Hi,
On 2 June 2015 at 12:25, Jindal, Sonika <sonika.jindal@xxxxxxxxx> wrote:
> On 6/2/2015 1:22 AM, Kausal Malladi wrote:
>> struct drm_intel_gamma {
>> __u32 flags;
>> (The flag variable will indicate if the property to be set/get
>> is Gamma or DeGamma)
>> __u32 gamma_level;
>> (The gamma_level variable indicates if the Gamma correction is to
>> be
>> applied on Pipe/plane)
>> __u32 gamma_precision;
>> (The Gamma precision indicates the Gamma mode to be applied)
>>
>> Supported precisions are -
>> #define I915_GAMMA_PRECISION_UNKNOWN 0
>> #define I915_GAMMA_PRECISION_CURRENT 0xFFFFFFFF
>> #define I915_GAMMA_PRECISION_LEGACY (1 << 0)
>> #define I915_GAMMA_PRECISION_10BIT (1 << 1)
>> #define I915_GAMMA_PRECISION_12BIT (1 << 2)
>> #define I915_GAMMA_PRECISION_14BIT (1 << 3)
>> #define I915_GAMMA_PRECISION_16BIT (1 << 4)
>>
>> __u32 num_samples;
>> (The num_samples indicates the number of Gamma correction
>> coefficients)
>> __u32 reserved;
>> __u64 gamma_ptr;
>> (Points to the raw Gamma color correction values)
>> };
Please use the atomic interface and blob properties for this instead.
A user-created blob property can replace the contents of gamma_ptr,
you can replace gamma_level by choosing whether you apply the
properties to a CRTC (pipe) or plane, and then you just need separate
properties for precision and num_samples.
Cheers,
Daniel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
