSIM_PHYTIMING1_REG] =  0x68,
+	[DSIM_PHYTIMING2_REG] =  0x6c,
+};
+
+enum reg_value_idx {
+	RESET_TYPE,
+	PLL_TIMER,
+	STOP_STATE_CNT,
+	PHYCTRL_ULPS_EXIT,
+	PHYCTRL_VREG_LP,
+	PHYCTRL_SLEW_UP,
+	PHYTIMING_LPX,
+	PHYTIMING_HS_EXIT,
+	PHYTIMING_CLK_PREPARE,
+	PHYTIMING_CLK_ZERO,
+	PHYTIMING_CLK_POST,
+	PHYTIMING_CLK_TRAIL,
+	PHYTIMING_HS_PREPARE,
+	PHYTIMING_HS_ZERO,
+	PHYTIMING_HS_TRAIL
+};
+
+static unsigned int reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
 static struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x50,
 	.has_freqband = 1,
 	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
 };

 static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x50,
 	.has_freqband = 1,
 	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
 };

 static struct exynos_dsi_driver_data exynos4415_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x58,
 	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
 };

 static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x58,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
 };

 static struct of_device_id exynos_dsi_of_match[] = {
@@ -371,7 +455,7 @@ static void exynos_dsi_reset(struct exynos_dsi *dsi)
 	struct exynos_dsi_driver_data *driver_data = dsi->driver_data;

 	reinit_completion(&dsi->completed);
-	DSI_WRITE(dsi, DSIM_SWRST_REG, DSIM_SWRST);
+	DSI_WRITE(dsi, DSIM_SWRST_REG, driver_data->reg_values[RESET_TYPE]);
 }

 #ifndef MHZ
@@ -405,7 +489,8 @@ static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,

 			tmp = (u64)_m * fin;
 			do_div(tmp, _p);
-			if (tmp < 500 * MHZ || tmp > 1000 * MHZ)
+			if (tmp < 500 * MHZ ||
+					tmp > driver_data->max_freq * MHZ)
 				continue;

 			tmp = (u64)_m * fin;
@@ -450,7 +535,8 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
 	}
 	dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);

-	writel(500, dsi->reg_base + driver_data->plltmr_reg);
+	writel(driver_data->reg_values[PLL_TIMER],
+			dsi->reg_base + driver_data->plltmr_reg);

 	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);

@@ -528,13 +614,15 @@ static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
 static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
 {
 	struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+	unsigned int *reg_values = driver_data->reg_values;
 	u32 reg;

 	if (driver_data->has_freqband)
 		return;

 	/* B D-PHY: D-PHY Master & Slave Analog Block control */
-	reg = DSIM_PHYCTRL_ULPS_EXIT(0x0af);
+	reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
+		reg_values[PHYCTRL_SLEW_UP];
 	DSI_WRITE(dsi, DSIM_PHYCTRL_REG, reg);

 	/*
@@ -542,7 +630,7 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
 	 * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
 	 *	burst
 	 */
-	reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
+	reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
 	DSI_WRITE(dsi, DSIM_PHYTIMING_REG, reg);

 	/*
@@ -558,10 +646,11 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
 	 * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
 	 *	the last payload clock bit of a HS transmission burst
 	 */
-	reg = DSIM_PHYTIMING1_CLK_PREPARE(0x07) |
-			DSIM_PHYTIMING1_CLK_ZERO(0x27) |
-			DSIM_PHYTIMING1_CLK_POST(0x0d) |
-			DSIM_PHYTIMING1_CLK_TRAIL(0x08);
+	reg = reg_values[PHYTIMING_CLK_PREPARE] |
+		reg_values[PHYTIMING_CLK_ZERO] |
+		reg_values[PHYTIMING_CLK_POST] |
+		reg_values[PHYTIMING_CLK_TRAIL];
+
 	DSI_WRITE(dsi, DSIM_PHYTIMING1_REG, reg);

 	/*
@@ -573,8 +662,8 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
 	 * T HS-TRAIL: Time that the transmitter drives the flipped differential
 	 *	state after last payload data bit of a HS transmission burst
 	 */
-	reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
-			DSIM_PHYTIMING2_HS_TRAIL(0x0b);
+	reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
+		reg_values[PHYTIMING_HS_TRAIL];
 	DSI_WRITE(dsi, DSIM_PHYTIMING2_REG, reg);
 }

@@ -705,7 +794,7 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)

 	reg = DSI_READ(dsi, DSIM_ESCMODE_REG);
 	reg &= ~DSIM_STOP_STATE_CNT_MASK;
-	reg |= DSIM_STOP_STATE_CNT(0xf);
+	reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
 	DSI_WRITE(dsi, DSIM_ESCMODE_REG, reg);

 	reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
@@ -717,6 +806,7 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
 static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
 {
 	struct videomode *vm = &dsi->vm;
+	unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
 	u32 reg;

 	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
@@ -733,8 +823,9 @@ static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
 			| DSIM_MAIN_HSA(vm->hsync_len);
 		DSI_WRITE(dsi, DSIM_MSYNC_REG, reg);
 	}
+	reg =  DSIM_MAIN_HRESOL(vm->hactive, num_bits_resol) |
+		DSIM_MAIN_VRESOL(vm->vactive, num_bits_resol);

-	reg = DSIM_MAIN_HRESOL(vm->hactive) | DSIM_MAIN_VRESOL(vm->vactive);
 	DSI_WRITE(dsi, DSIM_MDRESOL_REG, reg);

 	dev_dbg(dsi->dev, "LCD size = %dx%d\n", vm->hactive, vm->vactive);
@@ -1141,10 +1232,13 @@ static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)

 static int exynos_dsi_init(struct exynos_dsi *dsi)
 {
+	struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+
 	exynos_dsi_reset(dsi);
 	exynos_dsi_enable_irq(dsi);
 	exynos_dsi_enable_clock(dsi);
-	exynos_dsi_wait_for_reset(dsi);
+	if (driver_data->wait_for_reset)
+		exynos_dsi_wait_for_reset(dsi);
 	exynos_dsi_set_phy_ctrl(dsi);
 	exynos_dsi_init_link(dsi);

--
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux