On 05/06/15 00:02, Paul Walmsley wrote: > Hi folks > > just a brief comment on this one: > > On Thu, 30 Apr 2015, Boris Brezillon wrote: > >> Clock rates are stored in an unsigned long field, but ->round_rate() >> (which returns a rounded rate from a requested one) returns a long >> value (errors are reported using negative error codes), which can lead >> to long overflow if the clock rate exceed 2Ghz. >> >> Change ->round_rate() prototype to return 0 or an error code, and pass the >> requested rate as a pointer so that it can be adjusted depending on >> hardware capabilities. > > ... > >> diff --git a/Documentation/clk.txt b/Documentation/clk.txt >> index 0e4f90a..fca8b7a 100644 >> --- a/Documentation/clk.txt >> +++ b/Documentation/clk.txt >> @@ -68,8 +68,8 @@ the operations defined in clk.h: >> int (*is_enabled)(struct clk_hw *hw); >> unsigned long (*recalc_rate)(struct clk_hw *hw, >> unsigned long parent_rate); >> - long (*round_rate)(struct clk_hw *hw, >> - unsigned long rate, >> + int (*round_rate)(struct clk_hw *hw, >> + unsigned long *rate, >> unsigned long *parent_rate); >> long (*determine_rate)(struct clk_hw *hw, >> unsigned long rate, > > I'd suggest that we should probably go straight to 64-bit rates. There > are already plenty of clock sources that can generate rates higher than > 4GiHz. An alternative would be to introduce to a frequency "base" the default could be Hz (for backwards compatibility), but for CPUs we probably only care about MHz (or may be kHz) and so 32-bits would still suffice. Even if CPUs cared about Hz they could still use Hz, but in that case they probably don't care about GHz. Obviously, we don't want to break DT compatibility but may be the frequency base could be defined in DT and if it is missing then Hz is assumed. Just a thought ... Jon _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
