Re: [PATCH v2] drm/msm/hdmi: Use pinctrl in HDMI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ivan,

>
> Hi Stephane,
>
> On Mon, 2015-06-01 at 16:28 -0400, Stephane Viau wrote:
>> Some targets (eg: msm8994) use the pinctrl framework to configure
>> interface pins. This change adds support for initialization and
>> pinctrl active/sleep state control for the HDMI driver.
>>
>> Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
>> ---
>> v2:
>> - Add devicetree binding documentation for pinctrl property  [Ivan]
>> - Use pinctrl framework's PINCTRL_STATE_DEFAULT/SLEEP states [Ivan]
>>
>
> <snip>
>
>>
>>  static int hdmi_bind(struct device *dev, struct device *master, void
>> *data)
>> @@ -365,6 +379,7 @@ static int hdmi_bind(struct device *dev, struct
>> device *master, void *data)
>>  #ifdef CONFIG_OF
>>         struct device_node *of_node = dev->of_node;
>>         const struct of_device_id *match;
>> +       struct pinctrl *pinctrl;
>>
>>         match = of_match_node(dt_match, of_node);
>>         if (match && match->data) {
>> @@ -383,6 +398,18 @@ static int hdmi_bind(struct device *dev, struct
>> device *master, void *data)
>>         hdmi_cfg->mux_sel_gpio  = get_gpio(dev, of_node,
>> "qcom,hdmi-tx-mux-sel");
>>         hdmi_cfg->mux_lpm_gpio  = get_gpio(dev, of_node,
>> "qcom,hdmi-tx-mux-lpm");
>>
>> +       /* not all targets have pinctrl, do not fail in case of error:
>> */
>> +       pinctrl = devm_pinctrl_get(dev);
>
> Probably I have to be more explicit. Why not using pins binding handled in
> driver
> really_probe()? I have to admit that I am not familiar with DRM subsystem.

This would work, indeed, for default/sleep/idle states.

I actually had in mind that we'd need to keep track of HDMI pinctrl states
because we may need to add a couple more in the near future in order to
independently enable/disable certain parts of the HDMI controller (eg:
HPD, DDC, CEC..).

Each of this HW sub-sections of the controller are driven by a different
"pin" in the downstream driver... But since this is nowhere close to being
upstream-ed yet, I'll go ahead with your idea of using the common pins
binding (v3 to follow).

Thanks,
Stephane.

>
> Regards,
> Ivan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux