These headers define the atombios table structure and
driver interface.
Acked-by: Christian König <christian.koenig@xxxxxxx>
Acked-by: Jammy Zhou <Jammy.Zhou@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/ObjectID.h | 736 +++
drivers/gpu/drm/amd/amdgpu/atombios.h | 8555 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/amd/amdgpu/pptable.h | 698 +++
3 files changed, 9989 insertions(+)
create mode 100644 drivers/gpu/drm/amd/amdgpu/ObjectID.h
create mode 100644 drivers/gpu/drm/amd/amdgpu/atombios.h
create mode 100644 drivers/gpu/drm/amd/amdgpu/pptable.h
diff --git a/drivers/gpu/drm/amd/amdgpu/ObjectID.h b/drivers/gpu/drm/amd/amdgpu/ObjectID.h
new file mode 100644
index 0000000..0619269
--- /dev/null
+++ b/drivers/gpu/drm/amd/amdgpu/ObjectID.h
@@ -0,0 +1,736 @@
+/*
+* Copyright 2006-2007 Advanced Micro Devices, Inc.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a
+* copy of this software and associated documentation files (the "Software"),
+* to deal in the Software without restriction, including without limitation
+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
+* and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+* OTHER DEALINGS IN THE SOFTWARE.
+*/
+/* based on stg/asic_reg/drivers/inc/asic_reg/ObjectID.h ver 23 */
+
+#ifndef _OBJECTID_H
+#define _OBJECTID_H
+
+#if defined(_X86_)
+#pragma pack(1)
+#endif
+
+/****************************************************/
+/* Graphics Object Type Definition */
+/****************************************************/
+#define GRAPH_OBJECT_TYPE_NONE 0x0
+#define GRAPH_OBJECT_TYPE_GPU 0x1
+#define GRAPH_OBJECT_TYPE_ENCODER 0x2
+#define GRAPH_OBJECT_TYPE_CONNECTOR 0x3
+#define GRAPH_OBJECT_TYPE_ROUTER 0x4
+/* deleted */
+#define GRAPH_OBJECT_TYPE_DISPLAY_PATH 0x6
+#define GRAPH_OBJECT_TYPE_GENERIC 0x7
+
+/****************************************************/
+/* Encoder Object ID Definition */
+/****************************************************/
+#define ENCODER_OBJECT_ID_NONE 0x00
+
+/* Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_INTERNAL_LVDS 0x01
+#define ENCODER_OBJECT_ID_INTERNAL_TMDS1 0x02
+#define ENCODER_OBJECT_ID_INTERNAL_TMDS2 0x03
+#define ENCODER_OBJECT_ID_INTERNAL_DAC1 0x04
+#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */
+#define ENCODER_OBJECT_ID_INTERNAL_SDVOA 0x06
+#define ENCODER_OBJECT_ID_INTERNAL_SDVOB 0x07
+
+/* External Third Party Encoders */
+#define ENCODER_OBJECT_ID_SI170B 0x08
+#define ENCODER_OBJECT_ID_CH7303 0x09
+#define ENCODER_OBJECT_ID_CH7301 0x0A
+#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_EXTERNAL_SDVOA 0x0C
+#define ENCODER_OBJECT_ID_EXTERNAL_SDVOB 0x0D
+#define ENCODER_OBJECT_ID_TITFP513 0x0E
+#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */
+#define ENCODER_OBJECT_ID_VT1623 0x10
+#define ENCODER_OBJECT_ID_HDMI_SI1930 0x11
+#define ENCODER_OBJECT_ID_HDMI_INTERNAL 0x12
+#define ENCODER_OBJECT_ID_ALMOND 0x22
+#define ENCODER_OBJECT_ID_TRAVIS 0x23
+#define ENCODER_OBJECT_ID_NUTMEG 0x22
+#define ENCODER_OBJECT_ID_HDMI_ANX9805 0x26
+
+/* Kaleidoscope (KLDSCP) Class Display Hardware (internal) */
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 0x13
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 0x14
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 0x15
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */
+#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */
+#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */
+#define ENCODER_OBJECT_ID_INTERNAL_DDI 0x19
+#define ENCODER_OBJECT_ID_VT1625 0x1A
+#define ENCODER_OBJECT_ID_HDMI_SI1932 0x1B
+#define ENCODER_OBJECT_ID_DP_AN9801 0x1C
+#define ENCODER_OBJECT_ID_DP_DP501 0x1D
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY 0x1E
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA 0x1F
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 0x20
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 0x21
+#define ENCODER_OBJECT_ID_INTERNAL_VCE 0x24
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY3 0x25
+#define ENCODER_OBJECT_ID_INTERNAL_AMCLK 0x27
+
+#define ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO 0xFF
+
+/****************************************************/
+/* Connector Object ID Definition */
+/****************************************************/
+#define CONNECTOR_OBJECT_ID_NONE 0x00
+#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I 0x01
+#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I 0x02
+#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D 0x03
+#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D 0x04
+#define CONNECTOR_OBJECT_ID_VGA 0x05
+#define CONNECTOR_OBJECT_ID_COMPOSITE 0x06
+#define CONNECTOR_OBJECT_ID_SVIDEO 0x07
+#define CONNECTOR_OBJECT_ID_YPbPr 0x08
+#define CONNECTOR_OBJECT_ID_D_CONNECTOR 0x09
+#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */
+#define CONNECTOR_OBJECT_ID_SCART 0x0B
+#define CONNECTOR_OBJECT_ID_HDMI_TYPE_A 0x0C
+#define CONNECTOR_OBJECT_ID_HDMI_TYPE_B 0x0D
+#define CONNECTOR_OBJECT_ID_LVDS 0x0E
+#define CONNECTOR_OBJECT_ID_7PIN_DIN 0x0F
+#define CONNECTOR_OBJECT_ID_PCIE_CONNECTOR 0x10
+#define CONNECTOR_OBJECT_ID_CROSSFIRE 0x11
+#define CONNECTOR_OBJECT_ID_HARDCODE_DVI 0x12
+#define CONNECTOR_OBJECT_ID_DISPLAYPORT 0x13
+#define CONNECTOR_OBJECT_ID_eDP 0x14
+#define CONNECTOR_OBJECT_ID_MXM 0x15
+#define CONNECTOR_OBJECT_ID_LVDS_eDP 0x16
+
+/* deleted */
+
+/****************************************************/
+/* Router Object ID Definition */
+/****************************************************/
+#define ROUTER_OBJECT_ID_NONE 0x00
+#define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL 0x01
+
+/****************************************************/
+/* Generic Object ID Definition */
+/****************************************************/
+#define GENERIC_OBJECT_ID_NONE 0x00
+#define GENERIC_OBJECT_ID_GLSYNC 0x01
+#define GENERIC_OBJECT_ID_PX2_NON_DRIVABLE 0x02
+#define GENERIC_OBJECT_ID_MXM_OPM 0x03
+#define GENERIC_OBJECT_ID_STEREO_PIN 0x04 //This object could show up from Misc Object table, it follows ATOM_OBJECT format, and contains one ATOM_OBJECT_GPIO_CNTL_RECORD for the stereo pin
+
+/****************************************************/
+/* Graphics Object ENUM ID Definition */
+/****************************************************/
+#define GRAPH_OBJECT_ENUM_ID1 0x01
+#define GRAPH_OBJECT_ENUM_ID2 0x02
+#define GRAPH_OBJECT_ENUM_ID3 0x03
+#define GRAPH_OBJECT_ENUM_ID4 0x04
+#define GRAPH_OBJECT_ENUM_ID5 0x05
+#define GRAPH_OBJECT_ENUM_ID6 0x06
+#define GRAPH_OBJECT_ENUM_ID7 0x07
+
+/****************************************************/
+/* Graphics Object ID Bit definition */
+/****************************************************/
+#define OBJECT_ID_MASK 0x00FF
+#define ENUM_ID_MASK 0x0700
+#define RESERVED1_ID_MASK 0x0800
+#define OBJECT_TYPE_MASK 0x7000
+#define RESERVED2_ID_MASK 0x8000
+
+#define OBJECT_ID_SHIFT 0x00
+#define ENUM_ID_SHIFT 0x08
+#define OBJECT_TYPE_SHIFT 0x0C
+
+
+/****************************************************/
+/* Graphics Object family definition */
+/****************************************************/
+#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
+ GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT)
+/****************************************************/
+/* GPU Object ID definition - Shared with BIOS */
+/****************************************************/
+#define GPU_ENUM_ID1 ( GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
+
+/****************************************************/
+/* Encoder Object ID definition - Shared with BIOS */
+/****************************************************/
+/*
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 0x2102
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 0x2103
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1 0x2104
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1 0x2105
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 0x2106
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 0x2107
+#define ENCODER_SIL170B_ENUM_ID1 0x2108
+#define ENCODER_CH7303_ENUM_ID1 0x2109
+#define ENCODER_CH7301_ENUM_ID1 0x210A
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1 0x210B
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 0x210C
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 0x210D
+#define ENCODER_TITFP513_ENUM_ID1 0x210E
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 0x210F
+#define ENCODER_VT1623_ENUM_ID1 0x2110
+#define ENCODER_HDMI_SI1930_ENUM_ID1 0x2111
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1 0x2112
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 0x2113
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 0x2114
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 0x2115
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116
+#define ENCODER_SI178_ENUM_ID1 0x2117
+#define ENCODER_MVPU_FPGA_ENUM_ID1 0x2118
+#define ENCODER_INTERNAL_DDI_ENUM_ID1 0x2119
+#define ENCODER_VT1625_ENUM_ID1 0x211A
+#define ENCODER_HDMI_SI1932_ENUM_ID1 0x211B
+#define ENCODER_ENCODER_DP_AN9801_ENUM_ID1 0x211C
+#define ENCODER_DP_DP501_ENUM_ID1 0x211D
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 0x211E
+*/
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+#define ENCODER_SIL170B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7303_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7301_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_TITFP513_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1623_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1930_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) // Shared with CV/TV and CRT
+
+#define ENCODER_SI178_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
+
+#define ENCODER_MVPU_FPGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DDI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1625_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1932_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_DP501_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_AN9801_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY3_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY3 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY3_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY3 << OBJECT_ID_SHIFT)
+
+#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
+
+#define ENCODER_ALMOND_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_ALMOND << OBJECT_ID_SHIFT)
+
+#define ENCODER_ALMOND_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_ALMOND << OBJECT_ID_SHIFT)
+
+#define ENCODER_TRAVIS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_TRAVIS << OBJECT_ID_SHIFT)
+
+#define ENCODER_TRAVIS_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_TRAVIS << OBJECT_ID_SHIFT)
+
+#define ENCODER_NUTMEG_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_NUTMEG << OBJECT_ID_SHIFT)
+
+#define ENCODER_VCE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_VCE << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_ANX9805_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_ANX9805 << OBJECT_ID_SHIFT)
+
+/****************************************************/
+/* Connector Object ID definition - Shared with BIOS */
+/****************************************************/
+/*
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 0x3101
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 0x3102
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 0x3103
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 0x3104
+#define CONNECTOR_VGA_ENUM_ID1 0x3105
+#define CONNECTOR_COMPOSITE_ENUM_ID1 0x3106
+#define CONNECTOR_SVIDEO_ENUM_ID1 0x3107
+#define CONNECTOR_YPbPr_ENUM_ID1 0x3108
+#define CONNECTOR_D_CONNECTORE_ENUM_ID1 0x3109
+#define CONNECTOR_9PIN_DIN_ENUM_ID1 0x310A
+#define CONNECTOR_SCART_ENUM_ID1 0x310B
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 0x310C
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 0x310D
+#define CONNECTOR_LVDS_ENUM_ID1 0x310E
+#define CONNECTOR_7PIN_DIN_ENUM_ID1 0x310F
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 0x3110
+*/
+#define CONNECTOR_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_LVDS_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_eDP_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_eDP_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_COMPOSITE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_COMPOSITE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SVIDEO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SVIDEO_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_YPbPr_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_YPbPr_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_D_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_D_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_9PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_9PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SCART_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SCART_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_7PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_7PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_MXM_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_A
+
+#define CONNECTOR_MXM_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_B
+
+#define CONNECTOR_MXM_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_C
+
+#define CONNECTOR_MXM_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_D
+
+#define CONNECTOR_MXM_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_TXxx
+
+#define CONNECTOR_MXM_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_UXxx
+
+#define CONNECTOR_MXM_ENUM_ID7 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID7 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DAC
+
+#define CONNECTOR_LVDS_eDP_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS_eDP << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_LVDS_eDP_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS_eDP << OBJECT_ID_SHIFT)
+
+/****************************************************/
+/* Router Object ID definition - Shared with BIOS */
+/****************************************************/
+#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
+
+/* deleted */
+
+/****************************************************/
+/* Generic Object ID definition - Shared with BIOS */
+/****************************************************/
+#define GENERICOBJECT_GLSYNC_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_GLSYNC << OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID2 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_MXM_OPM_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_MXM_OPM << OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_STEREO_PIN_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_STEREO_PIN << OBJECT_ID_SHIFT)
+
+/****************************************************/
+/* Object Cap definition - Shared with BIOS */
+/****************************************************/
+#define GRAPHICS_OBJECT_CAP_I2C 0x00000001L
+#define GRAPHICS_OBJECT_CAP_TABLE_ID 0x00000002L
+
+
+#define GRAPHICS_OBJECT_I2CCOMMAND_TABLE_ID 0x01
+#define GRAPHICS_OBJECT_HOTPLUGDETECTIONINTERUPT_TABLE_ID 0x02
+#define GRAPHICS_OBJECT_ENCODER_OUTPUT_PROTECTION_TABLE_ID 0x03
+
+#if defined(_X86_)
+#pragma pack()
+#endif
+
+#endif /*GRAPHICTYPE */
+
+
+
+
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios.h b/drivers/gpu/drm/amd/amdgpu/atombios.h
new file mode 100644
index 0000000..44c5d4a
--- /dev/null
+++ b/drivers/gpu/drm/amd/amdgpu/atombios.h
@@ -0,0 +1,8555 @@
+/*
+ * Copyright 2006-2007 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+
+/****************************************************************************/
+/*Portion I: Definitions shared between VBIOS and Driver */
+/****************************************************************************/
+
+#ifndef _ATOMBIOS_H
+#define _ATOMBIOS_H
+
+#define ATOM_VERSION_MAJOR 0x00020000
+#define ATOM_VERSION_MINOR 0x00000002
+
+#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
+
+/* Endianness should be specified before inclusion,
+ * default to little endian
+ */
+#ifndef ATOM_BIG_ENDIAN
+#error Endian not specified
+#endif
+
+#ifdef _H2INC
+ #ifndef ULONG
+ typedef unsigned long ULONG;
+ #endif
+
+ #ifndef UCHAR
+ typedef unsigned char UCHAR;
+ #endif
+
+ #ifndef USHORT
+ typedef unsigned short USHORT;
+ #endif
+#endif
+
+#define ATOM_DAC_A 0
+#define ATOM_DAC_B 1
+#define ATOM_EXT_DAC 2
+
+#define ATOM_CRTC1 0
+#define ATOM_CRTC2 1
+#define ATOM_CRTC3 2
+#define ATOM_CRTC4 3
+#define ATOM_CRTC5 4
+#define ATOM_CRTC6 5
+
+#define ATOM_UNDERLAY_PIPE0 16
+#define ATOM_UNDERLAY_PIPE1 17
+
+#define ATOM_CRTC_INVALID 0xFF
+
+#define ATOM_DIGA 0
+#define ATOM_DIGB 1
+
+#define ATOM_PPLL1 0
+#define ATOM_PPLL2 1
+#define ATOM_DCPLL 2
+#define ATOM_PPLL0 2
+#define ATOM_PPLL3 3
+
+#define ATOM_EXT_PLL1 8
+#define ATOM_EXT_PLL2 9
+#define ATOM_EXT_CLOCK 10
+#define ATOM_PPLL_INVALID 0xFF
+
+#define ENCODER_REFCLK_SRC_P1PLL 0
+#define ENCODER_REFCLK_SRC_P2PLL 1
+#define ENCODER_REFCLK_SRC_DCPLL 2
+#define ENCODER_REFCLK_SRC_EXTCLK 3
+#define ENCODER_REFCLK_SRC_INVALID 0xFF
+
+#define ATOM_SCALER_DISABLE 0 //For Fudo, it's bypass and auto-cengter & no replication
+#define ATOM_SCALER_CENTER 1 //For Fudo, it's bypass and auto-center & auto replication
+#define ATOM_SCALER_EXPANSION 2 //For Fudo, it's 2 Tap alpha blending mode
+#define ATOM_SCALER_MULTI_EX 3 //For Fudo only, it's multi-tap mode only used to drive TV or CV, only used by Bios
+
+#define ATOM_DISABLE 0
+#define ATOM_ENABLE 1
+#define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
+#define ATOM_LCD_BLON (ATOM_ENABLE+2)
+#define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
+#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
+#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
+#define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
+#define ATOM_INIT (ATOM_DISABLE+7)
+#define ATOM_GET_STATUS (ATOM_DISABLE+8)
+
+#define ATOM_BLANKING 1
+#define ATOM_BLANKING_OFF 0
+
+
+#define ATOM_CRT1 0
+#define ATOM_CRT2 1
+
+#define ATOM_TV_NTSC 1
+#define ATOM_TV_NTSCJ 2
+#define ATOM_TV_PAL 3
+#define ATOM_TV_PALM 4
+#define ATOM_TV_PALCN 5
+#define ATOM_TV_PALN 6
+#define ATOM_TV_PAL60 7
+#define ATOM_TV_SECAM 8
+#define ATOM_TV_CV 16
+
+#define ATOM_DAC1_PS2 1
+#define ATOM_DAC1_CV 2
+#define ATOM_DAC1_NTSC 3
+#define ATOM_DAC1_PAL 4
+
+#define ATOM_DAC2_PS2 ATOM_DAC1_PS2
+#define ATOM_DAC2_CV ATOM_DAC1_CV
+#define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
+#define ATOM_DAC2_PAL ATOM_DAC1_PAL
+
+#define ATOM_PM_ON 0
+#define ATOM_PM_STANDBY 1
+#define ATOM_PM_SUSPEND 2
+#define ATOM_PM_OFF 3
+
+// For ATOM_LVDS_INFO_V12
+// Bit0:{=0:single, =1:dual},
+// Bit1 {=0:666RGB, =1:888RGB},
+// Bit2:3:{Grey level}
+// Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
+#define ATOM_PANEL_MISC_DUAL 0x00000001
+#define ATOM_PANEL_MISC_888RGB 0x00000002
+#define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
+#define ATOM_PANEL_MISC_FPDI 0x00000010
+#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
+#define ATOM_PANEL_MISC_SPATIAL 0x00000020
+#define ATOM_PANEL_MISC_TEMPORAL 0x00000040
+#define ATOM_PANEL_MISC_API_ENABLED 0x00000080
+
+#define MEMTYPE_DDR1 "DDR1"
+#define MEMTYPE_DDR2 "DDR2"
+#define MEMTYPE_DDR3 "DDR3"
+#define MEMTYPE_DDR4 "DDR4"
+
+#define ASIC_BUS_TYPE_PCI "PCI"
+#define ASIC_BUS_TYPE_AGP "AGP"
+#define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
+
+//Maximum size of that FireGL flag string
+#define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support
+#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING )
+
+#define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop
+#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
+
+#define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support
+#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING )
+
+#define HW_ASSISTED_I2C_STATUS_FAILURE 2
+#define HW_ASSISTED_I2C_STATUS_SUCCESS 1
+
+#pragma pack(1) // BIOS data must use byte aligment
+
+// Define offset to location of ROM header.
+#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
+#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
+
+#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
+#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 //including the terminator 0x0!
+#define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
+#define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
+
+/****************************************************************************/
+// Common header for all tables (Data table, Command table).
+// Every table pointed _ATOM_MASTER_DATA_TABLE has this common header.
+// And the pointer actually points to this header.
+/****************************************************************************/
+
+typedef struct _ATOM_COMMON_TABLE_HEADER
+{
+ USHORT usStructureSize;
+ UCHAR ucTableFormatRevision; //Change it when the Parser is not backward compatible
+ UCHAR ucTableContentRevision; //Change it only when the table needs to change but the firmware
+ //Image can't be updated, while Driver needs to carry the new table!
+}ATOM_COMMON_TABLE_HEADER;
+
+/****************************************************************************/
+// Structure stores the ROM header.
+/****************************************************************************/
+typedef struct _ATOM_ROM_HEADER
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR uaFirmWareSignature[4]; //Signature to distinguish between Atombios and non-atombios,
+ //atombios should init it as "ATOM", don't change the position
+ USHORT usBiosRuntimeSegmentAddress;
+ USHORT usProtectedModeInfoOffset;
+ USHORT usConfigFilenameOffset;
+ USHORT usCRC_BlockOffset;
+ USHORT usBIOS_BootupMessageOffset;
+ USHORT usInt10Offset;
+ USHORT usPciBusDevInitCode;
+ USHORT usIoBaseAddress;
+ USHORT usSubsystemVendorID;
+ USHORT usSubsystemID;
+ USHORT usPCI_InfoOffset;
+ USHORT usMasterCommandTableOffset;//Offest for SW to get all command table offsets, Don't change the position
+ USHORT usMasterDataTableOffset; //Offest for SW to get all data table offsets, Don't change the position
+ UCHAR ucExtendedFunctionCode;
+ UCHAR ucReserved;
+}ATOM_ROM_HEADER;
+
+//==============================Command Table Portion====================================
+
+
+/****************************************************************************/
+// Structures used in Command.mtb
+/****************************************************************************/
+typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
+ USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1
+ USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON
+ USHORT ASIC_RegistersInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
+ USHORT VRAM_BlockVenderDetection; //Atomic Table, used only by Bios
+ USHORT DIGxEncoderControl; //Only used by Bios
+ USHORT MemoryControllerInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
+ USHORT EnableCRTCMemReq; //Function Table,directly used by various SW components,latest version 2.1
+ USHORT MemoryParamAdjust; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed
+ USHORT DVOEncoderControl; //Function Table,directly used by various SW components,latest version 1.2
+ USHORT GPIOPinControl; //Atomic Table, only used by Bios
+ USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1
+ USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1
+ USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2
+ USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
+ USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT MemoryPLLInit; //Atomic Table, used only by Bios
+ USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes.
+ USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios
+ USHORT SetUniphyInstance; //Atomic Table, only used by Bios
+ USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2
+ USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3
+ USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
+ USHORT GetConditionalGoldenSetting; //Only used by Bios
+ USHORT SMC_Init; //Function Table,directly used by various SW components,latest version 1.1
+ USHORT PatchMCSetting; //only used by BIOS
+ USHORT MC_SEQ_Control; //only used by BIOS
+ USHORT Gfx_Harvesting; //Atomic Table, Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting
+ USHORT EnableScaler; //Atomic Table, used only by Bios
+ USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT GetPixelClock; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT EnableVGA_Render; //Function Table,directly used by various SW components,latest version 1.1
+ USHORT GetSCLKOverMCLKRatio; //Atomic Table, only used by Bios
+ USHORT SetCRTC_Timing; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT SetCRTC_OverScan; //Atomic Table, used by various SW components,latest version 1.1
+ USHORT SetCRTC_Replication; //Atomic Table, used only by Bios
+ USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios
+ USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios
+ USHORT LUT_AutoFill; //Atomic Table, only used by Bios
+ USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios
+ USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT GetEngineClock; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1
+ USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios
+ USHORT MemoryCleanUp; //Atomic Table, only used by Bios
+ USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios
+ USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components
+ USHORT ReadHWAssistedI2CStatus; //Atomic Table, indirectly used by various SW components
+ USHORT SpeedFanControl; //Function Table,indirectly used by various SW components,called from ASIC_Init
+ USHORT PowerConnectorDetection; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock
+ USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock
+ USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios
+ USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT MemoryTraining; //Atomic Table, used only by Bios
+ USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2
+ USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
+ USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT ReadEfuseValue; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
+ USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
+ USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
+ USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
+ USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
+ USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
+ USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
+ USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
+ USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios
+ USHORT DPEncoderService; //Function Table,only used by Bios
+ USHORT GetVoltageInfo; //Function Table,only used by Bios since SI
+}ATOM_MASTER_LIST_OF_COMMAND_TABLES;
+
+// For backward compatible
+#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
+#define DPTranslatorControl DIG2EncoderControl
+#define UNIPHYTransmitterControl DIG1TransmitterControl
+#define LVTMATransmitterControl DIG2TransmitterControl
+#define SetCRTC_DPM_State GetConditionalGoldenSetting
+#define ASIC_StaticPwrMgtStatusChange SetUniphyInstance
+#define HPDInterruptService ReadHWAssistedI2CStatus
+#define EnableVGA_Access GetSCLKOverMCLKRatio
+#define EnableYUV GetDispObjectInfo
+#define DynamicClockGating EnableDispPowerGating
+#define SetupHWAssistedI2CStatus ComputeMemoryClockParam
+#define DAC2OutputControl ReadEfuseValue
+
+#define TMDSAEncoderControl PatchMCSetting
+#define LVDSEncoderControl MC_SEQ_Control
+#define LCD1OutputControl HW_Misc_Operation
+#define TV1OutputControl Gfx_Harvesting
+#define TVEncoderControl SMC_Init
+
+typedef struct _ATOM_MASTER_COMMAND_TABLE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
+}ATOM_MASTER_COMMAND_TABLE;
+
+/****************************************************************************/
+// Structures used in every command table
+/****************************************************************************/
+typedef struct _ATOM_TABLE_ATTRIBUTE
+{
+#if ATOM_BIG_ENDIAN
+ USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
+ USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
+ USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
+#else
+ USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
+ USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
+ USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
+#endif
+}ATOM_TABLE_ATTRIBUTE;
+
+/****************************************************************************/
+// Common header for all command tables.
+// Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
+// And the pointer actually points to this header.
+/****************************************************************************/
+typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
+{
+ ATOM_COMMON_TABLE_HEADER CommonHeader;
+ ATOM_TABLE_ATTRIBUTE TableAttribute;
+}ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
+
+/****************************************************************************/
+// Structures used by ComputeMemoryEnginePLLTable
+/****************************************************************************/
+
+#define COMPUTE_MEMORY_PLL_PARAM 1
+#define COMPUTE_ENGINE_PLL_PARAM 2
+#define ADJUST_MC_SETTING_PARAM 3
+
+/****************************************************************************/
+// Structures used by AdjustMemoryControllerTable
+/****************************************************************************/
+typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
+ ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
+ ULONG ulClockFreq:24;
+#else
+ ULONG ulClockFreq:24;
+ ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
+ ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
+#endif
+}ATOM_ADJUST_MEMORY_CLOCK_FREQ;
+#define POINTER_RETURN_FLAG 0x80
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
+{
+ ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
+ UCHAR ucAction; //0:reserved //1:Memory //2:Engine
+ UCHAR ucReserved; //may expand to return larger Fbdiv later
+ UCHAR ucFbDiv; //return value
+ UCHAR ucPostDiv; //return value
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
+{
+ ULONG ulClock; //When return, [23:0] return real clock
+ UCHAR ucAction; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
+ USHORT usFbDiv; //return Feedback value to be written to register
+ UCHAR ucPostDiv; //return post div to be written to register
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
+
+#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
+
+#define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value
+#define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
+#define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
+#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
+#define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
+#define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
+#define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
+
+#define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
+#define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
+#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
+#define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
+#define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
+#define b3DRAM_SELF_REFRESH_EXIT 0x20 //Applicable to DRAM self refresh exit only. when set, it means it will go to program DRAM self refresh exit path
+
+typedef struct _ATOM_COMPUTE_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
+ ULONG ulClockFreq:24; // in unit of 10kHz
+#else
+ ULONG ulClockFreq:24; // in unit of 10kHz
+ ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
+#endif
+}ATOM_COMPUTE_CLOCK_FREQ;
+
+typedef struct _ATOM_S_MPLL_FB_DIVIDER
+{
+ USHORT usFbDivFrac;
+ USHORT usFbDiv;
+}ATOM_S_MPLL_FB_DIVIDER;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
+{
+ union
+ {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
+ };
+ UCHAR ucRefDiv; //Output Parameter
+ UCHAR ucPostDiv; //Output Parameter
+ UCHAR ucCntlFlag; //Output Parameter
+ UCHAR ucReserved;
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
+
+// ucCntlFlag
+#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
+#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
+#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
+#define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9 8
+
+
+// V4 are only used for APU which PLL outside GPU
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly
+ ULONG ulClock:24; //Input= target clock, output = actual clock
+#else
+ ULONG ulClock:24; //Input= target clock, output = actual clock
+ ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly
+#endif
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
+{
+ union
+ {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
+ };
+ UCHAR ucRefDiv; //Output Parameter
+ UCHAR ucPostDiv; //Output Parameter
+ union
+ {
+ UCHAR ucCntlFlag; //Output Flags
+ UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
+ };
+ UCHAR ucReserved;
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
+
+
+typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6
+{
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
+ ULONG ulReserved[2];
+}COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6;
+
+//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
+#define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK 0x0f
+#define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK 0x00
+#define COMPUTE_GPUCLK_INPUT_FLAG_SCLK 0x01
+
+
+typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6
+{
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock; //Output Parameter: ucPostDiv=DFS divider
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter: PLL FB divider
+ UCHAR ucPllRefDiv; //Output Parameter: PLL ref divider
+ UCHAR ucPllPostDiv; //Output Parameter: PLL post divider
+ UCHAR ucPllCntlFlag; //Output Flags: control flag
+ UCHAR ucReserved;
+}COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6;
+
+//ucPllCntlFlag
+#define SPLL_CNTL_FLAG_VCO_MODE_MASK 0x03
+
+
+// ucInputFlag
+#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
+
+// use for ComputeMemoryClockParamTable
+typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
+{
+ union
+ {
+ ULONG ulClock;
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
+ };
+ UCHAR ucDllSpeed; //Output
+ UCHAR ucPostDiv; //Output
+ union{
+ UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
+ UCHAR ucPllCntlFlag; //Output:
+ };
+ UCHAR ucBWCntl;
+}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
+
+// definition of ucInputFlag
+#define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01
+// definition of ucPllCntlFlag
+#define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03
+#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04
+#define MPLL_CNTL_FLAG_QDR_ENABLE 0x08
+#define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10
+
+//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
+#define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04
+
+typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
+{
+ ATOM_COMPUTE_CLOCK_FREQ ulClock;
+ ULONG ulReserved[2];
+}DYNAMICE_MEMORY_SETTINGS_PARAMETER;
+
+typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
+{
+ ATOM_COMPUTE_CLOCK_FREQ ulClock;
+ ULONG ulMemoryClock;
+ ULONG ulReserved;
+}DYNAMICE_ENGINE_SETTINGS_PARAMETER;
+
+/****************************************************************************/
+// Structures used by SetEngineClockTable
+/****************************************************************************/
+typedef struct _SET_ENGINE_CLOCK_PARAMETERS
+{
+ ULONG ulTargetEngineClock; //In 10Khz unit
+}SET_ENGINE_CLOCK_PARAMETERS;
+
+typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
+{
+ ULONG ulTargetEngineClock; //In 10Khz unit
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+}SET_ENGINE_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+// Structures used by SetMemoryClockTable
+/****************************************************************************/
+typedef struct _SET_MEMORY_CLOCK_PARAMETERS
+{
+ ULONG ulTargetMemoryClock; //In 10Khz unit
+}SET_MEMORY_CLOCK_PARAMETERS;
+
+typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
+{
+ ULONG ulTargetMemoryClock; //In 10Khz unit
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+}SET_MEMORY_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+// Structures used by ASIC_Init.ctb
+/****************************************************************************/
+typedef struct _ASIC_INIT_PARAMETERS
+{
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+}ASIC_INIT_PARAMETERS;
+
+typedef struct _ASIC_INIT_PS_ALLOCATION
+{
+ ASIC_INIT_PARAMETERS sASICInitClocks;
+ SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure
+}ASIC_INIT_PS_ALLOCATION;
+
+typedef struct _ASIC_INIT_CLOCK_PARAMETERS
+{
+ ULONG ulClkFreqIn10Khz:24;
+ ULONG ucClkFlag:8;
+}ASIC_INIT_CLOCK_PARAMETERS;
+
+typedef struct _ASIC_INIT_PARAMETERS_V1_2
+{
+ ASIC_INIT_CLOCK_PARAMETERS asSclkClock; //In 10Khz unit
+ ASIC_INIT_CLOCK_PARAMETERS asMemClock; //In 10Khz unit
+}ASIC_INIT_PARAMETERS_V1_2;
+
+typedef struct _ASIC_INIT_PS_ALLOCATION_V1_2
+{
+ ASIC_INIT_PARAMETERS_V1_2 sASICInitClocks;
+ ULONG ulReserved[8];
+}ASIC_INIT_PS_ALLOCATION_V1_2;
+
+/****************************************************************************/
+// Structure used by DynamicClockGatingTable.ctb
+/****************************************************************************/
+typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
+{
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[3];
+}DYNAMIC_CLOCK_GATING_PARAMETERS;
+#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
+
+/****************************************************************************/
+// Structure used by EnableDispPowerGatingTable.ctb
+/****************************************************************************/
+typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1
+{
+ UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ...
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[2];
+}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
+
+typedef struct _ENABLE_DISP_POWER_GATING_PS_ALLOCATION
+{
+ UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ...
+ UCHAR ucEnable; // ATOM_ENABLE/ATOM_DISABLE/ATOM_INIT
+ UCHAR ucPadding[2];
+ ULONG ulReserved[4];
+}ENABLE_DISP_POWER_GATING_PS_ALLOCATION;
+
+/****************************************************************************/
+// Structure used by EnableASIC_StaticPwrMgtTable.ctb
+/****************************************************************************/
+typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
+{
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[3];
+}ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
+#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
+
+/****************************************************************************/
+// Structures used by DAC_LoadDetectionTable.ctb
+/****************************************************************************/
+typedef struct _DAC_LOAD_DETECTION_PARAMETERS
+{
+ USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
+ UCHAR ucDacType; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
+ UCHAR ucMisc; //Valid only when table revision =1.3 and above
+}DAC_LOAD_DETECTION_PARAMETERS;
+
+// DAC_LOAD_DETECTION_PARAMETERS.ucMisc
+#define DAC_LOAD_MISC_YPrPb 0x01
+
+typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
+{
+ DAC_LOAD_DETECTION_PARAMETERS sDacload;
+ ULONG Reserved[2];// Don't set this one, allocation for EXT DAC
+}DAC_LOAD_DETECTION_PS_ALLOCATION;
+
+/****************************************************************************/
+// Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
+/****************************************************************************/
+typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ UCHAR ucDacStandard; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
+ UCHAR ucAction; // 0: turn off encoder
+ // 1: setup and turn on encoder
+ // 7: ATOM_ENCODER_INIT Initialize DAC
+}DAC_ENCODER_CONTROL_PARAMETERS;
+
+#define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
+
+/****************************************************************************/
+// Structures used by DIG1EncoderControlTable
+// DIG2EncoderControlTable
+// ExternalEncoderControlTable
+/****************************************************************************/
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ UCHAR ucConfig;
+ // [2] Link Select:
+ // =0: PHY linkA if bfLane<3
+ // =1: PHY linkB if bfLanes<3
+ // =0: PHY linkA+B if bfLanes=3
+ // [3] Transmitter Sel
+ // =0: UNIPHY or PCIEPHY
+ // =1: LVTMA
+ UCHAR ucAction; // =0: turn off encoder
+ // =1: turn on encoder
+ UCHAR ucEncoderMode;
+ // =0: DP encoder
+ // =1: LVDS encoder
+ // =2: DVI encoder
+ // =3: HDMI encoder
+ // =4: SDVO encoder
+ UCHAR ucLaneNum; // how many lanes to enable
+ UCHAR ucReserved[2];
+}DIG_ENCODER_CONTROL_PARAMETERS;
+#define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
+#define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
+
+//ucConfig
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02
+#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
+#define ATOM_ENCODER_CONFIG_LINKA 0x00
+#define ATOM_ENCODER_CONFIG_LINKB 0x04
+#define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
+#define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
+#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
+#define ATOM_ENCODER_CONFIG_UNIPHY 0x00
+#define ATOM_ENCODER_CONFIG_LVTMA 0x08
+#define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
+#define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
+#define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0
+// ucAction
+// ATOM_ENABLE: Enable Encoder
+// ATOM_DISABLE: Disable Encoder
+
+//ucEncoderMode
+#define ATOM_ENCODER_MODE_DP 0
+#define ATOM_ENCODER_MODE_LVDS 1
+#define ATOM_ENCODER_MODE_DVI 2
+#define ATOM_ENCODER_MODE_HDMI 3
+#define ATOM_ENCODER_MODE_SDVO 4
+#define ATOM_ENCODER_MODE_DP_AUDIO 5
+#define ATOM_ENCODER_MODE_TV 13
+#define ATOM_ENCODER_MODE_CV 14
+#define ATOM_ENCODER_MODE_CRT 15
+#define ATOM_ENCODER_MODE_DVO 16
+#define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2
+#define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2
+
+
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReserved1:2;
+ UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
+ UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
+ UCHAR ucReserved:1;
+ UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
+#else
+ UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
+ UCHAR ucReserved:1;
+ UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
+ UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
+ UCHAR ucReserved1:2;
+#endif
+}ATOM_DIG_ENCODER_CONFIG_V2;
+
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
+ UCHAR ucAction;
+ UCHAR ucEncoderMode;
+ // =0: DP encoder
+ // =1: LVDS encoder
+ // =2: DVI encoder
+ // =3: HDMI encoder
+ // =4: SDVO encoder
+ UCHAR ucLaneNum; // how many lanes to enable
+ UCHAR ucStatus; // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS
+ UCHAR ucReserved;
+}DIG_ENCODER_CONTROL_PARAMETERS_V2;
+
+//ucConfig
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
+#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
+#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
+
+// ucAction:
+// ATOM_DISABLE
+// ATOM_ENABLE
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b
+#define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c
+#define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d
+#define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS 0x0e
+#define ATOM_ENCODER_CMD_SETUP 0x0f
+#define ATOM_ENCODER_CMD_SETUP_PANEL_MODE 0x10
+
+// ucStatus
+#define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10
+#define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=3
+// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReserved1:1;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
+ UCHAR ucReserved:3;
+ UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
+#else
+ UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
+ UCHAR ucReserved:3;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
+ UCHAR ucReserved1:1;
+#endif
+}ATOM_DIG_ENCODER_CONFIG_V3;
+
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70
+#define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00
+#define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10
+#define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20
+#define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30
+#define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40
+#define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ ATOM_DIG_ENCODER_CONFIG_V3 acConfig;
+ UCHAR ucAction;
+ union{
+ UCHAR ucEncoderMode;
+ // =0: DP encoder
+ // =1: LVDS encoder
+ // =2: DVI encoder
+ // =3: HDMI encoder
+ // =4: SDVO encoder
+ // =5: DP audio
+ UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
+ // =0: external DP
+ // =0x1: internal DP2
+ // =0x11: internal DP1 for NutMeg/Travis DP translator
+ };
+ UCHAR ucLaneNum; // how many lanes to enable
+ UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
+ UCHAR ucReserved;
+}DIG_ENCODER_CONTROL_PARAMETERS_V3;
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=4
+// start from NI
+// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReserved1:1;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
+ UCHAR ucReserved:2;
+ UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
+#else
+ UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
+ UCHAR ucReserved:2;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
+ UCHAR ucReserved1:1;
+#endif
+}ATOM_DIG_ENCODER_CONFIG_V4;
+
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03
+#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70
+#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00
+#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10
+#define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20
+#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30
+#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40
+#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50
+#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ union{
+ ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucAction;
+ union{
+ UCHAR ucEncoderMode;
+ // =0: DP encoder
+ // =1: LVDS encoder
+ // =2: DVI encoder
+ // =3: HDMI encoder
+ // =4: SDVO encoder
+ // =5: DP audio
+ UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
+ // =0: external DP
+ // =0x1: internal DP2
+ // =0x11: internal DP1 for NutMeg/Travis DP translator
+ };
+ UCHAR ucLaneNum; // how many lanes to enable
+ UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
+ UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
+}DIG_ENCODER_CONTROL_PARAMETERS_V4;
+
+// define ucBitPerColor:
+#define PANEL_BPC_UNDEFINE 0x00
+#define PANEL_6BIT_PER_COLOR 0x01
+#define PANEL_8BIT_PER_COLOR 0x02
+#define PANEL_10BIT_PER_COLOR 0x03
+#define PANEL_12BIT_PER_COLOR 0x04
+#define PANEL_16BIT_PER_COLOR 0x05
+
+//define ucPanelMode
+#define DP_PANEL_MODE_EXTERNAL_DP_MODE 0x00
+#define DP_PANEL_MODE_INTERNAL_DP2_MODE 0x01
+#define DP_PANEL_MODE_INTERNAL_DP1_MODE 0x11
+
+/****************************************************************************/
+// Structures used by UNIPHYTransmitterControlTable
+// LVTMATransmitterControlTable
+// DVOOutputControlTable
+/****************************************************************************/
+typedef struct _ATOM_DP_VS_MODE
+{
+ UCHAR ucLaneSel;
+ UCHAR ucLaneSet;
+}ATOM_DP_VS_MODE;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
+{
+ union
+ {
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
+ ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
+ };
+ UCHAR ucConfig;
+ // [0]=0: 4 lane Link,
+ // =1: 8 lane Link ( Dual Links TMDS )
+ // [1]=0: InCoherent mode
+ // =1: Coherent Mode
+ // [2] Link Select:
+ // =0: PHY linkA if bfLane<3
+ // =1: PHY linkB if bfLanes<3
+ // =0: PHY linkA+B if bfLanes=3
+ // [5:4]PCIE lane Sel
+ // =0: lane 0~3 or 0~7
+ // =1: lane 4~7
+ // =2: lane 8~11 or 8~15
+ // =3: lane 12~15
+ UCHAR ucAction; // =0: turn off encoder
+ // =1: turn on encoder
+ UCHAR ucReserved[4];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS;
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+//ucInitInfo
+#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
+
+//ucConfig
+#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
+#define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
+#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
+
+#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
+#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
+#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
+
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
+#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
+
+//ucAction
+#define ATOM_TRANSMITTER_ACTION_DISABLE 0
+#define ATOM_TRANSMITTER_ACTION_ENABLE 1
+#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
+#define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
+#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
+#define ATOM_TRANSMITTER_ACTION_INIT 7
+#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
+#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
+#define ATOM_TRANSMITTER_ACTION_SETUP 10
+#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
+#define ATOM_TRANSMITTER_ACTION_POWER_ON 12
+#define ATOM_TRANSMITTER_ACTION_POWER_OFF 13
+
+// Following are used for DigTransmitterControlTable ver1.2
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+ UCHAR ucReserved:1;
+ UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+#else
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
+ UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
+ UCHAR ucReserved:1;
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V2;
+
+//ucConfig
+//Bit0
+#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
+
+//Bit1
+#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
+
+//Bit2
+#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
+
+// Bit3
+#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
+
+// Bit4
+#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
+
+// Bit7:6
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
+{
+ union
+ {
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
+ ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
+ };
+ ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
+ UCHAR ucReserved[4];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
+
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+#else
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V3;
+
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
+{
+ union
+ {
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
+ ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
+ };
+ ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig;
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
+ UCHAR ucLaneNum;
+ UCHAR ucReserved[3];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V3;
+
+//ucConfig
+//Bit0
+#define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR 0x01
+
+//Bit1
+#define ATOM_TRANSMITTER_CONFIG_V3_COHERENT 0x02
+
+//Bit2
+#define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_V3_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_V3_LINKB 0x04
+
+// Bit3
+#define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK 0x08
+#define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER 0x00
+#define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER 0x08
+
+// Bit5:4
+#define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK 0x30
+#define ATOM_TRASMITTER_CONFIG_V3_P1PLL 0x00
+#define ATOM_TRASMITTER_CONFIG_V3_P2PLL 0x10
+#define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT 0x20
+
+// Bit7:6
+#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK 0xC0
+#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1 0x00 //AB
+#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD
+#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF
+
+
+/****************************************************************************/
+// Structures used by UNIPHYTransmitterControlTable V1.4
+// ASIC Families: NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=4
+/****************************************************************************/
+typedef struct _ATOM_DP_VS_MODE_V4
+{
+ UCHAR ucLaneSel;
+ union
+ {
+ UCHAR ucLaneSet;
+ struct {
+#if ATOM_BIG_ENDIAN
+ UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
+ UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
+ UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
+#else
+ UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
+ UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
+ UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
+#endif
+ };
+ };
+}ATOM_DP_VS_MODE_V4;
+
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+#else
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V4;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
+{
+ union
+ {
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
+ ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version
+ };
+ union
+ {
+ ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
+ UCHAR ucLaneNum;
+ UCHAR ucReserved[3];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
+
+//ucConfig
+//Bit0
+#define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01
+//Bit1
+#define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02
+//Bit2
+#define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04
+// Bit3
+#define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08
+// Bit5:4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30
+#define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10
+#define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3
+// Bit7:6
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF
+
+
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReservd1:1;
+ UCHAR ucHPDSel:3;
+ UCHAR ucPhyClkSrcId:2;
+ UCHAR ucCoherentMode:1;
+ UCHAR ucReserved:1;
+#else
+ UCHAR ucReserved:1;
+ UCHAR ucCoherentMode:1;
+ UCHAR ucPhyClkSrcId:2;
+ UCHAR ucHPDSel:3;
+ UCHAR ucReservd1:1;
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V5;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+{
+ USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio
+ UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx
+ UCHAR ucLaneNum; // indicate lane number 1-8
+ UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h
+ UCHAR ucDigMode; // indicate DIG mode
+ union{
+ ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucDigEncoderSel; // indicate DIG front end encoder
+ UCHAR ucDPLaneSet;
+ UCHAR ucReserved;
+ UCHAR ucReserved1;
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
+
+//ucPhyId
+#define ATOM_PHY_ID_UNIPHYA 0
+#define ATOM_PHY_ID_UNIPHYB 1
+#define ATOM_PHY_ID_UNIPHYC 2
+#define ATOM_PHY_ID_UNIPHYD 3
+#define ATOM_PHY_ID_UNIPHYE 4
+#define ATOM_PHY_ID_UNIPHYF 5
+#define ATOM_PHY_ID_UNIPHYG 6
+
+// ucDigEncoderSel
+#define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01
+#define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02
+#define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04
+#define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08
+#define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10
+#define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20
+#define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40
+
+// ucDigMode
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP 0
+#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1
+#define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2
+#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3
+#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5
+
+// ucDPLaneSet
+#define DP_LANE_SET__0DB_0_4V 0x00
+#define DP_LANE_SET__0DB_0_6V 0x01
+#define DP_LANE_SET__0DB_0_8V 0x02
+#define DP_LANE_SET__0DB_1_2V 0x03
+#define DP_LANE_SET__3_5DB_0_4V 0x08
+#define DP_LANE_SET__3_5DB_0_6V 0x09
+#define DP_LANE_SET__3_5DB_0_8V 0x0a
+#define DP_LANE_SET__6DB_0_4V 0x10
+#define DP_LANE_SET__6DB_0_6V 0x11
+#define DP_LANE_SET__9_5DB_0_4V 0x18
+
+// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+// Bit1
+#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02
+
+// Bit3:2
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02
+
+#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04
+#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c
+// Bit6:4
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04
+
+#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+
+
+/****************************************************************************/
+// Structures used by ExternalEncoderControlTable V1.3
+// ASIC Families: Evergreen, Llano, NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
+{
+ union{
+ USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
+ USHORT usConnectorId; // connector id, valid when ucAction = INIT
+ };
+ UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucAction; //
+ UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
+ UCHAR ucReserved;
+}EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
+
+// ucAction
+#define EXTERANL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00
+#define EXTERANL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11
+#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12
+#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14
+
+// ucConfig
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MAKS 0x70
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
+{
+ EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
+ ULONG ulReserved[2];
+}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
+
+
+/****************************************************************************/
+// Structures used by DAC1OuputControlTable
+// DAC2OuputControlTable
+// LVTMAOutputControlTable (Before DEC30)
+// TMDSAOutputControlTable (Before DEC30)
+/****************************************************************************/
+typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+{
+ UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE
+ // When the display is LCD, in addition to above:
+ // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
+ // ATOM_LCD_SELFTEST_STOP
+
+ UCHAR aucPadding[3]; // padding to DWORD aligned
+}DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
+
+#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+
+
+#define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
+#define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+
+typedef struct _LVTMA_OUTPUT_CONTROL_PARAMETERS_V2
+{
+ // Possible value of ucAction
+ // ATOM_TRANSMITTER_ACTION_LCD_BLON
+ // ATOM_TRANSMITTER_ACTION_LCD_BLOFF
+ // ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL
+ // ATOM_TRANSMITTER_ACTION_POWER_ON
+ // ATOM_TRANSMITTER_ACTION_POWER_OFF
+ UCHAR ucAction;
+ UCHAR ucBriLevel;
+ USHORT usPwmFreq; // in unit of Hz, 200 means 200Hz
+}LVTMA_OUTPUT_CONTROL_PARAMETERS_V2;
+
+
+
+/****************************************************************************/
+// Structures used by BlankCRTCTable
+/****************************************************************************/
+typedef struct _BLANK_CRTC_PARAMETERS
+{
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucBlanking; // ATOM_BLANKING or ATOM_BLANKINGOFF
+ USHORT usBlackColorRCr;
+ USHORT usBlackColorGY;
+ USHORT usBlackColorBCb;
+}BLANK_CRTC_PARAMETERS;
+#define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
+
+/****************************************************************************/
+// Structures used by EnableCRTCTable
+// EnableCRTCMemReqTable
+// UpdateCRTC_DoubleBufferRegistersTable
+/****************************************************************************/
+typedef struct _ENABLE_CRTC_PARAMETERS
+{
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[2];
+}ENABLE_CRTC_PARAMETERS;
+#define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
+
+/****************************************************************************/
+// Structures used by SetCRTC_OverScanTable
+/****************************************************************************/
+typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
+{
+ USHORT usOverscanRight; // right
+ USHORT usOverscanLeft; // left
+ USHORT usOverscanBottom; // bottom
+ USHORT usOverscanTop; // top
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucPadding[3];
+}SET_CRTC_OVERSCAN_PARAMETERS;
+#define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
+
+/****************************************************************************/
+// Structures used by SetCRTC_ReplicationTable
+/****************************************************************************/
+typedef struct _SET_CRTC_REPLICATION_PARAMETERS
+{
+ UCHAR ucH_Replication; // horizontal replication
+ UCHAR ucV_Replication; // vertical replication
+ UCHAR usCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucPadding;
+}SET_CRTC_REPLICATION_PARAMETERS;
+#define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
+
+/****************************************************************************/
+// Structures used by SelectCRTC_SourceTable
+/****************************************************************************/
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
+{
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucDevice; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
+ UCHAR ucPadding[2];
+}SELECT_CRTC_SOURCE_PARAMETERS;
+#define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
+
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
+{
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
+ UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO
+ UCHAR ucPadding;
+}SELECT_CRTC_SOURCE_PARAMETERS_V2;
+
+//ucEncoderID
+//#define ASIC_INT_DAC1_ENCODER_ID 0x00
+//#define ASIC_INT_TV_ENCODER_ID 0x02
+//#define ASIC_INT_DIG1_ENCODER_ID 0x03
+//#define ASIC_INT_DAC2_ENCODER_ID 0x04
+//#define ASIC_EXT_TV_ENCODER_ID 0x06
+//#define ASIC_INT_DVO_ENCODER_ID 0x07
+//#define ASIC_INT_DIG2_ENCODER_ID 0x09
+//#define ASIC_EXT_DIG_ENCODER_ID 0x05
+
+//ucEncodeMode
+//#define ATOM_ENCODER_MODE_DP 0
+//#define ATOM_ENCODER_MODE_LVDS 1
+//#define ATOM_ENCODER_MODE_DVI 2
+//#define ATOM_ENCODER_MODE_HDMI 3
+//#define ATOM_ENCODER_MODE_SDVO 4
+//#define ATOM_ENCODER_MODE_TV 13
+//#define ATOM_ENCODER_MODE_CV 14
+//#define ATOM_ENCODER_MODE_CRT 15
+
+
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V3
+{
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
+ UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO
+ UCHAR ucDstBpc; // PANEL_6/8/10/12BIT_PER_COLOR
+}SELECT_CRTC_SOURCE_PARAMETERS_V3;
+
+
+/****************************************************************************/
+// Structures used by SetPixelClockTable
+// GetPixelClockTable
+/****************************************************************************/
+//Major revision=1., Minor revision=1
+typedef struct _PIXEL_CLOCK_PARAMETERS
+{
+ USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
+ // 0 means disable PPLL
+ USHORT usRefDiv; // Reference divider
+ USHORT usFbDiv; // feedback divider
+ UCHAR ucPostDiv; // post divider
+ UCHAR ucFracFbDiv; // fractional feedback divider
+ UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
+ UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
+ UCHAR ucCRTC; // Which CRTC uses this Ppll
+ UCHAR ucPadding;
+}PIXEL_CLOCK_PARAMETERS;
+
+//Major revision=1., Minor revision=2, add ucMiscIfno
+//ucMiscInfo:
+#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
+#define MISC_DEVICE_INDEX_MASK 0xF0
+#define MISC_DEVICE_INDEX_SHIFT 4
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V2
+{
+ USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
+ // 0 means disable PPLL
+ USHORT usRefDiv; // Reference divider
+ USHORT usFbDiv; // feedback divider
+ UCHAR ucPostDiv; // post divider
+ UCHAR ucFracFbDiv; // fractional feedback divider
+ UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
+ UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
+ UCHAR ucCRTC; // Which CRTC uses this Ppll
+ UCHAR ucMiscInfo; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
+}PIXEL_CLOCK_PARAMETERS_V2;
+
+//Major revision=1., Minor revision=3, structure/definition change
+//ucEncoderMode:
+//ATOM_ENCODER_MODE_DP
+//ATOM_ENOCDER_MODE_LVDS
+//ATOM_ENOCDER_MODE_DVI
+//ATOM_ENOCDER_MODE_HDMI
+//ATOM_ENOCDER_MODE_SDVO
+//ATOM_ENCODER_MODE_TV 13
+//ATOM_ENCODER_MODE_CV 14
+//ATOM_ENCODER_MODE_CRT 15
+
+//ucDVOConfig
+//#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
+//#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
+//#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
+//#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
+//#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
+//#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
+//#define DVO_ENCODER_CONFIG_24BIT 0x08
+
+//ucMiscInfo: also changed, see below
+#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
+#define PIXEL_CLOCK_MISC_VGA_MODE 0x02
+#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
+#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
+#define PIXEL_CLOCK_MISC_REF_DIV_SRC 0x10
+// V1.4 for RoadRunner
+#define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10
+#define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20
+
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V3
+{
+ USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
+ // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
+ USHORT usRefDiv; // Reference divider
+ USHORT usFbDiv; // feedback divider
+ UCHAR ucPostDiv; // post divider
+ UCHAR ucFracFbDiv; // fractional feedback divider
+ UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
+ UCHAR ucTransmitterId; // graphic encoder id defined in objectId.h
+ union
+ {
+ UCHAR ucEncoderMode; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
+ UCHAR ucDVOConfig; // when use DVO, need to know SDR/DDR, 12bit or 24bit
+ };
+ UCHAR ucMiscInfo; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
+ // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
+ // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider
+}PIXEL_CLOCK_PARAMETERS_V3;
+
+#define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
+#define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
+
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V5
+{
+ UCHAR ucCRTC; // ATOM_CRTC1~6, indicate the CRTC controller to
+ // drive the pixel clock. not used for DCPLL case.
+ union{
+ UCHAR ucReserved;
+ UCHAR ucFracFbDiv; // [gphan] temporary to prevent build problem. remove it after driver code is changed.
+ };
+ USHORT usPixelClock; // target the pixel clock to drive the CRTC timing
+ // 0 means disable PPLL/DCPLL.
+ USHORT usFbDiv; // feedback divider integer part.
+ UCHAR ucPostDiv; // post divider.
+ UCHAR ucRefDiv; // Reference divider
+ UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
+ UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h,
+ // indicate which graphic encoder will be used.
+ UCHAR ucEncoderMode; // Encoder mode:
+ UCHAR ucMiscInfo; // bit[0]= Force program PPLL
+ // bit[1]= when VGA timing is used.
+ // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
+ // bit[4]= RefClock source for PPLL.
+ // =0: XTLAIN( default mode )
+ // =1: other external clock source, which is pre-defined
+ // by VBIOS depend on the feature required.
+ // bit[7:5]: reserved.
+ ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
+
+}PIXEL_CLOCK_PARAMETERS_V5;
+
+#define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL 0x01
+#define PIXEL_CLOCK_V5_MISC_VGA_MODE 0x02
+#define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK 0x0c
+#define PIXEL_CLOCK_V5_MISC_HDMI_24BPP 0x00
+#define PIXEL_CLOCK_V5_MISC_HDMI_30BPP 0x04
+#define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08
+#define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10
+
+typedef struct _CRTC_PIXEL_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
+ // drive the pixel clock. not used for DCPLL case.
+ ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
+ // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+#else
+ ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
+ // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+ ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
+ // drive the pixel clock. not used for DCPLL case.
+#endif
+}CRTC_PIXEL_CLOCK_FREQ;
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V6
+{
+ union{
+ CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency
+ ULONG ulDispEngClkFreq; // dispclk frequency
+ };
+ USHORT usFbDiv; // feedback divider integer part.
+ UCHAR ucPostDiv; // post divider.
+ UCHAR ucRefDiv; // Reference divider
+ UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
+ UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h,
+ // indicate which graphic encoder will be used.
+ UCHAR ucEncoderMode; // Encoder mode:
+ UCHAR ucMiscInfo; // bit[0]= Force program PPLL
+ // bit[1]= when VGA timing is used.
+ // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
+ // bit[4]= RefClock source for PPLL.
+ // =0: XTLAIN( default mode )
+ // =1: other external clock source, which is pre-defined
+ // by VBIOS depend on the feature required.
+ // bit[7:5]: reserved.
+ ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
+
+}PIXEL_CLOCK_PARAMETERS_V6;
+
+#define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01
+#define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02
+#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c
+#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00
+#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04
+#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1)
+#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08
+#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4)
+#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c
+#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10
+#define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40
+#define PIXEL_CLOCK_V6_MISC_DPREFCLK_BYPASS 0x40
+
+typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
+{
+ PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
+}GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2;
+
+typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2
+{
+ UCHAR ucStatus;
+ UCHAR ucRefDivSrc; // =1: reference clock source from XTALIN, =0: source from PCIE ref clock
+ UCHAR ucReserved[2];
+}GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2;
+
+typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3
+{
+ PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput;
+}GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3;
+
+
+/****************************************************************************/
+// Structures used by AdjustDisplayPllTable
+/****************************************************************************/
+typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
+{
+ USHORT usPixelClock;
+ UCHAR ucTransmitterID;
+ UCHAR ucEncodeMode;
+ union
+ {
+ UCHAR ucDVOConfig; //if DVO, need passing link rate and output 12bitlow or 24bit
+ UCHAR ucConfig; //if none DVO, not defined yet
+ };
+ UCHAR ucReserved[3];
+}ADJUST_DISPLAY_PLL_PARAMETERS;
+
+#define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
+#define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
+
+typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
+{
+ USHORT usPixelClock; // target pixel clock
+ UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h
+ UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI
+ UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
+ UCHAR ucExtTransmitterID; // external encoder id.
+ UCHAR ucReserved[2];
+}ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
+
+// usDispPllConfig v1.2 for RoadRunner
+#define DISPPLL_CONFIG_DVO_RATE_SEL 0x0001 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_DDR_SPEED 0x0000 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_SDR_SPEED 0x0001 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_OUTPUT_SEL 0x000c // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_LOW12BIT 0x0000 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_UPPER12BIT 0x0004 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_DVO_24BIT 0x0008 // need only when ucTransmitterID = DVO
+#define DISPPLL_CONFIG_SS_ENABLE 0x0010 // Only used when ucEncoderMode = DP or LVDS
+#define DISPPLL_CONFIG_COHERENT_MODE 0x0020 // Only used when ucEncoderMode = TMDS or HDMI
+#define DISPPLL_CONFIG_DUAL_LINK 0x0040 // Only used when ucEncoderMode = TMDS or LVDS
+
+
+typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3
+{
+ ULONG ulDispPllFreq; // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc
+ UCHAR ucRefDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given )
+ UCHAR ucPostDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider
+ UCHAR ucReserved[2];
+}ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3;
+
+typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3
+{
+ union
+ {
+ ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 sInput;
+ ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput;
+ };
+} ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3;
+
+/****************************************************************************/
+// Structures used by EnableYUVTable
+/****************************************************************************/
+typedef struct _ENABLE_YUV_PARAMETERS
+{
+ UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
+ UCHAR ucCRTC; // Which CRTC needs this YUV or RGB format
+ UCHAR ucPadding[2];
+}ENABLE_YUV_PARAMETERS;
+#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
+
+/****************************************************************************/
+// Structures used by GetMemoryClockTable
+/****************************************************************************/
+typedef struct _GET_MEMORY_CLOCK_PARAMETERS
+{
+ ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit
+} GET_MEMORY_CLOCK_PARAMETERS;
+#define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
+
+/****************************************************************************/
+// Structures used by GetEngineClockTable
+/****************************************************************************/
+typedef struct _GET_ENGINE_CLOCK_PARAMETERS
+{
+ ULONG ulReturnEngineClock; // current engine speed in 10KHz unit
+} GET_ENGINE_CLOCK_PARAMETERS;
+#define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
+
+/****************************************************************************/
+// Following Structures and constant may be obsolete
+/****************************************************************************/
+//Maxium 8 bytes,the data read in will be placed in the parameter space.
+//Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
+typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
+{
+ USHORT usPrescale; //Ratio between Engine clock and I2C clock
+ USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID
+ USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
+ //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
+ UCHAR ucSlaveAddr; //Read from which slave
+ UCHAR ucLineNumber; //Read from which HW assisted line
+}READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
+#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
+
+
+#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
+#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
+#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
+#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
+#define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
+
+typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+{
+ USHORT usPrescale; //Ratio between Engine clock and I2C clock
+ USHORT usByteOffset; //Write to which byte
+ //Upper portion of usByteOffset is Format of data
+ //1bytePS+offsetPS
+ //2bytesPS+offsetPS
+ //blockID+offsetPS
+ //blockID+offsetID
+ //blockID+counterID+offsetID
+ UCHAR ucData; //PS data1
+ UCHAR ucStatus; //Status byte 1=success, 2=failure, Also is used as PS data2
+ UCHAR ucSlaveAddr; //Write to which slave
+ UCHAR ucLineNumber; //Write from which HW assisted line
+}WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
+
+#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
+{
+ USHORT usPrescale; //Ratio between Engine clock and I2C clock
+ UCHAR ucSlaveAddr; //Write to which slave
+ UCHAR ucLineNumber; //Write from which HW assisted line
+}SET_UP_HW_I2C_DATA_PARAMETERS;
+
+/**************************************************************************/
+#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+
+/****************************************************************************/
+// Structures used by PowerConnectorDetectionTable
+/****************************************************************************/
+typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS
+{
+ UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
+ UCHAR ucPwrBehaviorId;
+ USHORT usPwrBudget; //how much power currently boot to in unit of watt
+}POWER_CONNECTOR_DETECTION_PARAMETERS;
+
+typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
+{
+ UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
+ UCHAR ucReserved;
+ USHORT usPwrBudget; //how much power currently boot to in unit of watt
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+}POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
+
+
+/****************************LVDS SS Command Table Definitions**********************/
+
+/****************************************************************************/
+// Structures used by EnableSpreadSpectrumOnPPLLTable
+/****************************************************************************/
+typedef struct _ENABLE_LVDS_SS_PARAMETERS
+{
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
+ UCHAR ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
+ UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[3];
+}ENABLE_LVDS_SS_PARAMETERS;
+
+//ucTableFormatRevision=1,ucTableContentRevision=2
+typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2
+{
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
+ UCHAR ucSpreadSpectrumStep; //
+ UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucSpreadSpectrumDelay;
+ UCHAR ucSpreadSpectrumRange;
+ UCHAR ucPadding;
+}ENABLE_LVDS_SS_PARAMETERS_V2;
+
+//This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
+typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL
+{
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
+ UCHAR ucSpreadSpectrumStep; //
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucSpreadSpectrumDelay;
+ UCHAR ucSpreadSpectrumRange;
+ UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2
+}ENABLE_SPREAD_SPECTRUM_ON_PPLL;
+
+ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
+{
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
+ // Bit[1]: 1-Ext. 0-Int.
+ // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
+ // Bits[7:4] reserved
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
+ USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC
+}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2;
+
+#define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD 0x00
+#define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD 0x01
+#define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD 0x02
+#define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK 0x0c
+#define ATOM_PPLL_SS_TYPE_V2_P1PLL 0x00
+#define ATOM_PPLL_SS_TYPE_V2_P2PLL 0x04
+#define ATOM_PPLL_SS_TYPE_V2_DCPLL 0x08
+#define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK 0x00FF
+#define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT 0
+#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00
+#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8
+
+// Used by DCE5.0
+ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
+{
+ USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0
+ UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
+ // Bit[1]: 1-Ext. 0-Int.
+ // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
+ // Bits[7:4] reserved
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
+ USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC
+}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
+
+
+#define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00
+#define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01
+#define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02
+#define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c
+#define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00
+#define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04
+#define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08
+#define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8
+
+#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
+{
+ PIXEL_CLOCK_PARAMETERS sPCLKInput;
+ ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion
+}SET_PIXEL_CLOCK_PS_ALLOCATION;
+
+
+
+#define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
+
+/****************************************************************************/
+// Structures used by ###
+/****************************************************************************/
+typedef struct _MEMORY_TRAINING_PARAMETERS
+{
+ ULONG ulTargetMemoryClock; //In 10Khz unit
+}MEMORY_TRAINING_PARAMETERS;
+#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
+
+
+typedef struct _MEMORY_TRAINING_PARAMETERS_V1_2
+{
+ USHORT usMemTrainingMode;
+ USHORT usReserved;
+}MEMORY_TRAINING_PARAMETERS_V1_2;
+
+//usMemTrainingMode
+#define NORMAL_MEMORY_TRAINING_MODE 0
+#define ENTER_DRAM_SELFREFRESH_MODE 1
+#define EXIT_DRAM_SELFRESH_MODE 2
+
+/****************************LVDS and other encoder command table definitions **********************/
+
+
+/****************************************************************************/
+// Structures used by LVDSEncoderControlTable (Before DEC30)
+// LVTMAEncoderControlTable (Before DEC30)
+// TMDSAEncoderControlTable (Before DEC30)
+/****************************************************************************/
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ UCHAR ucMisc; // bit0=0: Enable single link
+ // =1: Enable dual link
+ // Bit1=0: 666RGB
+ // =1: 888RGB
+ UCHAR ucAction; // 0: turn off encoder
+ // 1: setup and turn on encoder
+}LVDS_ENCODER_CONTROL_PARAMETERS;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
+
+//ucTableFormatRevision=1,ucTableContentRevision=2
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ UCHAR ucMisc; // see PANEL_ENCODER_MISC_xx defintions below
+ UCHAR ucAction; // 0: turn off encoder
+ // 1: setup and turn on encoder
+ UCHAR ucTruncate; // bit0=0: Disable truncate
+ // =1: Enable truncate
+ // bit4=0: 666RGB
+ // =1: 888RGB
+ UCHAR ucSpatial; // bit0=0: Disable spatial dithering
+ // =1: Enable spatial dithering
+ // bit4=0: 666RGB
+ // =1: 888RGB
+ UCHAR ucTemporal; // bit0=0: Disable temporal dithering
+ // =1: Enable temporal dithering
+ // bit4=0: 666RGB
+ // =1: 888RGB
+ // bit5=0: Gray level 2
+ // =1: Gray level 4
+ UCHAR ucFRC; // bit4=0: 25FRC_SEL pattern E
+ // =1: 25FRC_SEL pattern F
+ // bit6:5=0: 50FRC_SEL pattern A
+ // =1: 50FRC_SEL pattern B
+ // =2: 50FRC_SEL pattern C
+ // =3: 50FRC_SEL pattern D
+ // bit7=0: 75FRC_SEL pattern E
+ // =1: 75FRC_SEL pattern F
+}LVDS_ENCODER_CONTROL_PARAMETERS_V2;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
+
+
+#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
+
+/****************************************************************************/
+// Structures used by ###
+/****************************************************************************/
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
+{
+ UCHAR ucEnable; // Enable or Disable External TMDS encoder
+ UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
+ UCHAR ucPadding[2];
+}ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
+
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
+{
+ ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
+}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
+
+#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
+{
+ ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
+}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
+{
+ DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
+
+/****************************************************************************/
+// Structures used by DVOEncoderControlTable
+/****************************************************************************/
+//ucTableFormatRevision=1,ucTableContentRevision=3
+//ucDVOConfig:
+#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
+#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
+#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
+#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
+#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
+#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
+#define DVO_ENCODER_CONFIG_24BIT 0x08
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
+{
+ USHORT usPixelClock;
+ UCHAR ucDVOConfig;
+ UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
+ UCHAR ucReseved[4];
+}DVO_ENCODER_CONTROL_PARAMETERS_V3;
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4
+{
+ USHORT usPixelClock;
+ UCHAR ucDVOConfig;
+ UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
+ UCHAR ucBitPerColor; //please refer to definition of PANEL_xBIT_PER_COLOR
+ UCHAR ucReseved[3];
+}DVO_ENCODER_CONTROL_PARAMETERS_V1_4;
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4 DVO_ENCODER_CONTROL_PARAMETERS_V1_4
+
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
+// bit1=0: non-coherent mode
+// =1: coherent mode
+
+//==========================================================================================
+//Only change is here next time when changing encoder parameter definitions again!
+#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
+
+//==========================================================================================
+#define PANEL_ENCODER_MISC_DUAL 0x01
+#define PANEL_ENCODER_MISC_COHERENT 0x02
+#define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
+#define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
+
+#define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
+#define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
+#define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
+
+#define PANEL_ENCODER_TRUNCATE_EN 0x01
+#define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
+#define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
+#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
+#define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
+#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
+#define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
+#define PANEL_ENCODER_25FRC_MASK 0x10
+#define PANEL_ENCODER_25FRC_E 0x00
+#define PANEL_ENCODER_25FRC_F 0x10
+#define PANEL_ENCODER_50FRC_MASK 0x60
+#define PANEL_ENCODER_50FRC_A 0x00
+#define PANEL_ENCODER_50FRC_B 0x20
+#define PANEL_ENCODER_50FRC_C 0x40
+#define PANEL_ENCODER_50FRC_D 0x60
+#define PANEL_ENCODER_75FRC_MASK 0x80
+#define PANEL_ENCODER_75FRC_E 0x00
+#define PANEL_ENCODER_75FRC_F 0x80
+
+/****************************************************************************/
+// Structures used by SetVoltageTable
+/****************************************************************************/
+#define SET_VOLTAGE_TYPE_ASIC_VDDC 1
+#define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
+#define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
+#define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
+#define SET_VOLTAGE_INIT_MODE 5
+#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic
+
+#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
+
+#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
+#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
+#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
+
+typedef struct _SET_VOLTAGE_PARAMETERS
+{
+ UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
+ UCHAR ucVoltageMode; // To set all, to set source A or source B or ...
+ UCHAR ucVoltageIndex; // An index to tell which voltage level
+ UCHAR ucReserved;
+}SET_VOLTAGE_PARAMETERS;
+
+typedef struct _SET_VOLTAGE_PARAMETERS_V2
+{
+ UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
+ UCHAR ucVoltageMode; // Not used, maybe use for state machine for differen power mode
+ USHORT usVoltageLevel; // real voltage level
+}SET_VOLTAGE_PARAMETERS_V2;
+
+// used by both SetVoltageTable v1.3 and v1.4
+typedef struct _SET_VOLTAGE_PARAMETERS_V1_3
+{
+ UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Indicate action: Set voltage level
+ USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
+}SET_VOLTAGE_PARAMETERS_V1_3;
+
+//ucVoltageType
+#define VOLTAGE_TYPE_VDDC 1
+#define VOLTAGE_TYPE_MVDDC 2
+#define VOLTAGE_TYPE_MVDDQ 3
+#define VOLTAGE_TYPE_VDDCI 4
+#define VOLTAGE_TYPE_VDDGFX 5
+#define VOLTAGE_TYPE_PCC 6
+
+#define VOLTAGE_TYPE_GENERIC_I2C_1 0x11
+#define VOLTAGE_TYPE_GENERIC_I2C_2 0x12
+#define VOLTAGE_TYPE_GENERIC_I2C_3 0x13
+#define VOLTAGE_TYPE_GENERIC_I2C_4 0x14
+#define VOLTAGE_TYPE_GENERIC_I2C_5 0x15
+#define VOLTAGE_TYPE_GENERIC_I2C_6 0x16
+#define VOLTAGE_TYPE_GENERIC_I2C_7 0x17
+#define VOLTAGE_TYPE_GENERIC_I2C_8 0x18
+#define VOLTAGE_TYPE_GENERIC_I2C_9 0x19
+#define VOLTAGE_TYPE_GENERIC_I2C_10 0x1A
+
+//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
+#define ATOM_SET_VOLTAGE 0 //Set voltage Level
+#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator
+#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase, only for SVID/PVID regulator
+#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used from SetVoltageTable v1.3
+#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4
+#define ATOM_GET_LEAKAGE_ID 8 //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4
+
+// define vitual voltage id in usVoltageLevel
+#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01
+#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02
+#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03
+#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04
+#define ATOM_VIRTUAL_VOLTAGE_ID4 0xff05
+#define ATOM_VIRTUAL_VOLTAGE_ID5 0xff06
+#define ATOM_VIRTUAL_VOLTAGE_ID6 0xff07
+#define ATOM_VIRTUAL_VOLTAGE_ID7 0xff08
+
+typedef struct _SET_VOLTAGE_PS_ALLOCATION
+{
+ SET_VOLTAGE_PARAMETERS sASICSetVoltage;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+}SET_VOLTAGE_PS_ALLOCATION;
+
+// New Added from SI for GetVoltageInfoTable, input parameter structure
+typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
+{
+ UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info
+ USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
+ ULONG ulReserved;
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
+typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+ ULONG ulVotlageGpioState;
+ ULONG ulVoltageGPioMask;
+}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
+typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+ USHORT usVoltageLevel;
+ USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator
+ ULONG ulReseved;
+}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+// GetVoltageInfo v1.1 ucVoltageMode
+#define ATOM_GET_VOLTAGE_VID 0x00
+#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03
+#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04
+#define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info
+
+// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
+#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
+// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
+#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
+
+#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
+#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
+
+
+// New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure
+typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2
+{
+ UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info
+ USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
+ ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2;
+
+// New in GetVoltageInfo v1.2 ucVoltageMode
+#define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09
+
+// New Added from CI Hawaii for EVV feature
+typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2
+{
+ USHORT usVoltageLevel; // real voltage level in unit of mv
+ USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator
+ USHORT usTDP_Current; // TDP_Current in unit of 0.01A
+ USHORT usTDP_Power; // TDP_Current in unit of 0.1W
+}GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2;
+
+/****************************************************************************/
+// Structures used by TVEncoderControlTable
+/****************************************************************************/
+typedef struct _TV_ENCODER_CONTROL_PARAMETERS
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..."
+ UCHAR ucAction; // 0: turn off encoder
+ // 1: setup and turn on encoder
+}TV_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
+{
+ TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; // Don't set this one
+}TV_ENCODER_CONTROL_PS_ALLOCATION;
+
+//==============================Data Table Portion====================================
+
+
+/****************************************************************************/
+// Structure used in Data.mtb
+/****************************************************************************/
+typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
+{
+ USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position!
+ USHORT MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
+ USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
+ USHORT StandardVESA_Timing; // Only used by Bios
+ USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4
+ USHORT PaletteData; // Only used by BIOS
+ USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info
+ USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1
+ USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1
+ USHORT SupportedDevicesInfo; // Will be obsolete from R600
+ USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600
+ USHORT VRAM_UsageByFirmware; // Shared by various SW components,latest version 1.3 will be used from R600
+ USHORT GPIO_Pin_LUT; // Shared by various SW components,latest version 1.1
+ USHORT VESA_ToInternalModeLUT; // Only used by Bios
+ USHORT ComponentVideoInfo; // Shared by various SW components,latest version 2.1 will be used from R600
+ USHORT PowerPlayInfo; // Shared by various SW components,latest version 2.1,new design from R600
+ USHORT GPUVirtualizationInfo; // Will be obsolete from R600
+ USHORT SaveRestoreInfo; // Only used by Bios
+ USHORT PPLL_SS_Info; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
+ USHORT OemInfo; // Defined and used by external SW, should be obsolete soon
+ USHORT XTMDS_Info; // Will be obsolete from R600
+ USHORT MclkSS_Info; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
+ USHORT Object_Header; // Shared by various SW components,latest version 1.1
+ USHORT IndirectIOAccess; // Only used by Bios,this table position can't change at all!!
+ USHORT MC_InitParameter; // Only used by command table
+ USHORT ASIC_VDDC_Info; // Will be obsolete from R600
+ USHORT ASIC_InternalSS_Info; // New tabel name from R600, used to be called "ASIC_MVDDC_Info"
+ USHORT TV_VideoMode; // Only used by command table
+ USHORT VRAM_Info; // Only used by command table, latest version 1.3
+ USHORT MemoryTrainingInfo; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
+ USHORT IntegratedSystemInfo; // Shared by various SW components
+ USHORT ASIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
+ USHORT VoltageObjectInfo; // Shared by various SW components, latest version 1.1
+ USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1
+ USHORT ServiceInfo;
+}ATOM_MASTER_LIST_OF_DATA_TABLES;
+
+typedef struct _ATOM_MASTER_DATA_TABLE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
+}ATOM_MASTER_DATA_TABLE;
+
+// For backward compatible
+#define LVDS_Info LCD_Info
+#define DAC_Info PaletteData
+#define TMDS_Info DIGTransmitterInfo
+#define CompassionateData GPUVirtualizationInfo
+
+/****************************************************************************/
+// Structure used in MultimediaCapabilityInfoTable
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulSignature; // HW info table signature string "$ATI"
+ UCHAR ucI2C_Type; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
+ UCHAR ucTV_OutInfo; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
+ UCHAR ucVideoPortInfo; // Provides the video port capabilities
+ UCHAR ucHostPortInfo; // Provides host port configuration information
+}ATOM_MULTIMEDIA_CAPABILITY_INFO;
+
+
+/****************************************************************************/
+// Structure used in MultimediaConfigInfoTable
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulSignature; // MM info table signature sting "$MMT"
+ UCHAR ucTunerInfo; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
+ UCHAR ucAudioChipInfo; // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
+ UCHAR ucProductID; // Defines as OEM ID or ATI board ID dependent on product type setting
+ UCHAR ucMiscInfo1; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
+ UCHAR ucMiscInfo2; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
+ UCHAR ucMiscInfo3; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
+ UCHAR ucMiscInfo4; // Video Decoder Host Config (2:0) reserved (7:3)
+ UCHAR ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
+ UCHAR ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
+ UCHAR ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
+ UCHAR ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
+ UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
+}ATOM_MULTIMEDIA_CONFIG_INFO;
+
+
+/****************************************************************************/
+// Structures used in FirmwareInfoTable
+/****************************************************************************/
+
+// usBIOSCapability Defintion:
+// Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
+// Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
+// Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
+// Others: Reserved
+#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
+#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
+#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
+#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008 // (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable.
+#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010 // (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable.
+#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
+#define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
+#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
+#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
+#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
+#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
+#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
+#define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT 0x0008 // (valid from v2.1 ): =1: memclk ss enable with external ss chip
+#define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT 0x0010 // (valid from v2.1 ): =1: engclk ss enable with external ss chip
+
+
+#ifndef _H2INC
+
+//Please don't add or expand this bitfield structure below, this one will retire soon.!
+typedef struct _ATOM_FIRMWARE_CAPABILITY
+{
+#if ATOM_BIG_ENDIAN
+ USHORT Reserved:1;
+ USHORT SCL2Redefined:1;
+ USHORT PostWithoutModeSet:1;
+ USHORT HyperMemory_Size:4;
+ USHORT HyperMemory_Support:1;
+ USHORT PPMode_Assigned:1;
+ USHORT WMI_SUPPORT:1;
+ USHORT GPUControlsBL:1;
+ USHORT EngineClockSS_Support:1;
+ USHORT MemoryClockSS_Support:1;
+ USHORT ExtendedDesktopSupport:1;
+ USHORT DualCRTC_Support:1;
+ USHORT FirmwarePosted:1;
+#else
+ USHORT FirmwarePosted:1;
+ USHORT DualCRTC_Support:1;
+ USHORT ExtendedDesktopSupport:1;
+ USHORT MemoryClockSS_Support:1;
+ USHORT EngineClockSS_Support:1;
+ USHORT GPUControlsBL:1;
+ USHORT WMI_SUPPORT:1;
+ USHORT PPMode_Assigned:1;
+ USHORT HyperMemory_Support:1;
+ USHORT HyperMemory_Size:4;
+ USHORT PostWithoutModeSet:1;
+ USHORT SCL2Redefined:1;
+ USHORT Reserved:1;
+#endif
+}ATOM_FIRMWARE_CAPABILITY;
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
+{
+ ATOM_FIRMWARE_CAPABILITY sbfAccess;
+ USHORT susAccess;
+}ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#else
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
+{
+ USHORT susAccess;
+}ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#endif
+
+typedef struct _ATOM_FIRMWARE_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulDriverTargetEngineClock; //In 10Khz unit
+ ULONG ulDriverTargetMemoryClock; //In 10Khz unit
+ ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulASICMaxEngineClock; //In 10Khz unit
+ ULONG ulASICMaxMemoryClock; //In 10Khz unit
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucPadding[3]; //Don't use them
+ ULONG aulReservedForBIOS[3]; //Don't use them
+ USHORT usMinEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Output; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
+ USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMinPixelClockPLL_Output; //In 10Khz unit, the definitions above can't change!!!
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; //In 10Khz unit
+ USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
+ UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
+ UCHAR ucDesign_ID; //Indicate what is the board design
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+}ATOM_FIRMWARE_INFO;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulDriverTargetEngineClock; //In 10Khz unit
+ ULONG ulDriverTargetMemoryClock; //In 10Khz unit
+ ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulASICMaxEngineClock; //In 10Khz unit
+ ULONG ulASICMaxMemoryClock; //In 10Khz unit
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ UCHAR ucPadding[2]; //Don't use them
+ ULONG aulReservedForBIOS[2]; //Don't use them
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Output; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
+ USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; //In 10Khz unit
+ USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
+ UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
+ UCHAR ucDesign_ID; //Indicate what is the board design
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+}ATOM_FIRMWARE_INFO_V1_2;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulDriverTargetEngineClock; //In 10Khz unit
+ ULONG ulDriverTargetMemoryClock; //In 10Khz unit
+ ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulASICMaxEngineClock; //In 10Khz unit
+ ULONG ulASICMaxMemoryClock; //In 10Khz unit
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ UCHAR ucPadding[2]; //Don't use them
+ ULONG aulReservedForBIOS; //Don't use them
+ ULONG ul3DAccelerationEngineClock;//In 10Khz unit
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Output; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
+ USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; //In 10Khz unit
+ USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
+ UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
+ UCHAR ucDesign_ID; //Indicate what is the board design
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+}ATOM_FIRMWARE_INFO_V1_3;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_4
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulDriverTargetEngineClock; //In 10Khz unit
+ ULONG ulDriverTargetMemoryClock; //In 10Khz unit
+ ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulASICMaxEngineClock; //In 10Khz unit
+ ULONG ulASICMaxMemoryClock; //In 10Khz unit
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ USHORT usBootUpVDDCVoltage; //In MV unit
+ USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
+ USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
+ ULONG ul3DAccelerationEngineClock;//In 10Khz unit
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Output; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
+ USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; //In 10Khz unit
+ USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
+ UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
+ UCHAR ucDesign_ID; //Indicate what is the board design
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+}ATOM_FIRMWARE_INFO_V1_4;
+
+//the structure below to be used from Cypress
+typedef struct _ATOM_FIRMWARE_INFO_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulReserved1;
+ ULONG ulReserved2;
+ ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock
+ ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit
+ UCHAR ucReserved1; //Was ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ USHORT usBootUpVDDCVoltage; //In MV unit
+ USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
+ USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
+ ULONG ulReserved4; //Was ulAsicMaximumVoltage
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
+ USHORT usMinEngineClockPLL_Output; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
+ USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
+ USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usCoreReferenceClock; //In 10Khz unit
+ USHORT usMemoryReferenceClock; //In 10Khz unit
+ USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+ UCHAR ucReserved4[3];
+
+}ATOM_FIRMWARE_INFO_V2_1;
+
+//the structure below to be used from NI
+//ucTableFormatRevision=2
+//ucTableContentRevision=2
+
+typedef struct _PRODUCT_BRANDING
+{
+ UCHAR ucEMBEDDED_CAP:2; // Bit[1:0] Embedded feature level
+ UCHAR ucReserved:2; // Bit[3:2] Reserved
+ UCHAR ucBRANDING_ID:4; // Bit[7:4] Branding ID
+}PRODUCT_BRANDING;
+
+typedef struct _ATOM_FIRMWARE_INFO_V2_2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulSPLL_OutputFreq; //In 10Khz unit
+ ULONG ulGPUPLL_OutputFreq; //In 10Khz unit
+ ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
+ ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ?
+ ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.
+ UCHAR ucReserved3; //Was ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ USHORT usBootUpVDDCVoltage; //In MV unit
+ USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
+ USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
+ ULONG ulReserved4; //Was ulAsicMaximumVoltage
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ UCHAR ucRemoteDisplayConfig;
+ UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+ ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
+ ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
+ USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usCoreReferenceClock; //In 10Khz unit
+ USHORT usMemoryReferenceClock; //In 10Khz unit
+ USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+ UCHAR ucCoolingSolution_ID; //0: Air cooling; 1: Liquid cooling ... [COOLING_SOLUTION]
+ PRODUCT_BRANDING ucProductBranding; // Bit[7:4]ucBRANDING_ID: Branding ID, Bit[3:2]ucReserved: Reserved, Bit[1:0]ucEMBEDDED_CAP: Embedded feature level.
+ UCHAR ucReserved9;
+ USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
+ USHORT usBootUpVDDGFXVoltage; //In unit of mv;
+ ULONG ulReserved10[3]; // New added comparing to previous version
+}ATOM_FIRMWARE_INFO_V2_2;
+
+#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2
+
+
+// definition of ucRemoteDisplayConfig
+#define REMOTE_DISPLAY_DISABLE 0x00
+#define REMOTE_DISPLAY_ENABLE 0x01
+
+/****************************************************************************/
+// Structures used in IntegratedSystemInfoTable
+/****************************************************************************/
+#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
+#define IGP_CAP_FLAG_AC_CARD 0x4
+#define IGP_CAP_FLAG_SDVO_CARD 0x8
+#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock; //in 10kHz unit
+ ULONG ulBootUpMemoryClock; //in 10kHz unit
+ ULONG ulMaxSystemMemoryClock; //in 10kHz unit
+ ULONG ulMinSystemMemoryClock; //in 10kHz unit
+ UCHAR ucNumberOfCyclesInPeriodHi;
+ UCHAR ucLCDTimingSel; //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
+ USHORT usReserved1;
+ USHORT usInterNBVoltageLow; //An intermidiate PMW value to set the voltage
+ USHORT usInterNBVoltageHigh; //Another intermidiate PMW value to set the voltage
+ ULONG ulReserved[2];
+
+ USHORT usFSBClock; //In MHz unit
+ USHORT usCapabilityFlag; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
+ //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
+ //Bit[4]==1: P/2 mode, ==0: P/1 mode
+ USHORT usPCIENBCfgReg7; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
+ USHORT usK8MemoryClock; //in MHz unit
+ USHORT usK8SyncStartDelay; //in 0.01 us unit
+ USHORT usK8DataReturnTime; //in 0.01 us unit
+ UCHAR ucMaxNBVoltage;
+ UCHAR ucMinNBVoltage;
+ UCHAR ucMemoryType; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
+ UCHAR ucNumberOfCyclesInPeriod; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
+ UCHAR ucStartingPWM_HighTime; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
+ UCHAR ucHTLinkWidth; //16 bit vs. 8 bit
+ UCHAR ucMaxNBVoltageHigh;
+ UCHAR ucMinNBVoltageHigh;
+}ATOM_INTEGRATED_SYSTEM_INFO;
+
+/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
+ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock
+ For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
+ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+ For AMD IGP,for now this can be 0
+ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+ For AMD IGP,for now this can be 0
+
+usFSBClock: For Intel IGP,it's FSB Freq
+ For AMD IGP,it's HT Link Speed
+
+usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200
+usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation
+usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation
+
+VC:Voltage Control
+ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
+ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
+
+ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+*/
+
+
+/*
+The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
+Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
+The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
+
+SW components can access the IGP system infor structure in the same way as before
+*/
+
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock; //in 10kHz unit
+ ULONG ulReserved1[2]; //must be 0x0 for the reserved
+ ULONG ulBootUpUMAClock; //in 10kHz unit
+ ULONG ulBootUpSidePortClock; //in 10kHz unit
+ ULONG ulMinSidePortClock; //in 10kHz unit
+ ULONG ulReserved2[6]; //must be 0x0 for the reserved
+ ULONG ulSystemConfig; //see explanation below
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulDDISlot1Config;
+ ULONG ulDDISlot2Config;
+ UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
+ UCHAR ucUMAChannelNumber;
+ UCHAR ucDockingPinBit;
+ UCHAR ucDockingPinPolarity;
+ ULONG ulDockingPinCFGInfo;
+ ULONG ulCPUCapInfo;
+ USHORT usNumberOfCyclesInPeriod;
+ USHORT usMaxNBVoltage;
+ USHORT usMinNBVoltage;
+ USHORT usBootUpNBVoltage;
+ ULONG ulHTLinkFreq; //in 10Khz
+ USHORT usMinHTLinkWidth;
+ USHORT usMaxHTLinkWidth;
+ USHORT usUMASyncStartDelay;
+ USHORT usUMADataReturnTime;
+ USHORT usLinkStatusZeroTime;
+ USHORT usDACEfuse; //for storing badgap value (for RS880 only)
+ ULONG ulHighVoltageHTLinkFreq; // in 10Khz
+ ULONG ulLowVoltageHTLinkFreq; // in 10Khz
+ USHORT usMaxUpStreamHTLinkWidth;
+ USHORT usMaxDownStreamHTLinkWidth;
+ USHORT usMinUpStreamHTLinkWidth;
+ USHORT usMinDownStreamHTLinkWidth;
+ USHORT usFirmwareVersion; //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW.
+ USHORT usFullT0Time; // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us.
+ ULONG ulReserved3[96]; //must be 0x0
+}ATOM_INTEGRATED_SYSTEM_INFO_V2;
+
+/*
+ulBootUpEngineClock: Boot-up Engine Clock in 10Khz;
+ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
+ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
+
+ulSystemConfig:
+Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
+Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
+ =0: system boots up at driver control state. Power state depends on PowerPlay table.
+Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
+Bit[3]=1: Only one power state(Performance) will be supported.
+ =0: Multiple power states supported from PowerPlay table.
+Bit[4]=1: CLMC is supported and enabled on current system.
+ =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
+Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
+ =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
+Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
+ =0: Voltage settings is determined by powerplay table.
+Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
+ =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
+Bit[8]=1: CDLF is supported and enabled on current system.
+ =0: CDLF is not supported or enabled on current system.
+Bit[9]=1: DLL Shut Down feature is enabled on current system.
+ =0: DLL Shut Down feature is not enabled or supported on current system.
+
+ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
+
+ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
+ [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;
+
+ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
+ [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
+ [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12)
+ When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time.
+ in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example:
+ one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2.
+
+ [15:8] - Lane configuration attribute;
+ [23:16]- Connector type, possible value:
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A
+ CONNECTOR_OBJECT_ID_DISPLAYPORT
+ CONNECTOR_OBJECT_ID_eDP
+ [31:24]- Reserved
+
+ulDDISlot2Config: Same as Slot1.
+ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
+For IGP, Hypermemory is the only memory type showed in CCC.
+
+ucUMAChannelNumber: how many channels for the UMA;
+
+ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
+ucDockingPinBit: which bit in this register to read the pin status;
+ucDockingPinPolarity:Polarity of the pin when docked;
+
+ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
+
+usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
+
+usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
+usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
+ GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
+ PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
+ GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
+
+usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
+
+
+ulHTLinkFreq: Bootup HT link Frequency in 10Khz.
+usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
+ If CDLW enabled, both upstream and downstream width should be the same during bootup.
+usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
+ If CDLW enabled, both upstream and downstream width should be the same during bootup.
+
+usUMASyncStartDelay: Memory access latency, required for watermark calculation
+usUMADataReturnTime: Memory access latency, required for watermark calculation
+usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
+for Griffin or Greyhound. SBIOS needs to convert to actual time by:
+ if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
+ if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
+ if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
+ if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
+
+ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
+ This must be less than or equal to ulHTLinkFreq(bootup frequency).
+ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
+ This must be less than or equal to ulHighVoltageHTLinkFreq.
+
+usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
+usMaxDownStreamHTLinkWidth: same as above.
+usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
+usMinDownStreamHTLinkWidth: same as above.
+*/
+
+// ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition
+#define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5
+
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code
+
+#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
+#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
+#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
+#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
+#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
+#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
+#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
+#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
+#define SYSTEM_CONFIG_CDLF_ENABLED 0x00000100
+#define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED 0x00000200
+
+#define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
+
+#define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
+#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
+#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
+#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
+#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
+#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
+
+#define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
+#define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
+#define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
+
+#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
+
+// IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock; //in 10kHz unit
+ ULONG ulDentistVCOFreq; //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK.
+ ULONG ulLClockFreq; //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge
+ ULONG ulBootUpUMAClock; //in 10kHz unit
+ ULONG ulReserved1[8]; //must be 0x0 for the reserved
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulReserved2[4]; //must be 0x0 for the reserved
+ ULONG ulSystemConfig; //TBD
+ ULONG ulCPUCapInfo; //TBD
+ USHORT usMaxNBVoltage; //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
+ USHORT usMinNBVoltage; //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
+ USHORT usBootUpNBVoltage; //boot up NB voltage
+ UCHAR ucHtcTmpLmt; //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD
+ UCHAR ucTjOffset; //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD
+ ULONG ulReserved3[4]; //must be 0x0 for the reserved
+ ULONG ulDDISlot1Config; //see above ulDDISlot1Config definition
+ ULONG ulDDISlot2Config;
+ ULONG ulDDISlot3Config;
+ ULONG ulDDISlot4Config;
+ ULONG ulReserved4[4]; //must be 0x0 for the reserved
+ UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
+ UCHAR ucUMAChannelNumber;
+ USHORT usReserved;
+ ULONG ulReserved5[4]; //must be 0x0 for the reserved
+ ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default
+ ULONG ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback
+ ULONG ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications
+ ULONG ulReserved6[61]; //must be 0x0
+}ATOM_INTEGRATED_SYSTEM_INFO_V5;
+
+
+
+/****************************************************************************/
+// Structure used in GPUVirtualizationInfoTable
+/****************************************************************************/
+typedef struct _ATOM_GPU_VIRTUALIZATION_INFO_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulMCUcodeRomStartAddr;
+ ULONG ulMCUcodeLength;
+ ULONG ulSMCUcodeRomStartAddr;
+ ULONG ulSMCUcodeLength;
+ ULONG ulRLCVUcodeRomStartAddr;
+ ULONG ulRLCVUcodeLength;
+ ULONG ulTOCUcodeStartAddr;
+ ULONG ulTOCUcodeLength;
+ ULONG ulSMCPatchTableStartAddr;
+ ULONG ulSmcPatchTableLength;
+ ULONG ulSystemFlag;
+}ATOM_GPU_VIRTUALIZATION_INFO_V2_1;
+
+
+#define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
+#define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
+#define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
+#define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
+#define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
+#define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
+#define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
+#define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
+#define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
+#define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
+#define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
+#define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
+#define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
+#define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
+
+// define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable
+#define ASIC_INT_DAC1_ENCODER_ID 0x00
+#define ASIC_INT_TV_ENCODER_ID 0x02
+#define ASIC_INT_DIG1_ENCODER_ID 0x03
+#define ASIC_INT_DAC2_ENCODER_ID 0x04
+#define ASIC_EXT_TV_ENCODER_ID 0x06
+#define ASIC_INT_DVO_ENCODER_ID 0x07
+#define ASIC_INT_DIG2_ENCODER_ID 0x09
+#define ASIC_EXT_DIG_ENCODER_ID 0x05
+#define ASIC_EXT_DIG2_ENCODER_ID 0x08
+#define ASIC_INT_DIG3_ENCODER_ID 0x0a
+#define ASIC_INT_DIG4_ENCODER_ID 0x0b
+#define ASIC_INT_DIG5_ENCODER_ID 0x0c
+#define ASIC_INT_DIG6_ENCODER_ID 0x0d
+#define ASIC_INT_DIG7_ENCODER_ID 0x0e
+
+//define Encoder attribute
+#define ATOM_ANALOG_ENCODER 0
+#define ATOM_DIGITAL_ENCODER 1
+#define ATOM_DP_ENCODER 2
+
+#define ATOM_ENCODER_ENUM_MASK 0x70
+#define ATOM_ENCODER_ENUM_ID1 0x00
+#define ATOM_ENCODER_ENUM_ID2 0x10
+#define ATOM_ENCODER_ENUM_ID3 0x20
+#define ATOM_ENCODER_ENUM_ID4 0x30
+#define ATOM_ENCODER_ENUM_ID5 0x40
+#define ATOM_ENCODER_ENUM_ID6 0x50
+
+#define ATOM_DEVICE_CRT1_INDEX 0x00000000
+#define ATOM_DEVICE_LCD1_INDEX 0x00000001
+#define ATOM_DEVICE_TV1_INDEX 0x00000002
+#define ATOM_DEVICE_DFP1_INDEX 0x00000003
+#define ATOM_DEVICE_CRT2_INDEX 0x00000004
+#define ATOM_DEVICE_LCD2_INDEX 0x00000005
+#define ATOM_DEVICE_DFP6_INDEX 0x00000006
+#define ATOM_DEVICE_DFP2_INDEX 0x00000007
+#define ATOM_DEVICE_CV_INDEX 0x00000008
+#define ATOM_DEVICE_DFP3_INDEX 0x00000009
+#define ATOM_DEVICE_DFP4_INDEX 0x0000000A
+#define ATOM_DEVICE_DFP5_INDEX 0x0000000B
+
+#define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
+#define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
+#define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
+#define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 )
+
+#define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
+
+#define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX )
+#define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX )
+#define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX )
+#define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX )
+#define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX )
+#define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX )
+#define ATOM_DEVICE_DFP6_SUPPORT (0x1L << ATOM_DEVICE_DFP6_INDEX )
+#define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX )
+#define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX )
+#define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX )
+#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
+#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX )
+
+
+#define ATOM_DEVICE_CRT_SUPPORT (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
+#define ATOM_DEVICE_DFP_SUPPORT (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT)
+#define ATOM_DEVICE_TV_SUPPORT ATOM_DEVICE_TV1_SUPPORT
+#define ATOM_DEVICE_LCD_SUPPORT (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
+
+#define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
+#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
+#define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
+#define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
+#define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
+#define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
+#define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
+#define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
+#define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
+#define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
+#define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
+#define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
+#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
+
+
+#define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
+#define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
+#define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
+#define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
+#define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
+#define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
+
+#define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
+
+#define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
+#define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
+
+#define ATOM_DEVICE_I2C_ID_MASK 0x00000070
+#define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
+#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
+#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
+#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600
+#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690
+
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
+#define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
+#define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
+
+// usDeviceSupport:
+// Bits0 = 0 - no CRT1 support= 1- CRT1 is supported
+// Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported
+// Bit 2 = 0 - no TV1 support= 1- TV1 is supported
+// Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported
+// Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported
+// Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported
+// Bit 6 = 0 - no DFP6 support= 1- DFP6 is supported
+// Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported
+// Bit 8 = 0 - no CV support= 1- CV is supported
+// Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported
+// Bit 10= 0 - no DFP4 support= 1- DFP4 is supported
+// Bit 11= 0 - no DFP5 support= 1- DFP5 is supported
+//
+//
+
+/****************************************************************************/
+// Structure used in MclkSS_InfoTable
+/****************************************************************************/
+// ucI2C_ConfigID
+// [7:0] - I2C LINE Associate ID
+// = 0 - no I2C
+// [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection)
+// = 0, [6:0]=SW assisted I2C ID
+// [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use
+// = 2, HW engine for Multimedia use
+// = 3-7 Reserved for future I2C engines
+// [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
+
+typedef struct _ATOM_I2C_ID_CONFIG
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR bfHW_Capable:1;
+ UCHAR bfHW_EngineID:3;
+ UCHAR bfI2C_LineMux:4;
+#else
+ UCHAR bfI2C_LineMux:4;
+ UCHAR bfHW_EngineID:3;
+ UCHAR bfHW_Capable:1;
+#endif
+}ATOM_I2C_ID_CONFIG;
+
+typedef union _ATOM_I2C_ID_CONFIG_ACCESS
+{
+ ATOM_I2C_ID_CONFIG sbfAccess;
+ UCHAR ucAccess;
+}ATOM_I2C_ID_CONFIG_ACCESS;
+
+
+/****************************************************************************/
+// Structure used in GPIO_I2C_InfoTable
+/****************************************************************************/
+typedef struct _ATOM_GPIO_I2C_ASSIGMENT
+{
+ USHORT usClkMaskRegisterIndex;
+ USHORT usClkEnRegisterIndex;
+ USHORT usClkY_RegisterIndex;
+ USHORT usClkA_RegisterIndex;
+ USHORT usDataMaskRegisterIndex;
+ USHORT usDataEnRegisterIndex;
+ USHORT usDataY_RegisterIndex;
+ USHORT usDataA_RegisterIndex;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+ UCHAR ucClkMaskShift;
+ UCHAR ucClkEnShift;
+ UCHAR ucClkY_Shift;
+ UCHAR ucClkA_Shift;
+ UCHAR ucDataMaskShift;
+ UCHAR ucDataEnShift;
+ UCHAR ucDataY_Shift;
+ UCHAR ucDataA_Shift;
+ UCHAR ucReserved1;
+ UCHAR ucReserved2;
+}ATOM_GPIO_I2C_ASSIGMENT;
+
+typedef struct _ATOM_GPIO_I2C_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
+}ATOM_GPIO_I2C_INFO;
+
+/****************************************************************************/
+// Common Structure used in other structures
+/****************************************************************************/
+
+#ifndef _H2INC
+
+//Please don't add or expand this bitfield structure below, this one will retire soon.!
+typedef struct _ATOM_MODE_MISC_INFO
+{
+#if ATOM_BIG_ENDIAN
+ USHORT Reserved:6;
+ USHORT RGB888:1;
+ USHORT DoubleClock:1;
+ USHORT Interlace:1;
+ USHORT CompositeSync:1;
+ USHORT V_ReplicationBy2:1;
+ USHORT H_ReplicationBy2:1;
+ USHORT VerticalCutOff:1;
+ USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
+ USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
+ USHORT HorizontalCutOff:1;
+#else
+ USHORT HorizontalCutOff:1;
+ USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
+ USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
+ USHORT VerticalCutOff:1;
+ USHORT H_ReplicationBy2:1;
+ USHORT V_ReplicationBy2:1;
+ USHORT CompositeSync:1;
+ USHORT Interlace:1;
+ USHORT DoubleClock:1;
+ USHORT RGB888:1;
+ USHORT Reserved:6;
+#endif
+}ATOM_MODE_MISC_INFO;
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS
+{
+ ATOM_MODE_MISC_INFO sbfAccess;
+ USHORT usAccess;
+}ATOM_MODE_MISC_INFO_ACCESS;
+
+#else
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS
+{
+ USHORT usAccess;
+}ATOM_MODE_MISC_INFO_ACCESS;
+
+#endif
+
+// usModeMiscInfo-
+#define ATOM_H_CUTOFF 0x01
+#define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low
+#define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low
+#define ATOM_V_CUTOFF 0x08
+#define ATOM_H_REPLICATIONBY2 0x10
+#define ATOM_V_REPLICATIONBY2 0x20
+#define ATOM_COMPOSITESYNC 0x40
+#define ATOM_INTERLACE 0x80
+#define ATOM_DOUBLE_CLOCK_MODE 0x100
+#define ATOM_RGB888_MODE 0x200
+
+//usRefreshRate-
+#define ATOM_REFRESH_43 43
+#define ATOM_REFRESH_47 47
+#define ATOM_REFRESH_56 56
+#define ATOM_REFRESH_60 60
+#define ATOM_REFRESH_65 65
+#define ATOM_REFRESH_70 70
+#define ATOM_REFRESH_72 72
+#define ATOM_REFRESH_75 75
+#define ATOM_REFRESH_85 85
+
+// ATOM_MODE_TIMING data are exactly the same as VESA timing data.
+// Translation from EDID to ATOM_MODE_TIMING, use the following formula.
+//
+// VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
+// = EDID_HA + EDID_HBL
+// VESA_HDISP = VESA_ACTIVE = EDID_HA
+// VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
+// = EDID_HA + EDID_HSO
+// VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW
+// VESA_BORDER = EDID_BORDER
+
+
+/****************************************************************************/
+// Structure used in SetCRTC_UsingDTDTimingTable
+/****************************************************************************/
+typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
+{
+ USHORT usH_Size;
+ USHORT usH_Blanking_Time;
+ USHORT usV_Size;
+ USHORT usV_Blanking_Time;
+ USHORT usH_SyncOffset;
+ USHORT usH_SyncWidth;
+ USHORT usV_SyncOffset;
+ USHORT usV_SyncWidth;
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucH_Border; // From DFP EDID
+ UCHAR ucV_Border;
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucPadding[3];
+}SET_CRTC_USING_DTD_TIMING_PARAMETERS;
+
+/****************************************************************************/
+// Structure used in SetCRTC_TimingTable
+/****************************************************************************/
+typedef struct _SET_CRTC_TIMING_PARAMETERS
+{
+ USHORT usH_Total; // horizontal total
+ USHORT usH_Disp; // horizontal display
+ USHORT usH_SyncStart; // horozontal Sync start
+ USHORT usH_SyncWidth; // horizontal Sync width
+ USHORT usV_Total; // vertical total
+ USHORT usV_Disp; // vertical display
+ USHORT usV_SyncStart; // vertical Sync start
+ USHORT usV_SyncWidth; // vertical Sync width
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
+ UCHAR ucOverscanRight; // right
+ UCHAR ucOverscanLeft; // left
+ UCHAR ucOverscanBottom; // bottom
+ UCHAR ucOverscanTop; // top
+ UCHAR ucReserved;
+}SET_CRTC_TIMING_PARAMETERS;
+#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
+
+
+/****************************************************************************/
+// Structure used in StandardVESA_TimingTable
+// AnalogTV_InfoTable
+// ComponentVideoInfoTable
+/****************************************************************************/
+typedef struct _ATOM_MODE_TIMING
+{
+ USHORT usCRTC_H_Total;
+ USHORT usCRTC_H_Disp;
+ USHORT usCRTC_H_SyncStart;
+ USHORT usCRTC_H_SyncWidth;
+ USHORT usCRTC_V_Total;
+ USHORT usCRTC_V_Disp;
+ USHORT usCRTC_V_SyncStart;
+ USHORT usCRTC_V_SyncWidth;
+ USHORT usPixelClock; //in 10Khz unit
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ USHORT usCRTC_OverscanRight;
+ USHORT usCRTC_OverscanLeft;
+ USHORT usCRTC_OverscanBottom;
+ USHORT usCRTC_OverscanTop;
+ USHORT usReserve;
+ UCHAR ucInternalModeNumber;
+ UCHAR ucRefreshRate;
+}ATOM_MODE_TIMING;
+
+typedef struct _ATOM_DTD_FORMAT
+{
+ USHORT usPixClk;
+ USHORT usHActive;
+ USHORT usHBlanking_Time;
+ USHORT usVActive;
+ USHORT usVBlanking_Time;
+ USHORT usHSyncOffset;
+ USHORT usHSyncWidth;
+ USHORT usVSyncOffset;
+ USHORT usVSyncWidth;
+ USHORT usImageHSize;
+ USHORT usImageVSize;
+ UCHAR ucHBorder;
+ UCHAR ucVBorder;
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucInternalModeNumber;
+ UCHAR ucRefreshRate;
+}ATOM_DTD_FORMAT;
+
+/****************************************************************************/
+// Structure used in LVDS_InfoTable
+// * Need a document to describe this table
+/****************************************************************************/
+#define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+#define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+#define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+#define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+#define SUPPORTED_LCD_REFRESHRATE_48Hz 0x0040
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=1
+typedef struct _ATOM_LVDS_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usModePatchTableOffset;
+ USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
+ USHORT usOffDelayInMs;
+ UCHAR ucPowerSequenceDigOntoDEin10Ms;
+ UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+ UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
+ // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
+ // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
+ // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+}ATOM_LVDS_INFO;
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=2
+typedef struct _ATOM_LVDS_INFO_V12
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usExtInfoTableOffset;
+ USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
+ USHORT usOffDelayInMs;
+ UCHAR ucPowerSequenceDigOntoDEin10Ms;
+ UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+ UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
+ // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
+ // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
+ // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+ USHORT usLCDVenderID;
+ USHORT usLCDProductID;
+ UCHAR ucLCDPanel_SpecialHandlingCap;
+ UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
+ UCHAR ucReserved[2];
+}ATOM_LVDS_INFO_V12;
+
+//Definitions for ucLCDPanel_SpecialHandlingCap:
+
+//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
+//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
+#define LCDPANEL_CAP_READ_EDID 0x1
+
+//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
+//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
+//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
+#define LCDPANEL_CAP_DRR_SUPPORTED 0x2
+
+//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
+#define LCDPANEL_CAP_eDP 0x4
+
+
+//Color Bit Depth definition in EDID V1.4 @BYTE 14h
+//Bit 6 5 4
+ // 0 0 0 - Color bit depth is undefined
+ // 0 0 1 - 6 Bits per Primary Color
+ // 0 1 0 - 8 Bits per Primary Color
+ // 0 1 1 - 10 Bits per Primary Color
+ // 1 0 0 - 12 Bits per Primary Color
+ // 1 0 1 - 14 Bits per Primary Color
+ // 1 1 0 - 16 Bits per Primary Color
+ // 1 1 1 - Reserved
+
+#define PANEL_COLOR_BIT_DEPTH_MASK 0x70
+
+// Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled}
+#define PANEL_RANDOM_DITHER 0x80
+#define PANEL_RANDOM_DITHER_MASK 0x80
+
+#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this
+
+
+typedef struct _ATOM_LCD_REFRESH_RATE_SUPPORT
+{
+ UCHAR ucSupportedRefreshRate;
+ UCHAR ucMinRefreshRateForDRR;
+}ATOM_LCD_REFRESH_RATE_SUPPORT;
+
+/****************************************************************************/
+// Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12
+// ASIC Families: NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/
+typedef struct _ATOM_LCD_INFO_V13
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usExtInfoTableOffset;
+ union
+ {
+ USHORT usSupportedRefreshRate;
+ ATOM_LCD_REFRESH_RATE_SUPPORT sRefreshRateSupport;
+ };
+ ULONG ulReserved0;
+ UCHAR ucLCD_Misc; // Reorganized in V13
+ // Bit0: {=0:single, =1:dual},
+ // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB},
+ // Bit3:2: {Grey level}
+ // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h)
+ // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it?
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+ USHORT usLCDVenderID;
+ USHORT usLCDProductID;
+ UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13
+ // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
+ // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
+ // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
+ // Bit7-3: Reserved
+ UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
+ USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13
+
+ UCHAR ucPowerSequenceDIGONtoDE_in4Ms;
+ UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms;
+ UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms;
+ UCHAR ucPowerSequenceDEtoDIGON_in4Ms;
+
+ UCHAR ucOffDelay_in4Ms;
+ UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms;
+ UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms;
+ UCHAR ucReserved1;
+
+ UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh
+ UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h
+ UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h
+ UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h
+
+ USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode.
+ UCHAR uceDPToLVDSRxId;
+ UCHAR ucLcdReservd;
+ ULONG ulReserved[2];
+}ATOM_LCD_INFO_V13;
+
+#define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13
+
+//Definitions for ucLCD_Misc
+#define ATOM_PANEL_MISC_V13_DUAL 0x00000001
+#define ATOM_PANEL_MISC_V13_FPDI 0x00000002
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2
+#define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70
+#define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10
+#define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20
+
+//Color Bit Depth definition in EDID V1.4 @BYTE 14h
+//Bit 6 5 4
+ // 0 0 0 - Color bit depth is undefined
+ // 0 0 1 - 6 Bits per Primary Color
+ // 0 1 0 - 8 Bits per Primary Color
+ // 0 1 1 - 10 Bits per Primary Color
+ // 1 0 0 - 12 Bits per Primary Color
+ // 1 0 1 - 14 Bits per Primary Color
+ // 1 1 0 - 16 Bits per Primary Color
+ // 1 1 1 - Reserved
+
+//Definitions for ucLCDPanel_SpecialHandlingCap:
+
+//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
+//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
+#define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
+
+//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
+//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
+//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
+#define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
+
+//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
+#define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version
+
+//uceDPToLVDSRxId
+#define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip
+#define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init
+#define eDP_TO_LVDS_RT_ID 0x02 // RT tansaltor which require AMD SW init
+
+typedef struct _ATOM_PATCH_RECORD_MODE
+{
+ UCHAR ucRecordType;
+ USHORT usHDisp;
+ USHORT usVDisp;
+}ATOM_PATCH_RECORD_MODE;
+
+typedef struct _ATOM_LCD_RTS_RECORD
+{
+ UCHAR ucRecordType;
+ UCHAR ucRTSValue;
+}ATOM_LCD_RTS_RECORD;
+
+//!! If the record below exits, it shoud always be the first record for easy use in command table!!!
+// The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead.
+typedef struct _ATOM_LCD_MODE_CONTROL_CAP
+{
+ UCHAR ucRecordType;
+ USHORT usLCDCap;
+}ATOM_LCD_MODE_CONTROL_CAP;
+
+#define LCD_MODE_CAP_BL_OFF 1
+#define LCD_MODE_CAP_CRTC_OFF 2
+#define LCD_MODE_CAP_PANEL_OFF 4
+
+
+typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
+{
+ UCHAR ucRecordType;
+ UCHAR ucFakeEDIDLength; // = 128 means EDID lenght is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
+ UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements.
+} ATOM_FAKE_EDID_PATCH_RECORD;
+
+typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD
+{
+ UCHAR ucRecordType;
+ USHORT usHSize;
+ USHORT usVSize;
+}ATOM_PANEL_RESOLUTION_PATCH_RECORD;
+
+#define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
+#define LCD_RTS_RECORD_TYPE 2
+#define LCD_CAP_RECORD_TYPE 3
+#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
+#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
+#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6
+#define ATOM_RECORD_END_TYPE 0xFF
+
+/****************************Spread Spectrum Info Table Definitions **********************/
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=2
+typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
+{
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS Others:TBD
+ UCHAR ucSS_Step;
+ UCHAR ucSS_Delay;
+ UCHAR ucSS_Id;
+ UCHAR ucRecommendedRef_Div;
+ UCHAR ucSS_Range; //it was reserved for V11
+}ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
+
+#define ATOM_MAX_SS_ENTRY 16
+#define ATOM_DP_SS_ID1 0x0f1 // SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well.
+#define ATOM_DP_SS_ID2 0x0f2 // SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable.
+#define ATOM_LVLINK_2700MHz_SS_ID 0x0f3 // SS ID for LV link translator chip at 2.7Ghz
+#define ATOM_LVLINK_1620MHz_SS_ID 0x0f4 // SS ID for LV link translator chip at 1.62Ghz
+
+
+
+#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
+#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
+#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
+#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
+#define ATOM_INTERNAL_SS_MASK 0x00000000
+#define ATOM_EXTERNAL_SS_MASK 0x00000002
+#define EXEC_SS_STEP_SIZE_SHIFT 2
+#define EXEC_SS_DELAY_SHIFT 4
+#define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
+
+typedef struct _ATOM_SPREAD_SPECTRUM_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
+}ATOM_SPREAD_SPECTRUM_INFO;
+
+
+/****************************************************************************/
+// Structure used in AnalogTV_InfoTable (Top level)
+/****************************************************************************/
+//ucTVBootUpDefaultStd definiton:
+
+//ATOM_TV_NTSC 1
+//ATOM_TV_NTSCJ 2
+//ATOM_TV_PAL 3
+//ATOM_TV_PALM 4
+//ATOM_TV_PALCN 5
+//ATOM_TV_PALN 6
+//ATOM_TV_PAL60 7
+//ATOM_TV_SECAM 8
+
+//ucTVSuppportedStd definition:
+#define NTSC_SUPPORT 0x1
+#define NTSCJ_SUPPORT 0x2
+
+#define PAL_SUPPORT 0x4
+#define PALM_SUPPORT 0x8
+#define PALCN_SUPPORT 0x10
+#define PALN_SUPPORT 0x20
+#define PAL60_SUPPORT 0x40
+#define SECAM_SUPPORT 0x80
+
+#define MAX_SUPPORTED_TV_TIMING 2
+
+typedef struct _ATOM_ANALOG_TV_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucTV_SuppportedStandard;
+ UCHAR ucTV_BootUpDefaultStandard;
+ UCHAR ucExt_TV_ASIC_ID;
+ UCHAR ucExt_TV_ASIC_SlaveAddr;
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];
+}ATOM_ANALOG_TV_INFO;
+
+typedef struct _ATOM_DPCD_INFO
+{
+ UCHAR ucRevisionNumber; //10h : Revision 1.0; 11h : Revision 1.1
+ UCHAR ucMaxLinkRate; //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane
+ UCHAR ucMaxLane; //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP
+ UCHAR ucMaxDownSpread; //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec)
+}ATOM_DPCD_INFO;
+
+#define ATOM_DPCD_MAX_LANE_MASK 0x1F
+
+/**************************************************************************/
+// VRAM usage and their defintions
+
+// One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
+// Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
+// All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
+// To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
+// To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
+
+// Moved VESA_MEMORY_IN_64K_BLOCK definition to "AtomConfig.h" so that it can be redefined in design (SKU).
+//#ifndef VESA_MEMORY_IN_64K_BLOCK
+//#define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!)
+//#endif
+
+#define ATOM_EDID_RAW_DATASIZE 256 //In Bytes
+#define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes
+#define ATOM_HWICON_INFOTABLE_SIZE 32
+#define MAX_DTD_MODE_IN_VRAM 6
+#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT)
+#define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
+//20 bytes for Encoder Type and DPCD in STD EDID area
+#define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
+#define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 )
+
+#define ATOM_HWICON1_SURFACE_ADDR 0
+#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
+#define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP6_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP6_DTD_MODE_TBL_ADDR (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP6_STD_MODE_TBL_ADDR (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP2_EDID_ADDR (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024)
+#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512
+
+//The size below is in Kb!
+#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
+
+#define ATOM_VRAM_RESERVE_V2_SIZE 32
+
+#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
+#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
+#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
+#define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
+
+/***********************************************************************************/
+// Structure used in VRAM_UsageByFirmwareTable
+// Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
+// at running time.
+// note2: From RV770, the memory is more than 32bit addressable, so we will change
+// ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains
+// exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
+// (in offset to start of memory address) is KB aligned instead of byte aligend.
+// Note3:
+/* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged
+constant across VGA or non VGA adapter,
+for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can have:
+
+If (ulStartAddrUsedByFirmware!=0)
+FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB;
+Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose
+else //Non VGA case
+ if (FB_Size<=2Gb)
+ FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB;
+ else
+ FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB
+
+CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
+
+/***********************************************************************************/
+#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
+
+typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
+{
+ ULONG ulStartAddrUsedByFirmware;
+ USHORT usFirmwareUseInKb;
+ USHORT usReserved;
+}ATOM_FIRMWARE_VRAM_RESERVE_INFO;
+
+typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
+}ATOM_VRAM_USAGE_BY_FIRMWARE;
+
+// change verion to 1.5, when allow driver to allocate the vram area for command table access.
+typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5
+{
+ ULONG ulStartAddrUsedByFirmware;
+ USHORT usFirmwareUseInKb;
+ USHORT usFBUsedByDrvInKb;
+}ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5;
+
+typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
+}ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5;
+
+/****************************************************************************/
+// Structure used in GPIO_Pin_LUTTable
+/****************************************************************************/
+typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
+{
+ USHORT usGpioPin_AIndex;
+ UCHAR ucGpioPinBitShift;
+ UCHAR ucGPIO_ID;
+}ATOM_GPIO_PIN_ASSIGNMENT;
+
+//ucGPIO_ID pre-define id for multiple usage
+// GPIO use to control PCIE_VDDC in certain SLT board
+#define PCIE_VDDC_CONTROL_GPIO_PINID 56
+
+//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable
+#define PP_AC_DC_SWITCH_GPIO_PINID 60
+//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
+#define VDDC_VRHOT_GPIO_PINID 61
+//if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled
+#define VDDC_PCC_GPIO_PINID 62
+// Only used on certain SLT/PA board to allow utility to cut Efuse.
+#define EFUSE_CUT_ENABLE_GPIO_PINID 63
+// ucGPIO=DRAM_SELF_REFRESH_GPIO_PIND uses for memory self refresh (ucGPIO=0, DRAM self-refresh; ucGPIO=
+#define DRAM_SELF_REFRESH_GPIO_PINID 64
+// Thermal interrupt output->system thermal chip GPIO pin
+#define THERMAL_INT_OUTPUT_GPIO_PINID 65
+
+
+typedef struct _ATOM_GPIO_PIN_LUT
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
+}ATOM_GPIO_PIN_LUT;
+
+/****************************************************************************/
+// Structure used in ComponentVideoInfoTable
+/****************************************************************************/
+#define GPIO_PIN_ACTIVE_HIGH 0x1
+#define MAX_SUPPORTED_CV_STANDARDS 5
+
+// definitions for ATOM_D_INFO.ucSettings
+#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0]
+#define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out
+#define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7]
+
+typedef struct _ATOM_GPIO_INFO
+{
+ USHORT usAOffset;
+ UCHAR ucSettings;
+ UCHAR ucReserved;
+}ATOM_GPIO_INFO;
+
+// definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
+#define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
+
+// definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
+#define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7];
+#define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0]
+
+// definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
+//Line 3 out put 5V.
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
+
+//Line 3 out put 2.2V
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
+
+//Line 3 out put 0V
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
+
+#define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0]
+
+#define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7
+
+//GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
+
+
+typedef struct _ATOM_COMPONENT_VIDEO_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMask_PinRegisterIndex;
+ USHORT usEN_PinRegisterIndex;
+ USHORT usY_PinRegisterIndex;
+ USHORT usA_PinRegisterIndex;
+ UCHAR ucBitShift;
+ UCHAR ucPinActiveState; //ucPinActiveState: Bit0=1 active high, =0 active low
+ ATOM_DTD_FORMAT sReserved; // must be zeroed out
+ UCHAR ucMiscInfo;
+ UCHAR uc480i;
+ UCHAR uc480p;
+ UCHAR uc720p;
+ UCHAR uc1080i;
+ UCHAR ucLetterBoxMode;
+ UCHAR ucReserved[3];
+ UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
+ ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+}ATOM_COMPONENT_VIDEO_INFO;
+
+//ucTableFormatRevision=2
+//ucTableContentRevision=1
+typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucMiscInfo;
+ UCHAR uc480i;
+ UCHAR uc480p;
+ UCHAR uc720p;
+ UCHAR uc1080i;
+ UCHAR ucReserved;
+ UCHAR ucLetterBoxMode;
+ UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
+ ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+}ATOM_COMPONENT_VIDEO_INFO_V21;
+
+#define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
+
+/****************************************************************************/
+// Structure used in object_InfoTable
+/****************************************************************************/
+typedef struct _ATOM_OBJECT_HEADER
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ USHORT usConnectorObjectTableOffset;
+ USHORT usRouterObjectTableOffset;
+ USHORT usEncoderObjectTableOffset;
+ USHORT usProtectionObjectTableOffset; //only available when Protection block is independent.
+ USHORT usDisplayPathTableOffset;
+}ATOM_OBJECT_HEADER;
+
+typedef struct _ATOM_OBJECT_HEADER_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ USHORT usConnectorObjectTableOffset;
+ USHORT usRouterObjectTableOffset;
+ USHORT usEncoderObjectTableOffset;
+ USHORT usProtectionObjectTableOffset; //only available when Protection block is independent.
+ USHORT usDisplayPathTableOffset;
+ USHORT usMiscObjectTableOffset;
+}ATOM_OBJECT_HEADER_V3;
+
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH
+{
+ USHORT usDeviceTag; //supported device
+ USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
+ USHORT usConnObjectId; //Connector Object ID
+ USHORT usGPUObjectId; //GPU ID
+ USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
+}ATOM_DISPLAY_OBJECT_PATH;
+
+typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
+{
+ USHORT usDeviceTag; //supported device
+ USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
+ USHORT usConnObjectId; //Connector Object ID
+ USHORT usGPUObjectId; //GPU ID
+ USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder
+}ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
+{
+ UCHAR ucNumOfDispPath;
+ UCHAR ucVersion;
+ UCHAR ucPadding[2];
+ ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
+}ATOM_DISPLAY_OBJECT_PATH_TABLE;
+
+typedef struct _ATOM_OBJECT //each object has this structure
+{
+ USHORT usObjectID;
+ USHORT usSrcDstTableOffset;
+ USHORT usRecordOffset; //this pointing to a bunch of records defined below
+ USHORT usReserved;
+}ATOM_OBJECT;
+
+typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure
+{
+ UCHAR ucNumberOfObjects;
+ UCHAR ucPadding[3];
+ ATOM_OBJECT asObjects[1];
+}ATOM_OBJECT_TABLE;
+
+typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure
+{
+ UCHAR ucNumberOfSrc;
+ USHORT usSrcObjectID[1];
+ UCHAR ucNumberOfDst;
+ USHORT usDstObjectID[1];
+}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
+
+
+//Two definitions below are for OPM on MXM module designs
+
+#define EXT_HPDPIN_LUTINDEX_0 0
+#define EXT_HPDPIN_LUTINDEX_1 1
+#define EXT_HPDPIN_LUTINDEX_2 2
+#define EXT_HPDPIN_LUTINDEX_3 3
+#define EXT_HPDPIN_LUTINDEX_4 4
+#define EXT_HPDPIN_LUTINDEX_5 5
+#define EXT_HPDPIN_LUTINDEX_6 6
+#define EXT_HPDPIN_LUTINDEX_7 7
+#define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES (EXT_HPDPIN_LUTINDEX_7+1)
+
+#define EXT_AUXDDC_LUTINDEX_0 0
+#define EXT_AUXDDC_LUTINDEX_1 1
+#define EXT_AUXDDC_LUTINDEX_2 2
+#define EXT_AUXDDC_LUTINDEX_3 3
+#define EXT_AUXDDC_LUTINDEX_4 4
+#define EXT_AUXDDC_LUTINDEX_5 5
+#define EXT_AUXDDC_LUTINDEX_6 6
+#define EXT_AUXDDC_LUTINDEX_7 7
+#define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1)
+
+//ucChannelMapping are defined as following
+//for DP connector, eDP, DP to VGA/LVDS
+//Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucDP_Lane3_Source:2;
+ UCHAR ucDP_Lane2_Source:2;
+ UCHAR ucDP_Lane1_Source:2;
+ UCHAR ucDP_Lane0_Source:2;
+#else
+ UCHAR ucDP_Lane0_Source:2;
+ UCHAR ucDP_Lane1_Source:2;
+ UCHAR ucDP_Lane2_Source:2;
+ UCHAR ucDP_Lane3_Source:2;
+#endif
+}ATOM_DP_CONN_CHANNEL_MAPPING;
+
+//for DVI/HDMI, in dual link case, both links have to have same mapping.
+//Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucDVI_CLK_Source:2;
+ UCHAR ucDVI_DATA0_Source:2;
+ UCHAR ucDVI_DATA1_Source:2;
+ UCHAR ucDVI_DATA2_Source:2;
+#else
+ UCHAR ucDVI_DATA2_Source:2;
+ UCHAR ucDVI_DATA1_Source:2;
+ UCHAR ucDVI_DATA0_Source:2;
+ UCHAR ucDVI_CLK_Source:2;
+#endif
+}ATOM_DVI_CONN_CHANNEL_MAPPING;
+
+typedef struct _EXT_DISPLAY_PATH
+{
+ USHORT usDeviceTag; //A bit vector to show what devices are supported
+ USHORT usDeviceACPIEnum; //16bit device ACPI id.
+ USHORT usDeviceConnector; //A physical connector for displays to plug in, using object connector definitions
+ UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT
+ UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT
+ USHORT usExtEncoderObjId; //external encoder object id
+ union{
+ UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping
+ ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
+ ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
+ };
+ UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
+ USHORT usCaps;
+ USHORT usReserved;
+}EXT_DISPLAY_PATH;
+
+#define NUMBER_OF_UCHAR_FOR_GUID 16
+#define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7
+
+//usCaps
+#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01
+#define EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN 0x02
+#define EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204 0x04
+#define EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT 0x08
+
+typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string
+ EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
+ UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
+ UCHAR uc3DStereoPinId; // use for eDP panel
+ UCHAR ucRemoteDisplayConfig;
+ UCHAR uceDPToLVDSRxId;
+ UCHAR ucFixDPVoltageSwing; // usCaps[1]=1, this indicate DP_LANE_SET value
+ UCHAR Reserved[3]; // for potential expansion
+}ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
+
+//Related definitions, all records are differnt but they have a commond header
+typedef struct _ATOM_COMMON_RECORD_HEADER
+{
+ UCHAR ucRecordType; //An emun to indicate the record type
+ UCHAR ucRecordSize; //The size of the whole record in byte
+}ATOM_COMMON_RECORD_HEADER;
+
+
+#define ATOM_I2C_RECORD_TYPE 1
+#define ATOM_HPD_INT_RECORD_TYPE 2
+#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
+#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
+#define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
+#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
+#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
+#define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
+#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
+#define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
+#define ATOM_CONNECTOR_CF_RECORD_TYPE 11
+#define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
+#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
+#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
+#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
+#define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE 16 //This is for the case when connectors are not known to object table
+#define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table
+#define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
+#define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19
+#define ATOM_ENCODER_CAP_RECORD_TYPE 20
+#define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21
+
+
+//Must be updated when new record type is added,equal to that record definition!
+#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE
+
+typedef struct _ATOM_I2C_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ATOM_I2C_ID_CONFIG sucI2cId;
+ UCHAR ucI2CAddr; //The slave address, it's 0 when the record is attached to connector for DDC
+}ATOM_I2C_RECORD;
+
+typedef struct _ATOM_HPD_INT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucHPDIntGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
+ UCHAR ucPlugged_PinState;
+}ATOM_HPD_INT_RECORD;
+
+
+typedef struct _ATOM_OUTPUT_PROTECTION_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucProtectionFlag;
+ UCHAR ucReserved;
+}ATOM_OUTPUT_PROTECTION_RECORD;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG
+{
+ ULONG ulACPIDeviceEnum; //Reserved for now
+ USHORT usDeviceID; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
+ USHORT usPadding;
+}ATOM_CONNECTOR_DEVICE_TAG;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucNumberOfDevice;
+ UCHAR ucReserved;
+ ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
+}ATOM_CONNECTOR_DEVICE_TAG_RECORD;
+
+
+typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucConfigGPIOID;
+ UCHAR ucConfigGPIOState; //Set to 1 when it's active high to enable external flow in
+ UCHAR ucFlowinGPIPID;
+ UCHAR ucExtInGPIPID;
+}ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
+
+typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucCTL1GPIO_ID;
+ UCHAR ucCTL1GPIOState; //Set to 1 when it's active high
+ UCHAR ucCTL2GPIO_ID;
+ UCHAR ucCTL2GPIOState; //Set to 1 when it's active high
+ UCHAR ucCTL3GPIO_ID;
+ UCHAR ucCTL3GPIOState; //Set to 1 when it's active high
+ UCHAR ucCTLFPGA_IN_ID;
+ UCHAR ucPadding[3];
+}ATOM_ENCODER_FPGA_CONTROL_RECORD;
+
+typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
+ UCHAR ucTVActiveState; //Indicating when the pin==0 or 1 when TV is connected
+}ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
+
+typedef struct _ATOM_JTAG_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucTMSGPIO_ID;
+ UCHAR ucTMSGPIOState; //Set to 1 when it's active high
+ UCHAR ucTCKGPIO_ID;
+ UCHAR ucTCKGPIOState; //Set to 1 when it's active high
+ UCHAR ucTDOGPIO_ID;
+ UCHAR ucTDOGPIOState; //Set to 1 when it's active high
+ UCHAR ucTDIGPIO_ID;
+ UCHAR ucTDIGPIOState; //Set to 1 when it's active high
+ UCHAR ucPadding[2];
+}ATOM_JTAG_RECORD;
+
+
+//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
+typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
+{
+ UCHAR ucGPIOID; // GPIO_ID, find the corresponding ID in GPIO_LUT table
+ UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin
+}ATOM_GPIO_PIN_CONTROL_PAIR;
+
+typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucFlags; // Future expnadibility
+ UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object
+ ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins
+}ATOM_OBJECT_GPIO_CNTL_RECORD;
+
+//Definitions for GPIO pin state
+#define GPIO_PIN_TYPE_INPUT 0x00
+#define GPIO_PIN_TYPE_OUTPUT 0x10
+#define GPIO_PIN_TYPE_HW_CONTROL 0x20
+
+//For GPIO_PIN_TYPE_OUTPUT the following is defined
+#define GPIO_PIN_OUTPUT_STATE_MASK 0x01
+#define GPIO_PIN_OUTPUT_STATE_SHIFT 0
+#define GPIO_PIN_STATE_ACTIVE_LOW 0x0
+#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
+
+// Indexes to GPIO array in GLSync record
+// GLSync record is for Frame Lock/Gen Lock feature.
+#define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0
+#define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1
+#define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ 3
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4
+#define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
+#define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8
+#define ATOM_GPIO_INDEX_GLSYNC_MAX 9
+
+typedef struct _ATOM_ENCODER_DVO_CF_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ULONG ulStrengthControl; // DVOA strength control for CF
+ UCHAR ucPadding[2];
+}ATOM_ENCODER_DVO_CF_RECORD;
+
+// Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
+#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder
+#define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
+#define ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN 0x04 // HDMI2.0 6Gbps enable or not.
+
+typedef struct _ATOM_ENCODER_CAP_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ union {
+ USHORT usEncoderCap;
+ struct {
+#if ATOM_BIG_ENDIAN
+ USHORT usReserved:14; // Bit1-15 may be defined for other capability in future
+ USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable
+ USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
+#else
+ USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
+ USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable
+ USHORT usReserved:14; // Bit1-15 may be defined for other capability in future
+#endif
+ };
+ };
+}ATOM_ENCODER_CAP_RECORD;
+
+// value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
+
+typedef struct _ATOM_CONNECTOR_CF_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ USHORT usMaxPixClk;
+ UCHAR ucFlowCntlGpioId;
+ UCHAR ucSwapCntlGpioId;
+ UCHAR ucConnectedDvoBundle;
+ UCHAR ucPadding;
+}ATOM_CONNECTOR_CF_RECORD;
+
+typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ATOM_DTD_FORMAT asTiming;
+}ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
+
+typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
+ UCHAR ucSubConnectorType; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
+ UCHAR ucReserved;
+}ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
+
+
+typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucMuxType; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
+ UCHAR ucMuxControlPin;
+ UCHAR ucMuxState[2]; //for alligment purpose
+}ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
+
+typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucMuxType;
+ UCHAR ucMuxControlPin;
+ UCHAR ucMuxState[2]; //for alligment purpose
+}ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
+
+// define ucMuxType
+#define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
+#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
+
+typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES]; //An fixed size array which maps external pins to internal GPIO_PIN_INFO table
+}ATOM_CONNECTOR_HPDPIN_LUT_RECORD;
+
+typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ATOM_I2C_ID_CONFIG ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES]; //An fixed size array which maps external pins to internal DDC ID
+}ATOM_CONNECTOR_AUXDDC_LUT_RECORD;
+
+typedef struct _ATOM_OBJECT_LINK_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ USHORT usObjectID; //could be connector, encorder or other object in object.h
+}ATOM_OBJECT_LINK_RECORD;
+
+typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ USHORT usReserved;
+}ATOM_CONNECTOR_REMOTE_CAP_RECORD;
+
+typedef struct _ATOM_CONNECTOR_LAYOUT_INFO
+{
+ USHORT usConnectorObjectId;
+ UCHAR ucConnectorType;
+ UCHAR ucPosition;
+}ATOM_CONNECTOR_LAYOUT_INFO;
+
+// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
+#define CONNECTOR_TYPE_DVI_D 1
+#define CONNECTOR_TYPE_DVI_I 2
+#define CONNECTOR_TYPE_VGA 3
+#define CONNECTOR_TYPE_HDMI 4
+#define CONNECTOR_TYPE_DISPLAY_PORT 5
+#define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6
+
+typedef struct _ATOM_BRACKET_LAYOUT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucLength;
+ UCHAR ucWidth;
+ UCHAR ucConnNum;
+ UCHAR ucReserved;
+ ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1];
+}ATOM_BRACKET_LAYOUT_RECORD;
+
+
+/****************************************************************************/
+// Structure used in XXXX
+/****************************************************************************/
+typedef struct _ATOM_VOLTAGE_INFO_HEADER
+{
+ USHORT usVDDCBaseLevel; //In number of 50mv unit
+ USHORT usReserved; //For possible extension table offset
+ UCHAR ucNumOfVoltageEntries;
+ UCHAR ucBytesPerVoltageEntry;
+ UCHAR ucVoltageStep; //Indicating in how many mv increament is one step, 0.5mv unit
+ UCHAR ucDefaultVoltageEntry;
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+}ATOM_VOLTAGE_INFO_HEADER;
+
+typedef struct _ATOM_VOLTAGE_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_INFO_HEADER viHeader;
+ UCHAR ucVoltageEntries[64]; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
+}ATOM_VOLTAGE_INFO;
+
+
+typedef struct _ATOM_VOLTAGE_FORMULA
+{
+ USHORT usVoltageBaseLevel; // In number of 1mv unit
+ USHORT usVoltageStep; // Indicating in how many mv increament is one step, 1mv unit
+ UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage
+ UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv
+ UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
+ UCHAR ucReserved;
+ UCHAR ucVIDAdjustEntries[32]; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
+}ATOM_VOLTAGE_FORMULA;
+
+typedef struct _VOLTAGE_LUT_ENTRY
+{
+ USHORT usVoltageCode; // The Voltage ID, either GPIO or I2C code
+ USHORT usVoltageValue; // The corresponding Voltage Value, in mV
+}VOLTAGE_LUT_ENTRY;
+
+typedef struct _ATOM_VOLTAGE_FORMULA_V2
+{
+ UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage
+ UCHAR ucReserved[3];
+ VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries
+}ATOM_VOLTAGE_FORMULA_V2;
+
+typedef struct _ATOM_VOLTAGE_CONTROL
+{
+ UCHAR ucVoltageControlId; //Indicate it is controlled by I2C or GPIO or HW state machine
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+ USHORT usGpioPin_AIndex; //GPIO_PAD register index
+ UCHAR ucGpioPinBitShift[9]; //at most 8 pin support 255 VIDs, termintate with 0xff
+ UCHAR ucReserved;
+}ATOM_VOLTAGE_CONTROL;
+
+// Define ucVoltageControlId
+#define VOLTAGE_CONTROLLED_BY_HW 0x00
+#define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
+#define VOLTAGE_CONTROLLED_BY_GPIO 0x80
+#define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage
+#define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
+#define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage
+#define VOLTAGE_CONTROL_ID_DS4402 0x04
+#define VOLTAGE_CONTROL_ID_UP6266 0x05
+#define VOLTAGE_CONTROL_ID_SCORPIO 0x06
+#define VOLTAGE_CONTROL_ID_VT1556M 0x07
+#define VOLTAGE_CONTROL_ID_CHL822x 0x08
+#define VOLTAGE_CONTROL_ID_VT1586M 0x09
+#define VOLTAGE_CONTROL_ID_UP1637 0x0A
+#define VOLTAGE_CONTROL_ID_CHL8214 0x0B
+#define VOLTAGE_CONTROL_ID_UP1801 0x0C
+#define VOLTAGE_CONTROL_ID_ST6788A 0x0D
+#define VOLTAGE_CONTROL_ID_CHLIR3564SVI2 0x0E
+#define VOLTAGE_CONTROL_ID_AD527x 0x0F
+#define VOLTAGE_CONTROL_ID_NCP81022 0x10
+#define VOLTAGE_CONTROL_ID_LTC2635 0x11
+#define VOLTAGE_CONTROL_ID_NCP4208 0x12
+#define VOLTAGE_CONTROL_ID_IR35xx 0x13
+#define VOLTAGE_CONTROL_ID_RT9403 0x14
+
+#define VOLTAGE_CONTROL_ID_GENERIC_I2C 0x40
+
+typedef struct _ATOM_VOLTAGE_OBJECT
+{
+ UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
+ UCHAR ucSize; //Size of Object
+ ATOM_VOLTAGE_CONTROL asControl; //describ how to control
+ ATOM_VOLTAGE_FORMULA asFormula; //Indicate How to convert real Voltage to VID
+}ATOM_VOLTAGE_OBJECT;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_V2
+{
+ UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
+ UCHAR ucSize; //Size of Object
+ ATOM_VOLTAGE_CONTROL asControl; //describ how to control
+ ATOM_VOLTAGE_FORMULA_V2 asFormula; //Indicate How to convert real Voltage to VID
+}ATOM_VOLTAGE_OBJECT_V2;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_OBJECT asVoltageObj[3]; //Info for Voltage control
+}ATOM_VOLTAGE_OBJECT_INFO;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_OBJECT_V2 asVoltageObj[3]; //Info for Voltage control
+}ATOM_VOLTAGE_OBJECT_INFO_V2;
+
+typedef struct _ATOM_LEAKID_VOLTAGE
+{
+ UCHAR ucLeakageId;
+ UCHAR ucReserved;
+ USHORT usVoltage;
+}ATOM_LEAKID_VOLTAGE;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
+ UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
+ UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase
+ USHORT usSize; //Size of Object
+}ATOM_VOLTAGE_OBJECT_HEADER_V3;
+
+// ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode
+#define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_EVV 8
+#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+
+typedef struct _VOLTAGE_LUT_ENTRY_V2
+{
+ ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register
+ USHORT usVoltageValue; // The corresponding Voltage Value, in mV
+}VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
+{
+ USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register
+ USHORT usVoltageId;
+ USHORT usLeakageId; // The corresponding Voltage Value, in mV
+}LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
+
+
+typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
+ UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+ UCHAR ucVoltageControlFlag; // Bit0: 0 - One byte data; 1 - Two byte data
+ UCHAR ulReserved[3];
+ VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff
+}ATOM_I2C_VOLTAGE_OBJECT_V3;
+
+// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
+#define VOLTAGE_DATA_ONE_BYTE 0
+#define VOLTAGE_DATA_TWO_BYTE 1
+
+typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
+ UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode
+ UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table
+ UCHAR ucPhaseDelay; // phase delay in unit of micro second
+ UCHAR ucReserved;
+ ULONG ulGpioMaskVal; // GPIO Mask value
+ VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
+}ATOM_GPIO_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = 0x10/0x11/0x12
+ UCHAR ucLeakageCntlId; // default is 0
+ UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table
+ UCHAR ucReserved[2];
+ ULONG ulMaxVoltageLevel;
+ LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
+}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
+
+
+typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_SVID2
+// 14:7 � PSI0_VID
+// 6 � PSI0_EN
+// 5 � PSI1
+// 4:2 � load line slope trim.
+// 1:0 � offset trim,
+ USHORT usLoadLine_PSI;
+// GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31
+ UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31
+ UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31
+ ULONG ulReserved;
+}ATOM_SVID2_VOLTAGE_OBJECT_V3;
+
+typedef union _ATOM_VOLTAGE_OBJECT_V3{
+ ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
+ ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
+ ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
+ ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj;
+}ATOM_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control
+}ATOM_VOLTAGE_OBJECT_INFO_V3_1;
+
+
+typedef struct _ATOM_ASIC_PROFILE_VOLTAGE
+{
+ UCHAR ucProfileId;
+ UCHAR ucReserved;
+ USHORT usSize;
+ USHORT usEfuseSpareStartAddr;
+ USHORT usFuseIndex[8]; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
+ ATOM_LEAKID_VOLTAGE asLeakVol[2]; //Leakid and relatd voltage
+}ATOM_ASIC_PROFILE_VOLTAGE;
+
+//ucProfileId
+#define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
+#define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
+#define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
+
+typedef struct _ATOM_ASIC_PROFILING_INFO
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
+}ATOM_ASIC_PROFILING_INFO;
+
+typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ UCHAR ucLeakageBinNum; // indicate the entry number of LeakageId/Voltage Lut table
+ USHORT usLeakageBinArrayOffset; // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher)
+
+ UCHAR ucElbVDDC_Num;
+ USHORT usElbVDDC_IdArrayOffset; // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 )
+ USHORT usElbVDDC_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array
+
+ UCHAR ucElbVDDCI_Num;
+ USHORT usElbVDDCI_IdArrayOffset; // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 )
+ USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array
+}ATOM_ASIC_PROFILING_INFO_V2_1;
+
+
+//Here is parameter to convert Efuse value to Measure value
+//Measured = LN((2^Bitsize-1)/EFUSE-1)*(Range)/(-alpha)+(Max+Min)/2
+typedef struct _EFUSE_LOGISTIC_FUNC_PARAM
+{
+ USHORT usEfuseIndex; // Efuse Index in DWORD address, for example Index 911, usEuseIndex=112
+ UCHAR ucEfuseBitLSB; // Efuse bit LSB in DWORD address, for example Index 911, usEfuseBitLSB= 911-112*8=15
+ UCHAR ucEfuseLength; // Efuse bits length,
+ ULONG ulEfuseEncodeRange; // Range = Max - Min, bit31 indicate the efuse is negative number
+ ULONG ulEfuseEncodeAverage; // Average = ( Max + Min )/2
+}EFUSE_LOGISTIC_FUNC_PARAM;
+
+//Linear Function: Measured = Round ( Efuse * ( Max-Min )/(2^BitSize -1 ) + Min )
+typedef struct _EFUSE_LINEAR_FUNC_PARAM
+{
+ USHORT usEfuseIndex; // Efuse Index in DWORD address, for example Index 911, usEuseIndex=112
+ UCHAR ucEfuseBitLSB; // Efuse bit LSB in DWORD address, for example Index 911, usEfuseBitLSB= 911-112*8=15
+ UCHAR ucEfuseLength; // Efuse bits length,
+ ULONG ulEfuseEncodeRange; // Range = Max - Min, bit31 indicate the efuse is negative number
+ ULONG ulEfuseMin; // Min
+}EFUSE_LINEAR_FUNC_PARAM;
+
+
+typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ULONG ulEvvDerateTdp;
+ ULONG ulEvvDerateTdc;
+ ULONG ulBoardCoreTemp;
+ ULONG ulMaxVddc;
+ ULONG ulMinVddc;
+ ULONG ulLoadLineSlop;
+ ULONG ulLeakageTemp;
+ ULONG ulLeakageVoltage;
+ EFUSE_LINEAR_FUNC_PARAM sCACm;
+ EFUSE_LINEAR_FUNC_PARAM sCACb;
+ EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
+ USHORT usLkgEuseIndex;
+ UCHAR ucLkgEfuseBitLSB;
+ UCHAR ucLkgEfuseLength;
+ ULONG ulLkgEncodeLn_MaxDivMin;
+ ULONG ulLkgEncodeMax;
+ ULONG ulLkgEncodeMin;
+ ULONG ulEfuseLogisticAlpha;
+ USHORT usPowerDpm0;
+ USHORT usCurrentDpm0;
+ USHORT usPowerDpm1;
+ USHORT usCurrentDpm1;
+ USHORT usPowerDpm2;
+ USHORT usCurrentDpm2;
+ USHORT usPowerDpm3;
+ USHORT usCurrentDpm3;
+ USHORT usPowerDpm4;
+ USHORT usCurrentDpm4;
+ USHORT usPowerDpm5;
+ USHORT usCurrentDpm5;
+ USHORT usPowerDpm6;
+ USHORT usCurrentDpm6;
+ USHORT usPowerDpm7;
+ USHORT usCurrentDpm7;
+}ATOM_ASIC_PROFILING_INFO_V3_1;
+
+
+typedef struct _ATOM_ASIC_PROFILING_INFO_V3_2
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ULONG ulEvvLkgFactor;
+ ULONG ulBoardCoreTemp;
+ ULONG ulMaxVddc;
+ ULONG ulMinVddc;
+ ULONG ulLoadLineSlop;
+ ULONG ulLeakageTemp;
+ ULONG ulLeakageVoltage;
+ EFUSE_LINEAR_FUNC_PARAM sCACm;
+ EFUSE_LINEAR_FUNC_PARAM sCACb;
+ EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
+ USHORT usLkgEuseIndex;
+ UCHAR ucLkgEfuseBitLSB;
+ UCHAR ucLkgEfuseLength;
+ ULONG ulLkgEncodeLn_MaxDivMin;
+ ULONG ulLkgEncodeMax;
+ ULONG ulLkgEncodeMin;
+ ULONG ulEfuseLogisticAlpha;
+ USHORT usPowerDpm0;
+ USHORT usPowerDpm1;
+ USHORT usPowerDpm2;
+ USHORT usPowerDpm3;
+ USHORT usPowerDpm4;
+ USHORT usPowerDpm5;
+ USHORT usPowerDpm6;
+ USHORT usPowerDpm7;
+ ULONG ulTdpDerateDPM0;
+ ULONG ulTdpDerateDPM1;
+ ULONG ulTdpDerateDPM2;
+ ULONG ulTdpDerateDPM3;
+ ULONG ulTdpDerateDPM4;
+ ULONG ulTdpDerateDPM5;
+ ULONG ulTdpDerateDPM6;
+ ULONG ulTdpDerateDPM7;
+}ATOM_ASIC_PROFILING_INFO_V3_2;
+
+
+// for Tonga/Fiji speed EVV algorithm
+typedef struct _ATOM_ASIC_PROFILING_INFO_V3_3
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ULONG ulEvvLkgFactor;
+ ULONG ulBoardCoreTemp;
+ ULONG ulMaxVddc;
+ ULONG ulMinVddc;
+ ULONG ulLoadLineSlop;
+ ULONG ulLeakageTemp;
+ ULONG ulLeakageVoltage;
+ EFUSE_LINEAR_FUNC_PARAM sCACm;
+ EFUSE_LINEAR_FUNC_PARAM sCACb;
+ EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
+ EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
+ USHORT usLkgEuseIndex;
+ UCHAR ucLkgEfuseBitLSB;
+ UCHAR ucLkgEfuseLength;
+ ULONG ulLkgEncodeLn_MaxDivMin;
+ ULONG ulLkgEncodeMax;
+ ULONG ulLkgEncodeMin;
+ ULONG ulEfuseLogisticAlpha;
+ USHORT usPowerDpm0;
+ USHORT usPowerDpm1;
+ USHORT usPowerDpm2;
+ USHORT usPowerDpm3;
+ USHORT usPowerDpm4;
+ USHORT usPowerDpm5;
+ USHORT usPowerDpm6;
+ USHORT usPowerDpm7;
+ ULONG ulTdpDerateDPM0;
+ ULONG ulTdpDerateDPM1;
+ ULONG ulTdpDerateDPM2;
+ ULONG ulTdpDerateDPM3;
+ ULONG ulTdpDerateDPM4;
+ ULONG ulTdpDerateDPM5;
+ ULONG ulTdpDerateDPM6;
+ ULONG ulTdpDerateDPM7;
+ EFUSE_LINEAR_FUNC_PARAM sRoFuse;
+ ULONG ulRoAlpha;
+ ULONG ulRoBeta;
+ ULONG ulRoGamma;
+ ULONG ulRoEpsilon;
+ ULONG ulATermRo;
+ ULONG ulBTermRo;
+ ULONG ulCTermRo;
+ ULONG ulSclkMargin;
+ ULONG ulFmaxPercent;
+ ULONG ulCRPercent;
+ ULONG ulSFmaxPercent;
+ ULONG ulSCRPercent;
+ ULONG ulSDCMargine;
+}ATOM_ASIC_PROFILING_INFO_V3_3;
+
+typedef struct _ATOM_POWER_SOURCE_OBJECT
+{
+ UCHAR ucPwrSrcId; // Power source
+ UCHAR ucPwrSensorType; // GPIO, I2C or none
+ UCHAR ucPwrSensId; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id
+ UCHAR ucPwrSensSlaveAddr; // Slave address if I2C detect
+ UCHAR ucPwrSensRegIndex; // I2C register Index if I2C detect
+ UCHAR ucPwrSensRegBitMask; // detect which bit is used if I2C detect
+ UCHAR ucPwrSensActiveState; // high active or low active
+ UCHAR ucReserve[3]; // reserve
+ USHORT usSensPwr; // in unit of watt
+}ATOM_POWER_SOURCE_OBJECT;
+
+typedef struct _ATOM_POWER_SOURCE_INFO
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ UCHAR asPwrbehave[16];
+ ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
+}ATOM_POWER_SOURCE_INFO;
+
+
+//Define ucPwrSrcId
+#define POWERSOURCE_PCIE_ID1 0x00
+#define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
+#define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
+#define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
+#define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
+
+//define ucPwrSensorId
+#define POWER_SENSOR_ALWAYS 0x00
+#define POWER_SENSOR_GPIO 0x01
+#define POWER_SENSOR_I2C 0x02
+
+typedef struct _ATOM_CLK_VOLT_CAPABILITY
+{
+ ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
+ ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
+}ATOM_CLK_VOLT_CAPABILITY;
+
+
+typedef struct _ATOM_CLK_VOLT_CAPABILITY_V2
+{
+ USHORT usVoltageLevel; // The real Voltage Level round up value in unit of mv,
+ ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
+}ATOM_CLK_VOLT_CAPABILITY_V2;
+
+typedef struct _ATOM_AVAILABLE_SCLK_LIST
+{
+ ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
+ USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK
+ USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK
+}ATOM_AVAILABLE_SCLK_LIST;
+
+// ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition
+#define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0]
+
+// this IntegrateSystemInfoTable is used for Liano/Ontario APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulSB_MMIO_Base_Addr;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulMinEngineClock;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ USHORT usNBP0Voltage;
+ USHORT usNBP1Voltage;
+ USHORT usBootUpNBVoltage;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];
+ ULONG ulCSR_M3_ARB_CNTL_UVD[10];
+ ULONG ulCSR_M3_ARB_CNTL_FS3D[10];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulMinimumNClk;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG SclkDpmBoostMargin;
+ ULONG SclkDpmThrottleMargin;
+ USHORT SclkDpmTdpLimitPG;
+ USHORT SclkDpmTdpLimitBoost;
+ ULONG ulBoostEngineCLock;
+ UCHAR ulBoostVid_2bit;
+ UCHAR EnableBoost;
+ USHORT GnbTdpLimit;
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucLVDSReserved;
+ ULONG ulReserved3[15];
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V6;
+
+// ulGPUCapInfo
+#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
+#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08
+
+//ucLVDSMisc:
+#define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01
+#define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02
+#define SYS_INFO_LVDSMISC__888_BPC 0x04
+#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08
+#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10
+// new since Trinity
+#define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN 0x20
+
+// not used any more
+#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04
+#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08
+
+/**********************************************************************************************************************
+ ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock voltage requirement.
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_CRT2_SUPPORT 0x0010
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+ulOtherDisplayMisc: Other display related flags, not defined yet.
+ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+ =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+ bit[3]=0: Enable HW AUX mode detection logic
+ =1: Disable HW AUX mode dettion logic
+ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt.
+ Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ulCPUCapInfo: TBD
+usNBP0Voltage: VID for voltage on NB P0 State
+usNBP1Voltage: VID for voltage on NB P1 State
+usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+**********************************************************************************************************************/
+
+// this Table is used for Liano/Ontario APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
+{
+ ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo;
+ ULONG ulPowerplayTable[128];
+}ATOM_FUSION_SYSTEM_INFO_V1;
+
+
+typedef struct _ATOM_TDP_CONFIG_BITS
+{
+#if ATOM_BIG_ENDIAN
+ ULONG uReserved:2;
+ ULONG uTDP_Value:14; // Original TDP value in tens of milli watts
+ ULONG uCTDP_Value:14; // Override value in tens of milli watts
+ ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
+#else
+ ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
+ ULONG uCTDP_Value:14; // Override value in tens of milli watts
+ ULONG uTDP_Value:14; // Original TDP value in tens of milli watts
+ ULONG uReserved:2;
+#endif
+}ATOM_TDP_CONFIG_BITS;
+
+typedef union _ATOM_TDP_CONFIG
+{
+ ATOM_TDP_CONFIG_BITS TDP_config;
+ ULONG TDP_config_all;
+}ATOM_TDP_CONFIG;
+
+/**********************************************************************************************************************
+ ATOM_FUSION_SYSTEM_INFO_V1 Description
+sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
+ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]
+**********************************************************************************************************************/
+
+// this IntegrateSystemInfoTable is used for Trinity APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulSB_MMIO_Base_Addr;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulMinEngineClock;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ USHORT usNBP0Voltage;
+ USHORT usNBP1Voltage;
+ USHORT usBootUpNBVoltage;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ATOM_TDP_CONFIG asTdpConfig;
+ ULONG ulReserved[19];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulMinimumNClk;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG SclkDpmBoostMargin;
+ ULONG SclkDpmThrottleMargin;
+ USHORT SclkDpmTdpLimitPG;
+ USHORT SclkDpmTdpLimitBoost;
+ ULONG ulBoostEngineCLock;
+ UCHAR ulBoostVid_2bit;
+ UCHAR EnableBoost;
+ USHORT GnbTdpLimit;
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucTravisLVDSVolAdjust;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucMinAllowedBL_Level;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[4];
+ USHORT usNBP2Voltage;
+ USHORT usNBP3Voltage;
+ ULONG ulNbpStateNClkFreq[4];
+ UCHAR ucNBDPMEnable;
+ UCHAR ucReserved[3];
+ UCHAR ucDPMState0VclkFid;
+ UCHAR ucDPMState0DclkFid;
+ UCHAR ucDPMState1VclkFid;
+ UCHAR ucDPMState1DclkFid;
+ UCHAR ucDPMState2VclkFid;
+ UCHAR ucDPMState2DclkFid;
+ UCHAR ucDPMState3VclkFid;
+ UCHAR ucDPMState3DclkFid;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
+
+// ulOtherDisplayMisc
+#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01
+#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02
+#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04
+#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08
+
+// ulGPUCapInfo
+#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
+#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02
+#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08
+#define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10
+//ulGPUCapInfo[16]=1 indicate SMC firmware is able to support GNB fast resume function, so that driver can call SMC to program most of GNB register during resuming, from ML
+#define SYS_INFO_GPUCAPS__GNB_FAST_RESUME_CAPABLE 0x00010000
+
+//ulGPUCapInfo[17]=1 indicate battery boost feature is enable, from ML
+#define SYS_INFO_GPUCAPS__BATTERY_BOOST_ENABLE 0x00020000
+
+/**********************************************************************************************************************
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock voltage requirement.
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
+ =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
+ bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+ =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+ bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+ =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+ bit[3]=0: VBIOS fast boot is disable
+ =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+ =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+ bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
+ =1: DP mode use single PLL mode
+ bit[3]=0: Enable AUX HW mode detection logic
+ =1: Disable AUX HW mode detection logic
+
+ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt.
+ Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ulCPUCapInfo: TBD
+usNBP0Voltage: VID for voltage on NB P0 State
+usNBP1Voltage: VID for voltage on NB P1 State
+usNBP2Voltage: VID for voltage on NB P2 State
+usNBP3Voltage: VID for voltage on NB P3 State
+usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
+ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
+ value to program Travis register LVDS_CTRL_4
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+ =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
+ =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
+ =0 means to use VBIOS default delay which is 125 ( 500ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
+ LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
+
+ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate.
+
+**********************************************************************************************************************/
+
+// this IntegrateSystemInfoTable is used for Kaveri & Kabini APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulVBIOSMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulDISP_CLK2Freq;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulReserved2;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ ULONG ulReserved3;
+ USHORT usGPUReservedSysMemSize;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ATOM_TDP_CONFIG asTdpConfig;
+ ULONG ulReserved[19];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulReserved4;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG ulGPUReservedSysMemBaseAddrLo;
+ ULONG ulGPUReservedSysMemBaseAddrHi;
+ ATOM_CLK_VOLT_CAPABILITY s5thDISPCLK_Voltage;
+ ULONG ulReserved5;
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucTravisLVDSVolAdjust;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucMinAllowedBL_Level;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[4];
+ ULONG ulPSPVersion;
+ ULONG ulNbpStateNClkFreq[4];
+ USHORT usNBPStateVoltage[4];
+ USHORT usBootUpNBVoltage;
+ USHORT usReserved2;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_8;
+
+/**********************************************************************************************************************
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels).
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+
+ulVBIOSMisc: Miscellenous flags for VBIOS requirement and interface
+ bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
+ =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
+ bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+ =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+ bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+ =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+ bit[3]=0: VBIOS fast boot is disable
+ =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+
+ulGPUCapInfo: bit[0~2]= Reserved
+ bit[3]=0: Enable AUX HW mode detection logic
+ =1: Disable AUX HW mode detection logic
+ bit[4]=0: Disable DFS bypass feature
+ =1: Enable DFS bypass feature
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ Bit[3]=0: GNB DPM is disabled
+ =1: GNB DPM is enabled
+ulCPUCapInfo: TBD
+
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+
+strVBIOSMsg[40]: VBIOS boot up customized message string
+
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+
+usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+
+usGPUReservedSysMemSize: Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB.
+ulGPUReservedSysMemBaseAddrLo: Low 32 bits base address to the reserved system memory.
+ulGPUReservedSysMemBaseAddrHi: High 32 bits base address to the reserved system memory.
+
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
+ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
+ value to program Travis register LVDS_CTRL_4
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms:
+ LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+ =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms:
+ LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOffVARY_BLtoDE_in4Ms:
+ LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
+ =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOffDEtoDIGON_in4Ms:
+ LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSOffToOnDelay_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
+ =0 means to use VBIOS default delay which is 125 ( 500ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
+ LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
+
+ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
+
+ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
+ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State
+usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
+usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded
+sExtDispConnInfo: Display connector information table provided to VBIOS
+
+**********************************************************************************************************************/
+
+// this Table is used for Kaveri/Kabini APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V2
+{
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
+ ULONG ulPowerplayTable[128]; // Update comments here to link new powerplay table definition structure
+}ATOM_FUSION_SYSTEM_INFO_V2;
+
+
+typedef struct _ATOM_I2C_REG_INFO
+{
+ UCHAR ucI2cRegIndex;
+ UCHAR ucI2cRegVal;
+}ATOM_I2C_REG_INFO;
+
+// this IntegrateSystemInfoTable is used for Carrizo
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_9
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; // no longer used, keep it as is to avoid driver compiling error
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulVBIOSMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulDISP_CLK2Freq;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulReserved2;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ ULONG ulReserved3;
+ USHORT usGPUReservedSysMemSize;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ATOM_TDP_CONFIG asTdpConfig;
+ UCHAR ucExtHDMIReDrvSlvAddr;
+ UCHAR ucExtHDMIReDrvRegNum;
+ ATOM_I2C_REG_INFO asExtHDMIRegSetting[9];
+ ULONG ulReserved[2];
+ ATOM_CLK_VOLT_CAPABILITY_V2 sDispClkVoltageMapping[8];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; // no longer used, keep it as is to avoid driver compiling error
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulReserved4;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG ulGPUReservedSysMemBaseAddrLo;
+ ULONG ulGPUReservedSysMemBaseAddrHi;
+ ULONG ulReserved5[3];
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucTravisLVDSVolAdjust;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucMinAllowedBL_Level;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[4]; // only 2 level is changed.
+ ULONG ulPSPVersion;
+ ULONG ulNbpStateNClkFreq[4];
+ USHORT usNBPStateVoltage[4];
+ USHORT usBootUpNBVoltage;
+ UCHAR ucEDPv1_4VSMode;
+ UCHAR ucReserved2;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_9;
+
+
+// definition for ucEDPv1_4VSMode
+#define EDP_VS_LEGACY_MODE 0
+#define EDP_VS_LOW_VDIFF_MODE 1
+#define EDP_VS_HIGH_VDIFF_MODE 2
+#define EDP_VS_STRETCH_MODE 3
+#define EDP_VS_SINGLE_VDIFF_MODE 4
+#define EDP_VS_VARIABLE_PREM_MODE 5
+
+
+// this IntegrateSystemInfoTable is used for Carrizo
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_10
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ULONG ulReserved0[8];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulVBIOSMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulReserved1;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulReserved2;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ ULONG ulReserved3;
+ USHORT usGPUReservedSysMemSize;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ATOM_TDP_CONFIG asTdpConfig;
+ ULONG ulReserved[7];
+ ATOM_CLK_VOLT_CAPABILITY_V2 sDispClkVoltageMapping[8];
+ ULONG ulReserved6[10];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulReserved4;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG ulGPUReservedSysMemBaseAddrLo;
+ ULONG ulGPUReservedSysMemBaseAddrHi;
+ ULONG ulReserved5[3];
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucTravisLVDSVolAdjust;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucMinAllowedBL_Level;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[2];
+ ULONG ulReserved7[2];
+ ULONG ulPSPVersion;
+ ULONG ulNbpStateNClkFreq[4];
+ USHORT usNBPStateVoltage[4];
+ USHORT usBootUpNBVoltage;
+ UCHAR ucEDPv1_4VSMode;
+ UCHAR ucReserved2;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_10;
+
+/**************************************************************************/
+// This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
+//Memory SS Info Table
+//Define Memory Clock SS chip ID
+#define ICS91719 1
+#define ICS91720 2
+
+//Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
+typedef struct _ATOM_I2C_DATA_RECORD
+{
+ UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
+ UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually
+}ATOM_I2C_DATA_RECORD;
+
+
+//Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
+typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
+{
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //I2C line and HW/SW assisted cap.
+ UCHAR ucSSChipID; //SS chip being used
+ UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip
+ UCHAR ucNumOfI2CDataRecords; //number of data block
+ ATOM_I2C_DATA_RECORD asI2CData[1];
+}ATOM_I2C_DEVICE_SETUP_INFO;
+
+//==========================================================================================
+typedef struct _ATOM_ASIC_MVDD_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
+}ATOM_ASIC_MVDD_INFO;
+
+//==========================================================================================
+#define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
+
+//==========================================================================================
+/**************************************************************************/
+
+typedef struct _ATOM_ASIC_SS_ASSIGNMENT
+{
+ ULONG ulTargetClockRange; //Clock Out frequence (VCO ), in unit of 10Khz
+ USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
+ USHORT usSpreadRateInKhz; //in unit of kHz, modulation freq
+ UCHAR ucClockIndication; //Indicate which clock source needs SS
+ UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread.
+ UCHAR ucReserved[2];
+}ATOM_ASIC_SS_ASSIGNMENT;
+
+//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type.
+//SS is not required or enabled if a match is not found.
+#define ASIC_INTERNAL_MEMORY_SS 1
+#define ASIC_INTERNAL_ENGINE_SS 2
+#define ASIC_INTERNAL_UVD_SS 3
+#define ASIC_INTERNAL_SS_ON_TMDS 4
+#define ASIC_INTERNAL_SS_ON_HDMI 5
+#define ASIC_INTERNAL_SS_ON_LVDS 6
+#define ASIC_INTERNAL_SS_ON_DP 7
+#define ASIC_INTERNAL_SS_ON_DCPLL 8
+#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
+#define ASIC_INTERNAL_VCE_SS 10
+#define ASIC_INTERNAL_GPUPLL_SS 11
+
+
+typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
+{
+ ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
+ //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
+ USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
+ USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq
+ UCHAR ucClockIndication; //Indicate which clock source needs SS
+ UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
+ UCHAR ucReserved[2];
+}ATOM_ASIC_SS_ASSIGNMENT_V2;
+
+//ucSpreadSpectrumMode
+//#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
+//#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
+//#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
+//#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
+//#define ATOM_INTERNAL_SS_MASK 0x00000000
+//#define ATOM_EXTERNAL_SS_MASK 0x00000002
+
+typedef struct _ATOM_ASIC_INTERNAL_SS_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
+}ATOM_ASIC_INTERNAL_SS_INFO;
+
+typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[1]; //this is point only.
+}ATOM_ASIC_INTERNAL_SS_INFO_V2;
+
+typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3
+{
+ ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
+ //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
+ USHORT usSpreadSpectrumPercentage; //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4
+ USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq
+ UCHAR ucClockIndication; //Indicate which clock source needs SS
+ UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
+ UCHAR ucReserved[2];
+}ATOM_ASIC_SS_ASSIGNMENT_V3;
+
+//ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode
+#define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01
+#define SS_MODE_V3_EXTERNAL_SS_MASK 0x02
+#define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10
+
+typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[1]; //this is pointer only.
+}ATOM_ASIC_INTERNAL_SS_INFO_V3;
+
+
+//==============================Scratch Pad Definition Portion===============================
+#define ATOM_DEVICE_CONNECT_INFO_DEF 0
+#define ATOM_ROM_LOCATION_DEF 1
+#define ATOM_TV_STANDARD_DEF 2
+#define ATOM_ACTIVE_INFO_DEF 3
+#define ATOM_LCD_INFO_DEF 4
+#define ATOM_DOS_REQ_INFO_DEF 5
+#define ATOM_ACC_CHANGE_INFO_DEF 6
+#define ATOM_DOS_MODE_INFO_DEF 7
+#define ATOM_I2C_CHANNEL_STATUS_DEF 8
+#define ATOM_I2C_CHANNEL_STATUS1_DEF 9
+#define ATOM_INTERNAL_TIMER_DEF 10
+
+// BIOS_0_SCRATCH Definition
+#define ATOM_S0_CRT1_MONO 0x00000001L
+#define ATOM_S0_CRT1_COLOR 0x00000002L
+#define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
+#define ATOM_S0_TV1_SVIDEO_A 0x00000008L
+#define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
+
+#define ATOM_S0_CV_A 0x00000010L
+#define ATOM_S0_CV_DIN_A 0x00000020L
+#define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
+
+
+#define ATOM_S0_CRT2_MONO 0x00000100L
+#define ATOM_S0_CRT2_COLOR 0x00000200L
+#define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE 0x00000400L
+#define ATOM_S0_TV1_SVIDEO 0x00000800L
+#define ATOM_S0_TV1_SCART 0x00004000L
+#define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
+
+#define ATOM_S0_CV 0x00001000L
+#define ATOM_S0_CV_DIN 0x00002000L
+#define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
+
+#define ATOM_S0_DFP1 0x00010000L
+#define ATOM_S0_DFP2 0x00020000L
+#define ATOM_S0_LCD1 0x00040000L
+#define ATOM_S0_LCD2 0x00080000L
+#define ATOM_S0_DFP6 0x00100000L
+#define ATOM_S0_DFP3 0x00200000L
+#define ATOM_S0_DFP4 0x00400000L
+#define ATOM_S0_DFP5 0x00800000L
+
+
+#define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6
+
+#define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with
+ // the FAD/HDP reg access bug. Bit is read by DAL, this is obsolete from RV5xx
+
+#define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
+#define ATOM_S0_THERMAL_STATE_SHIFT 26
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
+#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
+
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
+
+//Byte aligned defintion for BIOS usage
+#define ATOM_S0_CRT1_MONOb0 0x01
+#define ATOM_S0_CRT1_COLORb0 0x02
+#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
+
+#define ATOM_S0_TV1_COMPOSITEb0 0x04
+#define ATOM_S0_TV1_SVIDEOb0 0x08
+#define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
+
+#define ATOM_S0_CVb0 0x10
+#define ATOM_S0_CV_DINb0 0x20
+#define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
+
+#define ATOM_S0_CRT2_MONOb1 0x01
+#define ATOM_S0_CRT2_COLORb1 0x02
+#define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
+
+#define ATOM_S0_TV1_COMPOSITEb1 0x04
+#define ATOM_S0_TV1_SVIDEOb1 0x08
+#define ATOM_S0_TV1_SCARTb1 0x40
+#define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
+
+#define ATOM_S0_CVb1 0x10
+#define ATOM_S0_CV_DINb1 0x20
+#define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
+
+#define ATOM_S0_DFP1b2 0x01
+#define ATOM_S0_DFP2b2 0x02
+#define ATOM_S0_LCD1b2 0x04
+#define ATOM_S0_LCD2b2 0x08
+#define ATOM_S0_DFP6b2 0x10
+#define ATOM_S0_DFP3b2 0x20
+#define ATOM_S0_DFP4b2 0x40
+#define ATOM_S0_DFP5b2 0x80
+
+
+#define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
+#define ATOM_S0_THERMAL_STATE_SHIFTb3 2
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
+#define ATOM_S0_LCD1_SHIFT 18
+
+// BIOS_1_SCRATCH Definition
+#define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
+#define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
+
+// BIOS_2_SCRATCH Definition
+#define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
+#define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
+#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
+
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
+
+#define ATOM_S2_DEVICE_DPMS_STATE 0x00010000L
+#define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
+
+#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
+#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
+#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
+#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
+#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
+#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
+
+
+//Byte aligned defintion for BIOS usage
+#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
+#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
+#define ATOM_S2_DEVICE_DPMS_STATEb2 0x01
+
+#define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
+#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
+#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
+
+
+// BIOS_3_SCRATCH Definition
+#define ATOM_S3_CRT1_ACTIVE 0x00000001L
+#define ATOM_S3_LCD1_ACTIVE 0x00000002L
+#define ATOM_S3_TV1_ACTIVE 0x00000004L
+#define ATOM_S3_DFP1_ACTIVE 0x00000008L
+#define ATOM_S3_CRT2_ACTIVE 0x00000010L
+#define ATOM_S3_LCD2_ACTIVE 0x00000020L
+#define ATOM_S3_DFP6_ACTIVE 0x00000040L
+#define ATOM_S3_DFP2_ACTIVE 0x00000080L
+#define ATOM_S3_CV_ACTIVE 0x00000100L
+#define ATOM_S3_DFP3_ACTIVE 0x00000200L
+#define ATOM_S3_DFP4_ACTIVE 0x00000400L
+#define ATOM_S3_DFP5_ACTIVE 0x00000800L
+
+
+#define ATOM_S3_DEVICE_ACTIVE_MASK 0x00000FFFL
+
+#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
+#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
+
+#define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
+#define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
+#define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
+#define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
+#define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
+#define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
+#define ATOM_S3_DFP6_CRTC_ACTIVE 0x00400000L
+#define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
+#define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
+#define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
+#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
+#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
+
+
+#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
+#define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
+//Below two definitions are not supported in pplib, but in the old powerplay in DAL
+#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
+#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
+
+
+
+//Byte aligned defintion for BIOS usage
+#define ATOM_S3_CRT1_ACTIVEb0 0x01
+#define ATOM_S3_LCD1_ACTIVEb0 0x02
+#define ATOM_S3_TV1_ACTIVEb0 0x04
+#define ATOM_S3_DFP1_ACTIVEb0 0x08
+#define ATOM_S3_CRT2_ACTIVEb0 0x10
+#define ATOM_S3_LCD2_ACTIVEb0 0x20
+#define ATOM_S3_DFP6_ACTIVEb0 0x40
+#define ATOM_S3_DFP2_ACTIVEb0 0x80
+#define ATOM_S3_CV_ACTIVEb1 0x01
+#define ATOM_S3_DFP3_ACTIVEb1 0x02
+#define ATOM_S3_DFP4_ACTIVEb1 0x04
+#define ATOM_S3_DFP5_ACTIVEb1 0x08
+
+
+#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
+
+#define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
+#define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
+#define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
+#define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
+#define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
+#define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
+#define ATOM_S3_DFP6_CRTC_ACTIVEb2 0x40
+#define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
+#define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
+#define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
+#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
+#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
+
+
+#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
+
+
+// BIOS_4_SCRATCH Definition
+#define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
+#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
+#define ATOM_S4_LCD1_REFRESH_SHIFT 8
+
+//Byte aligned defintion for BIOS usage
+#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
+#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
+#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
+
+// BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
+#define ATOM_S5_DOS_REQ_CRT1b0 0x01
+#define ATOM_S5_DOS_REQ_LCD1b0 0x02
+#define ATOM_S5_DOS_REQ_TV1b0 0x04
+#define ATOM_S5_DOS_REQ_DFP1b0 0x08
+#define ATOM_S5_DOS_REQ_CRT2b0 0x10
+#define ATOM_S5_DOS_REQ_LCD2b0 0x20
+#define ATOM_S5_DOS_REQ_DFP6b0 0x40
+#define ATOM_S5_DOS_REQ_DFP2b0 0x80
+#define ATOM_S5_DOS_REQ_CVb1 0x01
+#define ATOM_S5_DOS_REQ_DFP3b1 0x02
+#define ATOM_S5_DOS_REQ_DFP4b1 0x04
+#define ATOM_S5_DOS_REQ_DFP5b1 0x08
+
+
+#define ATOM_S5_DOS_REQ_DEVICEw0 0x0FFF
+
+#define ATOM_S5_DOS_REQ_CRT1 0x0001
+#define ATOM_S5_DOS_REQ_LCD1 0x0002
+#define ATOM_S5_DOS_REQ_TV1 0x0004
+#define ATOM_S5_DOS_REQ_DFP1 0x0008
+#define ATOM_S5_DOS_REQ_CRT2 0x0010
+#define ATOM_S5_DOS_REQ_LCD2 0x0020
+#define ATOM_S5_DOS_REQ_DFP6 0x0040
+#define ATOM_S5_DOS_REQ_DFP2 0x0080
+#define ATOM_S5_DOS_REQ_CV 0x0100
+#define ATOM_S5_DOS_REQ_DFP3 0x0200
+#define ATOM_S5_DOS_REQ_DFP4 0x0400
+#define ATOM_S5_DOS_REQ_DFP5 0x0800
+
+#define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
+#define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
+#define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
+#define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
+#define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
+ (ATOM_S5_DOS_FORCE_CVb3<<8))
+// BIOS_6_SCRATCH Definition
+#define ATOM_S6_DEVICE_CHANGE 0x00000001L
+#define ATOM_S6_SCALER_CHANGE 0x00000002L
+#define ATOM_S6_LID_CHANGE 0x00000004L
+#define ATOM_S6_DOCKING_CHANGE 0x00000008L
+#define ATOM_S6_ACC_MODE 0x00000010L
+#define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
+#define ATOM_S6_LID_STATE 0x00000040L
+#define ATOM_S6_DOCK_STATE 0x00000080L
+#define ATOM_S6_CRITICAL_STATE 0x00000100L
+#define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
+#define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
+#define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD
+
+#define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
+#define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
+
+#define ATOM_S6_ACC_REQ_CRT1 0x00010000L
+#define ATOM_S6_ACC_REQ_LCD1 0x00020000L
+#define ATOM_S6_ACC_REQ_TV1 0x00040000L
+#define ATOM_S6_ACC_REQ_DFP1 0x00080000L
+#define ATOM_S6_ACC_REQ_CRT2 0x00100000L
+#define ATOM_S6_ACC_REQ_LCD2 0x00200000L
+#define ATOM_S6_ACC_REQ_DFP6 0x00400000L
+#define ATOM_S6_ACC_REQ_DFP2 0x00800000L
+#define ATOM_S6_ACC_REQ_CV 0x01000000L
+#define ATOM_S6_ACC_REQ_DFP3 0x02000000L
+#define ATOM_S6_ACC_REQ_DFP4 0x04000000L
+#define ATOM_S6_ACC_REQ_DFP5 0x08000000L
+
+#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
+
+//Byte aligned defintion for BIOS usage
+#define ATOM_S6_DEVICE_CHANGEb0 0x01
+#define ATOM_S6_SCALER_CHANGEb0 0x02
+#define ATOM_S6_LID_CHANGEb0 0x04
+#define ATOM_S6_DOCKING_CHANGEb0 0x08
+#define ATOM_S6_ACC_MODEb0 0x10
+#define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
+#define ATOM_S6_LID_STATEb0 0x40
+#define ATOM_S6_DOCK_STATEb0 0x80
+#define ATOM_S6_CRITICAL_STATEb1 0x01
+#define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
+#define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
+#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
+#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
+
+#define ATOM_S6_ACC_REQ_CRT1b2 0x01
+#define ATOM_S6_ACC_REQ_LCD1b2 0x02
+#define ATOM_S6_ACC_REQ_TV1b2 0x04
+#define ATOM_S6_ACC_REQ_DFP1b2 0x08
+#define ATOM_S6_ACC_REQ_CRT2b2 0x10
+#define ATOM_S6_ACC_REQ_LCD2b2 0x20
+#define ATOM_S6_ACC_REQ_DFP6b2 0x40
+#define ATOM_S6_ACC_REQ_DFP2b2 0x80
+#define ATOM_S6_ACC_REQ_CVb3 0x01
+#define ATOM_S6_ACC_REQ_DFP3b3 0x02
+#define ATOM_S6_ACC_REQ_DFP4b3 0x04
+#define ATOM_S6_ACC_REQ_DFP5b3 0x08
+
+#define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
+#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
+
+#define ATOM_S6_DEVICE_CHANGE_SHIFT 0
+#define ATOM_S6_SCALER_CHANGE_SHIFT 1
+#define ATOM_S6_LID_CHANGE_SHIFT 2
+#define ATOM_S6_DOCKING_CHANGE_SHIFT 3
+#define ATOM_S6_ACC_MODE_SHIFT 4
+#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
+#define ATOM_S6_LID_STATE_SHIFT 6
+#define ATOM_S6_DOCK_STATE_SHIFT 7
+#define ATOM_S6_CRITICAL_STATE_SHIFT 8
+#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
+#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
+#define ATOM_S6_REQ_SCALER_SHIFT 12
+#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
+#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
+#define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
+
+// BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
+#define ATOM_S7_DOS_MODE_TYPEb0 0x03
+#define ATOM_S7_DOS_MODE_VGAb0 0x00
+#define ATOM_S7_DOS_MODE_VESAb0 0x01
+#define ATOM_S7_DOS_MODE_EXTb0 0x02
+#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
+#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
+#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
+#define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02
+#define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200
+#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
+
+#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
+
+// BIOS_8_SCRATCH Definition
+#define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
+#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
+
+#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
+#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
+
+// BIOS_9_SCRATCH Definition
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
+#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
+#endif
+
+
+#define ATOM_FLAG_SET 0x20
+#define ATOM_FLAG_CLEAR 0
+#define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
+#define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
+#define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
+
+/****************************************************************************/
+//Portion II: Definitinos only used in Driver
+/****************************************************************************/
+
+// Macros used by driver
+
+#ifdef __cplusplus
+#define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast<char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<char*>(0))/sizeof(USHORT))
+
+#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevision )&0x3F)
+#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevision)&0x3F)
+#else // not __cplusplus
+#define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char*)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*)0)->FieldName)-(char*)0)/sizeof(USHORT))
+
+#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
+#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
+#endif // __cplusplus
+
+#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
+#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
+
+/****************************************************************************/
+//Portion III: Definitinos only used in VBIOS
+/****************************************************************************/
+#define ATOM_DAC_SRC 0x80
+#define ATOM_SRC_DAC1 0
+#define ATOM_SRC_DAC2 0x80
+
+
+
+typedef struct _MEMORY_PLLINIT_PARAMETERS
+{
+ ULONG ulTargetMemoryClock; //In 10Khz unit
+ UCHAR ucAction; //not define yet
+ UCHAR ucFbDiv_Hi; //Fbdiv Hi byte
+ UCHAR ucFbDiv; //FB value
+ UCHAR ucPostDiv; //Post div
+}MEMORY_PLLINIT_PARAMETERS;
+
+#define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
+
+
+#define GPIO_PIN_WRITE 0x01
+#define GPIO_PIN_READ 0x00
+
+typedef struct _GPIO_PIN_CONTROL_PARAMETERS
+{
+ UCHAR ucGPIO_ID; //return value, read from GPIO pins
+ UCHAR ucGPIOBitShift; //define which bit in uGPIOBitVal need to be update
+ UCHAR ucGPIOBitVal; //Set/Reset corresponding bit defined in ucGPIOBitMask
+ UCHAR ucAction; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
+}GPIO_PIN_CONTROL_PARAMETERS;
+
+typedef struct _ENABLE_SCALER_PARAMETERS
+{
+ UCHAR ucScaler; // ATOM_SCALER1, ATOM_SCALER2
+ UCHAR ucEnable; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
+ UCHAR ucTVStandard; //
+ UCHAR ucPadding[1];
+}ENABLE_SCALER_PARAMETERS;
+#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
+
+//ucEnable:
+#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
+#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
+#define SCALER_ENABLE_2TAP_ALPHA_MODE 2
+#define SCALER_ENABLE_MULTITAP_MODE 3
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
+{
+ ULONG usHWIconHorzVertPosn; // Hardware Icon Vertical position
+ UCHAR ucHWIconVertOffset; // Hardware Icon Vertical offset
+ UCHAR ucHWIconHorzOffset; // Hardware Icon Horizontal offset
+ UCHAR ucSelection; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+}ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
+{
+ ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
+ ENABLE_CRTC_PARAMETERS sReserved;
+}ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
+{
+ USHORT usHight; // Image Hight
+ USHORT usWidth; // Image Width
+ UCHAR ucSurface; // Surface 1 or 2
+ UCHAR ucPadding[3];
+}ENABLE_GRAPH_SURFACE_PARAMETERS;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
+{
+ USHORT usHight; // Image Hight
+ USHORT usWidth; // Image Width
+ UCHAR ucSurface; // Surface 1 or 2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[2];
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
+{
+ USHORT usHight; // Image Hight
+ USHORT usWidth; // Image Width
+ UCHAR ucSurface; // Surface 1 or 2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0.
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
+{
+ USHORT usHight; // Image Hight
+ USHORT usWidth; // Image Width
+ USHORT usGraphPitch;
+ UCHAR ucColorDepth;
+ UCHAR ucPixelFormat;
+ UCHAR ucSurface; // Surface 1 or 2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucModeType;
+ UCHAR ucReserved;
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
+
+// ucEnable
+#define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f
+#define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10
+
+typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
+{
+ ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
+ ENABLE_YUV_PS_ALLOCATION sReserved; // Don't set this one
+}ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
+
+typedef struct _MEMORY_CLEAN_UP_PARAMETERS
+{
+ USHORT usMemoryStart; //in 8Kb boundry, offset from memory base address
+ USHORT usMemorySize; //8Kb blocks aligned
+}MEMORY_CLEAN_UP_PARAMETERS;
+
+#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
+
+typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
+{
+ USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC
+ USHORT usY_Size;
+}GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
+
+typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
+{
+ union{
+ USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC
+ USHORT usSurface;
+ };
+ USHORT usY_Size;
+ USHORT usDispXStart;
+ USHORT usDispYStart;
+}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2;
+
+
+typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3
+{
+ UCHAR ucLutId;
+ UCHAR ucAction;
+ USHORT usLutStartIndex;
+ USHORT usLutLength;
+ USHORT usLutOffsetInVram;
+}PALETTE_DATA_CONTROL_PARAMETERS_V3;
+
+// ucAction:
+#define PALETTE_DATA_AUTO_FILL 1
+#define PALETTE_DATA_READ 2
+#define PALETTE_DATA_WRITE 3
+
+
+typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
+{
+ UCHAR ucInterruptId;
+ UCHAR ucServiceId;
+ UCHAR ucStatus;
+ UCHAR ucReserved;
+}INTERRUPT_SERVICE_PARAMETER_V2;
+
+// ucInterruptId
+#define HDP1_INTERRUPT_ID 1
+#define HDP2_INTERRUPT_ID 2
+#define HDP3_INTERRUPT_ID 3
+#define HDP4_INTERRUPT_ID 4
+#define HDP5_INTERRUPT_ID 5
+#define HDP6_INTERRUPT_ID 6
+#define SW_INTERRUPT_ID 11
+
+// ucAction
+#define INTERRUPT_SERVICE_GEN_SW_INT 1
+#define INTERRUPT_SERVICE_GET_STATUS 2
+
+ // ucStatus
+#define INTERRUPT_STATUS__INT_TRIGGER 1
+#define INTERRUPT_STATUS__HPD_HIGH 2
+
+typedef struct _EFUSE_INPUT_PARAMETER
+{
+ USHORT usEfuseIndex;
+ UCHAR ucBitShift;
+ UCHAR ucBitLength;
+}EFUSE_INPUT_PARAMETER;
+
+// ReadEfuseValue command table input/output parameter
+typedef union _READ_EFUSE_VALUE_PARAMETER
+{
+ EFUSE_INPUT_PARAMETER sEfuse;
+ ULONG ulEfuseValue;
+}READ_EFUSE_VALUE_PARAMETER;
+
+typedef struct _INDIRECT_IO_ACCESS
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR IOAccessSequence[256];
+} INDIRECT_IO_ACCESS;
+
+#define INDIRECT_READ 0x00
+#define INDIRECT_WRITE 0x80
+
+#define INDIRECT_IO_MM 0
+#define INDIRECT_IO_PLL 1
+#define INDIRECT_IO_MC 2
+#define INDIRECT_IO_PCIE 3
+#define INDIRECT_IO_PCIEP 4
+#define INDIRECT_IO_NBMISC 5
+#define INDIRECT_IO_SMU 5
+
+#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
+#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
+#define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
+#define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
+#define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
+#define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
+#define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
+#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
+#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
+#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
+#define INDIRECT_IO_SMU_READ INDIRECT_IO_SMU | INDIRECT_READ
+#define INDIRECT_IO_SMU_WRITE INDIRECT_IO_SMU | INDIRECT_WRITE
+
+
+typedef struct _ATOM_OEM_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+}ATOM_OEM_INFO;
+
+typedef struct _ATOM_TV_MODE
+{
+ UCHAR ucVMode_Num; //Video mode number
+ UCHAR ucTV_Mode_Num; //Internal TV mode number
+}ATOM_TV_MODE;
+
+typedef struct _ATOM_BIOS_INT_TVSTD_MODE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usTV_Mode_LUT_Offset; // Pointer to standard to internal number conversion table
+ USHORT usTV_FIFO_Offset; // Pointer to FIFO entry table
+ USHORT usNTSC_Tbl_Offset; // Pointer to SDTV_Mode_NTSC table
+ USHORT usPAL_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
+ USHORT usCV_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
+}ATOM_BIOS_INT_TVSTD_MODE;
+
+
+typedef struct _ATOM_TV_MODE_SCALER_PTR
+{
+ USHORT ucFilter0_Offset; //Pointer to filter format 0 coefficients
+ USHORT usFilter1_Offset; //Pointer to filter format 0 coefficients
+ UCHAR ucTV_Mode_Num;
+}ATOM_TV_MODE_SCALER_PTR;
+
+typedef struct _ATOM_STANDARD_VESA_TIMING
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation
+}ATOM_STANDARD_VESA_TIMING;
+
+
+typedef struct _ATOM_STD_FORMAT
+{
+ USHORT usSTD_HDisp;
+ USHORT usSTD_VDisp;
+ USHORT usSTD_RefreshRate;
+ USHORT usReserved;
+}ATOM_STD_FORMAT;
+
+typedef struct _ATOM_VESA_TO_EXTENDED_MODE
+{
+ USHORT usVESA_ModeNumber;
+ USHORT usExtendedModeNumber;
+}ATOM_VESA_TO_EXTENDED_MODE;
+
+typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
+}ATOM_VESA_TO_INTENAL_MODE_LUT;
+
+/*************** ATOM Memory Related Data Structure ***********************/
+typedef struct _ATOM_MEMORY_VENDOR_BLOCK{
+ UCHAR ucMemoryType;
+ UCHAR ucMemoryVendor;
+ UCHAR ucAdjMCId;
+ UCHAR ucDynClkId;
+ ULONG ulDllResetClkRange;
+}ATOM_MEMORY_VENDOR_BLOCK;
+
+
+typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{
+#if ATOM_BIG_ENDIAN
+ ULONG ucMemBlkId:8;
+ ULONG ulMemClockRange:24;
+#else
+ ULONG ulMemClockRange:24;
+ ULONG ucMemBlkId:8;
+#endif
+}ATOM_MEMORY_SETTING_ID_CONFIG;
+
+typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
+{
+ ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
+ ULONG ulAccess;
+}ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
+
+
+typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{
+ ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
+ ULONG aulMemData[1];
+}ATOM_MEMORY_SETTING_DATA_BLOCK;
+
+
+typedef struct _ATOM_INIT_REG_INDEX_FORMAT{
+ USHORT usRegIndex; // MC register index
+ UCHAR ucPreRegDataLength; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
+}ATOM_INIT_REG_INDEX_FORMAT;
+
+
+typedef struct _ATOM_INIT_REG_BLOCK{
+ USHORT usRegIndexTblSize; //size of asRegIndexBuf
+ USHORT usRegDataBlkSize; //size of ATOM_MEMORY_SETTING_DATA_BLOCK
+ ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
+ ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
+}ATOM_INIT_REG_BLOCK;
+
+#define END_OF_REG_INDEX_BLOCK 0x0ffff
+#define END_OF_REG_DATA_BLOCK 0x00000000
+#define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS
+#define CLOCK_RANGE_HIGHEST 0x00ffffff
+
+#define VALUE_DWORD SIZEOF ULONG
+#define VALUE_SAME_AS_ABOVE 0
+#define VALUE_MASK_DWORD 0x84
+
+#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
+#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
+#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
+//#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code
+#define ACCESS_PLACEHOLDER 0x80
+
+
+typedef struct _ATOM_MC_INIT_PARAM_TABLE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usAdjustARB_SEQDataOffset;
+ USHORT usMCInitMemTypeTblOffset;
+ USHORT usMCInitCommonTblOffset;
+ USHORT usMCInitPowerDownTblOffset;
+ ULONG ulARB_SEQDataBuf[32];
+ ATOM_INIT_REG_BLOCK asMCInitMemType;
+ ATOM_INIT_REG_BLOCK asMCInitCommon;
+}ATOM_MC_INIT_PARAM_TABLE;
+
+
+typedef struct _ATOM_REG_INIT_SETTING
+{
+ USHORT usRegIndex;
+ ULONG ulRegValue;
+}ATOM_REG_INIT_SETTING;
+
+typedef struct _ATOM_MC_INIT_PARAM_TABLE_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulMCUcodeVersion;
+ ULONG ulMCUcodeRomStartAddr;
+ ULONG ulMCUcodeLength;
+ USHORT usMcRegInitTableOffset; // offset of ATOM_REG_INIT_SETTING array for MC core register settings.
+ USHORT usReserved; // offset of ATOM_INIT_REG_BLOCK for MC SEQ/PHY regsiter setting
+}ATOM_MC_INIT_PARAM_TABLE_V2_1;
+
+
+#define _4Mx16 0x2
+#define _4Mx32 0x3
+#define _8Mx16 0x12
+#define _8Mx32 0x13
+#define _8Mx128 0x15
+#define _16Mx16 0x22
+#define _16Mx32 0x23
+#define _16Mx128 0x25
+#define _32Mx16 0x32
+#define _32Mx32 0x33
+#define _32Mx128 0x35
+#define _64Mx32 0x43
+#define _64Mx8 0x41
+#define _64Mx16 0x42
+#define _128Mx8 0x51
+#define _128Mx16 0x52
+#define _128Mx32 0x53
+#define _256Mx8 0x61
+#define _256Mx16 0x62
+#define _512Mx8 0x71
+
+
+#define SAMSUNG 0x1
+#define INFINEON 0x2
+#define ELPIDA 0x3
+#define ETRON 0x4
+#define NANYA 0x5
+#define HYNIX 0x6
+#define MOSEL 0x7
+#define WINBOND 0x8
+#define ESMT 0x9
+#define MICRON 0xF
+
+#define QIMONDA INFINEON
+#define PROMOS MOSEL
+#define KRETON INFINEON
+#define ELIXIR NANYA
+#define MEZZA ELPIDA
+
+
+/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
+
+#define UCODE_ROM_START_ADDRESS 0x1b800
+#define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
+
+//uCode block header for reference
+
+typedef struct _MCuCodeHeader
+{
+ ULONG ulSignature;
+ UCHAR ucRevision;
+ UCHAR ucChecksum;
+ UCHAR ucReserved1;
+ UCHAR ucReserved2;
+ USHORT usParametersLength;
+ USHORT usUCodeLength;
+ USHORT usReserved1;
+ USHORT usReserved2;
+} MCuCodeHeader;
+
+//////////////////////////////////////////////////////////////////////////////////
+
+#define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
+
+#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
+typedef struct _ATOM_VRAM_MODULE_V1
+{
+ ULONG ulReserved;
+ USHORT usEMRSValue;
+ USHORT usMRSValue;
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
+ UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender
+ UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
+ UCHAR ucRow; // Number of Row,in power of 2;
+ UCHAR ucColumn; // Number of Column,in power of 2;
+ UCHAR ucBank; // Nunber of Bank;
+ UCHAR ucRank; // Number of Rank, in power of 2
+ UCHAR ucChannelNum; // Number of channel;
+ UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
+ UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
+ UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
+ UCHAR ucReserved[2];
+}ATOM_VRAM_MODULE_V1;
+
+
+typedef struct _ATOM_VRAM_MODULE_V2
+{
+ ULONG ulReserved;
+ ULONG ulFlags; // To enable/disable functionalities based on memory type
+ ULONG ulEngineClock; // Override of default engine clock for particular memory type
+ ULONG ulMemoryClock; // Override of default memory clock for particular memory type
+ USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usEMRSValue;
+ USHORT usMRSValue;
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
+ UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
+ UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
+ UCHAR ucRow; // Number of Row,in power of 2;
+ UCHAR ucColumn; // Number of Column,in power of 2;
+ UCHAR ucBank; // Nunber of Bank;
+ UCHAR ucRank; // Number of Rank, in power of 2
+ UCHAR ucChannelNum; // Number of channel;
+ UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
+ UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
+ UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
+ UCHAR ucRefreshRateFactor;
+ UCHAR ucReserved[3];
+}ATOM_VRAM_MODULE_V2;
+
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT
+{
+ ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
+ union{
+ USHORT usMRS; // mode register
+ USHORT usDDR3_MR0;
+ };
+ union{
+ USHORT usEMRS; // extended mode register
+ USHORT usDDR3_MR1;
+ };
+ UCHAR ucCL; // CAS latency
+ UCHAR ucWL; // WRITE Latency
+ UCHAR uctRAS; // tRAS
+ UCHAR uctRC; // tRC
+ UCHAR uctRFC; // tRFC
+ UCHAR uctRCDR; // tRCDR
+ UCHAR uctRCDW; // tRCDW
+ UCHAR uctRP; // tRP
+ UCHAR uctRRD; // tRRD
+ UCHAR uctWR; // tWR
+ UCHAR uctWTR; // tWTR
+ UCHAR uctPDIX; // tPDIX
+ UCHAR uctFAW; // tFAW
+ UCHAR uctAOND; // tAOND
+ union
+ {
+ struct {
+ UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
+ UCHAR ucReserved;
+ };
+ USHORT usDDR3_MR2;
+ };
+}ATOM_MEMORY_TIMING_FORMAT;
+
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1
+{
+ ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
+ USHORT usMRS; // mode register
+ USHORT usEMRS; // extended mode register
+ UCHAR ucCL; // CAS latency
+ UCHAR ucWL; // WRITE Latency
+ UCHAR uctRAS; // tRAS
+ UCHAR uctRC; // tRC
+ UCHAR uctRFC; // tRFC
+ UCHAR uctRCDR; // tRCDR
+ UCHAR uctRCDW; // tRCDW
+ UCHAR uctRP; // tRP
+ UCHAR uctRRD; // tRRD
+ UCHAR uctWR; // tWR
+ UCHAR uctWTR; // tWTR
+ UCHAR uctPDIX; // tPDIX
+ UCHAR uctFAW; // tFAW
+ UCHAR uctAOND; // tAOND
+ UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
+////////////////////////////////////GDDR parameters///////////////////////////////////
+ UCHAR uctCCDL; //
+ UCHAR uctCRCRL; //
+ UCHAR uctCRCWL; //
+ UCHAR uctCKE; //
+ UCHAR uctCKRSE; //
+ UCHAR uctCKRSX; //
+ UCHAR uctFAW32; //
+ UCHAR ucMR5lo; //
+ UCHAR ucMR5hi; //
+ UCHAR ucTerminator;
+}ATOM_MEMORY_TIMING_FORMAT_V1;
+
+
+
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT_V2
+{
+ ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
+ USHORT usMRS; // mode register
+ USHORT usEMRS; // extended mode register
+ UCHAR ucCL; // CAS latency
+ UCHAR ucWL; // WRITE Latency
+ UCHAR uctRAS; // tRAS
+ UCHAR uctRC; // tRC
+ UCHAR uctRFC; // tRFC
+ UCHAR uctRCDR; // tRCDR
+ UCHAR uctRCDW; // tRCDW
+ UCHAR uctRP; // tRP
+ UCHAR uctRRD; // tRRD
+ UCHAR uctWR; // tWR
+ UCHAR uctWTR; // tWTR
+ UCHAR uctPDIX; // tPDIX
+ UCHAR uctFAW; // tFAW
+ UCHAR uctAOND; // tAOND
+ UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
+////////////////////////////////////GDDR parameters///////////////////////////////////
+ UCHAR uctCCDL; //
+ UCHAR uctCRCRL; //
+ UCHAR uctCRCWL; //
+ UCHAR uctCKE; //
+ UCHAR uctCKRSE; //
+ UCHAR uctCKRSX; //
+ UCHAR uctFAW32; //
+ UCHAR ucMR4lo; //
+ UCHAR ucMR4hi; //
+ UCHAR ucMR5lo; //
+ UCHAR ucMR5hi; //
+ UCHAR ucTerminator;
+ UCHAR ucReserved;
+}ATOM_MEMORY_TIMING_FORMAT_V2;
+
+
+typedef struct _ATOM_MEMORY_FORMAT
+{
+ ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock
+ union{
+ USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usDDR3_Reserved; // Not used for DDR3 memory
+ };
+ union{
+ USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usDDR3_MR3; // Used for DDR3 memory
+ };
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
+ UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
+ UCHAR ucRow; // Number of Row,in power of 2;
+ UCHAR ucColumn; // Number of Column,in power of 2;
+ UCHAR ucBank; // Nunber of Bank;
+ UCHAR ucRank; // Number of Rank, in power of 2
+ UCHAR ucBurstSize; // burst size, 0= burst size=4 1= burst size=8
+ UCHAR ucDllDisBit; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
+ UCHAR ucRefreshRateFactor; // memory refresh rate in unit of ms
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemAttrib; // Memory Device Addribute, like RDBI/WDBI etc
+ ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; // Memory Timing block sort from lower clock to higher clock
+}ATOM_MEMORY_FORMAT;
+
+
+typedef struct _ATOM_VRAM_MODULE_V3
+{
+ ULONG ulChannelMapCfg; // board dependent paramenter:Channel combination
+ USHORT usSize; // size of ATOM_VRAM_MODULE_V3
+ USHORT usDefaultMVDDQ; // board dependent parameter:Default Memory Core Voltage
+ USHORT usDefaultMVDDC; // board dependent parameter:Default Memory IO Voltage
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucChannelNum; // board dependent parameter:Number of channel;
+ UCHAR ucChannelSize; // board dependent parameter:32bit or 64bit
+ UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv
+ UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
+ UCHAR ucFlag; // To enable/disable functionalities based on memory type
+ ATOM_MEMORY_FORMAT asMemory; // describ all of video memory parameters from memory spec
+}ATOM_VRAM_MODULE_V3;
+
+
+//ATOM_VRAM_MODULE_V3.ucNPL_RT
+#define NPL_RT_MASK 0x0f
+#define BATTERY_ODT_MASK 0xc0
+
+#define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
+
+typedef struct _ATOM_VRAM_MODULE_V4
+{
+ ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
+ USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
+ USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
+ UCHAR ucChannelNum; // Number of channels present in this module config
+ UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucFlag; // To enable/disable functionalities based on memory type
+ UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
+ UCHAR ucVREFI; // board dependent parameter
+ UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
+ UCHAR ucReserved[3];
+
+//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
+ union{
+ USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usDDR3_Reserved;
+ };
+ union{
+ USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usDDR3_MR3; // Used for DDR3 memory
+ };
+ UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucReserved2[2];
+ ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
+}ATOM_VRAM_MODULE_V4;
+
+#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
+#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
+#define VRAM_MODULE_V4_MISC_BL_MASK 0x4
+#define VRAM_MODULE_V4_MISC_BL8 0x4
+#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
+
+typedef struct _ATOM_VRAM_MODULE_V5
+{
+ ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
+ USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
+ USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
+ UCHAR ucChannelNum; // Number of channels present in this module config
+ UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucFlag; // To enable/disable functionalities based on memory type
+ UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
+ UCHAR ucVREFI; // board dependent parameter
+ UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
+ UCHAR ucReserved[3];
+
+//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
+ USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
+ UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
+ UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
+ ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
+}ATOM_VRAM_MODULE_V5;
+
+
+typedef struct _ATOM_VRAM_MODULE_V6
+{
+ ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
+ USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
+ USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
+ UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
+ UCHAR ucChannelNum; // Number of channels present in this module config
+ UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucFlag; // To enable/disable functionalities based on memory type
+ UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
+ UCHAR ucVREFI; // board dependent parameter
+ UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
+ // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
+ UCHAR ucReserved[3];
+
+//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
+ USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
+ USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
+ UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
+ UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
+ ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
+}ATOM_VRAM_MODULE_V6;
+
+typedef struct _ATOM_VRAM_MODULE_V7
+{
+// Design Specific Values
+ ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP
+ USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7
+ USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usEnableChannels; // bit vector which indicate which channels are enabled
+ UCHAR ucExtMemoryID; // Current memory module ID
+ UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
+ UCHAR ucChannelNum; // Number of mem. channels supported in this module
+ UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucReserve; // In MC7x, the lower 4 bits are used as bit8-11 of memory size. In other MC code, it's not used.
+ UCHAR ucMisc; // RANK_OF_THISMEMORY etc.
+ UCHAR ucVREFI; // Not used.
+ UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
+ USHORT usSEQSettingOffset;
+ UCHAR ucReserved;
+// Memory Module specific values
+ USHORT usEMRS2Value; // EMRS2/MR2 Value.
+ USHORT usEMRS3Value; // EMRS3/MR3 Value.
+ UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory
+ UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
+ char strMemPNString[20]; // part number end with '0'.
+}ATOM_VRAM_MODULE_V7;
+
+
+typedef struct _ATOM_VRAM_MODULE_V8
+{
+// Design Specific Values
+ ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP
+ USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7
+ USHORT usMcRamCfg; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usEnableChannels; // bit vector which indicate which channels are enabled
+ UCHAR ucExtMemoryID; // Current memory module ID
+ UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
+ UCHAR ucChannelNum; // Number of mem. channels supported in this module
+ UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucBankCol; // bit[3:2]= BANK ( =2:16bank, =1:8bank, =0:4bank ) bit[1:0]=Col ( =2: 10 bit, =1:9bit, =0:8bit )
+ UCHAR ucMisc; // RANK_OF_THISMEMORY etc.
+ UCHAR ucVREFI; // Not used.
+ USHORT usReserved; // Not used
+ USHORT usMemorySize; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
+ UCHAR ucMcTunningSetId; // MC phy registers set per.
+ UCHAR ucRowNum;
+// Memory Module specific values
+ USHORT usEMRS2Value; // EMRS2/MR2 Value.
+ USHORT usEMRS3Value; // EMRS3/MR3 Value.
+ UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory
+ UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
+
+ ULONG ulChannelMapCfg1; // channel mapping for channel8~15
+ ULONG ulBankMapCfg;
+ ULONG ulReserved;
+ char strMemPNString[20]; // part number end with '0'.
+}ATOM_VRAM_MODULE_V8;
+
+
+typedef struct _ATOM_VRAM_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+}ATOM_VRAM_INFO_V2;
+
+typedef struct _ATOM_VRAM_INFO_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usRerseved;
+ UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+ ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
+
+}ATOM_VRAM_INFO_V3;
+
+#define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
+
+typedef struct _ATOM_VRAM_INFO_V4
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usRerseved;
+ UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
+ ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
+ UCHAR ucReservde[4];
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+ ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
+}ATOM_VRAM_INFO_V4;
+
+typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
+ USHORT usReserved[3];
+ UCHAR ucNumOfVRAMModule; // indicate number of VRAM module
+ UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list
+ UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version
+ UCHAR ucReserved;
+ ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+}ATOM_VRAM_INFO_HEADER_V2_1;
+
+typedef struct _ATOM_VRAM_INFO_HEADER_V2_2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usMcAdjustPerTileTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
+ USHORT usMcPhyInitTableOffset; // offset of ATOM_INIT_REG_BLOCK structure for MC phy init set
+ USHORT usDramDataRemapTblOffset; // offset of ATOM_DRAM_DATA_REMAP array to indicate DRAM data lane to GPU mapping
+ USHORT usReserved1;
+ UCHAR ucNumOfVRAMModule; // indicate number of VRAM module
+ UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list
+ UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version
+ UCHAR ucMcPhyTileNum; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
+ ATOM_VRAM_MODULE_V8 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+}ATOM_VRAM_INFO_HEADER_V2_2;
+
+
+typedef struct _ATOM_DRAM_DATA_REMAP
+{
+ UCHAR ucByteRemapCh0;
+ UCHAR ucByteRemapCh1;
+ ULONG ulByte0BitRemapCh0;
+ ULONG ulByte1BitRemapCh0;
+ ULONG ulByte2BitRemapCh0;
+ ULONG ulByte3BitRemapCh0;
+ ULONG ulByte0BitRemapCh1;
+ ULONG ulByte1BitRemapCh1;
+ ULONG ulByte2BitRemapCh1;
+ ULONG ulByte3BitRemapCh1;
+}ATOM_DRAM_DATA_REMAP;
+
+typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator
+}ATOM_VRAM_GPIO_DETECTION_INFO;
+
+
+typedef struct _ATOM_MEMORY_TRAINING_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucTrainingLoop;
+ UCHAR ucReserved[3];
+ ATOM_INIT_REG_BLOCK asMemTrainingSetting;
+}ATOM_MEMORY_TRAINING_INFO;
+
+
+typedef struct SW_I2C_CNTL_DATA_PARAMETERS
+{
+ UCHAR ucControl;
+ UCHAR ucData;
+ UCHAR ucSatus;
+ UCHAR ucTemp;
+} SW_I2C_CNTL_DATA_PARAMETERS;
+
+#define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
+
+typedef struct _SW_I2C_IO_DATA_PARAMETERS
+{
+ USHORT GPIO_Info;
+ UCHAR ucAct;
+ UCHAR ucData;
+ } SW_I2C_IO_DATA_PARAMETERS;
+
+#define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
+
+/****************************SW I2C CNTL DEFINITIONS**********************/
+#define SW_I2C_IO_RESET 0
+#define SW_I2C_IO_GET 1
+#define SW_I2C_IO_DRIVE 2
+#define SW_I2C_IO_SET 3
+#define SW_I2C_IO_START 4
+
+#define SW_I2C_IO_CLOCK 0
+#define SW_I2C_IO_DATA 0x80
+
+#define SW_I2C_IO_ZERO 0
+#define SW_I2C_IO_ONE 0x100
+
+#define SW_I2C_CNTL_READ 0
+#define SW_I2C_CNTL_WRITE 1
+#define SW_I2C_CNTL_START 2
+#define SW_I2C_CNTL_STOP 3
+#define SW_I2C_CNTL_OPEN 4
+#define SW_I2C_CNTL_CLOSE 5
+#define SW_I2C_CNTL_WRITE1BIT 6
+
+//==============================VESA definition Portion===============================
+#define VESA_OEM_PRODUCT_REV '01.00'
+#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support
+#define VESA_MODE_WIN_ATTRIBUTE 7
+#define VESA_WIN_SIZE 64
+
+typedef struct _PTR_32_BIT_STRUCTURE
+{
+ USHORT Offset16;
+ USHORT Segment16;
+} PTR_32_BIT_STRUCTURE;
+
+typedef union _PTR_32_BIT_UNION
+{
+ PTR_32_BIT_STRUCTURE SegmentOffset;
+ ULONG Ptr32_Bit;
+} PTR_32_BIT_UNION;
+
+typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
+{
+ UCHAR VbeSignature[4];
+ USHORT VbeVersion;
+ PTR_32_BIT_UNION OemStringPtr;
+ UCHAR Capabilities[4];
+ PTR_32_BIT_UNION VideoModePtr;
+ USHORT TotalMemory;
+} VBE_1_2_INFO_BLOCK_UPDATABLE;
+
+
+typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
+{
+ VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
+ USHORT OemSoftRev;
+ PTR_32_BIT_UNION OemVendorNamePtr;
+ PTR_32_BIT_UNION OemProductNamePtr;
+ PTR_32_BIT_UNION OemProductRevPtr;
+} VBE_2_0_INFO_BLOCK_UPDATABLE;
+
+typedef union _VBE_VERSION_UNION
+{
+ VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
+ VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
+} VBE_VERSION_UNION;
+
+typedef struct _VBE_INFO_BLOCK
+{
+ VBE_VERSION_UNION UpdatableVBE_Info;
+ UCHAR Reserved[222];
+ UCHAR OemData[256];
+} VBE_INFO_BLOCK;
+
+typedef struct _VBE_FP_INFO
+{
+ USHORT HSize;
+ USHORT VSize;
+ USHORT FPType;
+ UCHAR RedBPP;
+ UCHAR GreenBPP;
+ UCHAR BlueBPP;
+ UCHAR ReservedBPP;
+ ULONG RsvdOffScrnMemSize;
+ ULONG RsvdOffScrnMEmPtr;
+ UCHAR Reserved[14];
+} VBE_FP_INFO;
+
+typedef struct _VESA_MODE_INFO_BLOCK
+{
+// Mandatory information for all VBE revisions
+ USHORT ModeAttributes; // dw ? ; mode attributes
+ UCHAR WinAAttributes; // db ? ; window A attributes
+ UCHAR WinBAttributes; // db ? ; window B attributes
+ USHORT WinGranularity; // dw ? ; window granularity
+ USHORT WinSize; // dw ? ; window size
+ USHORT WinASegment; // dw ? ; window A start segment
+ USHORT WinBSegment; // dw ? ; window B start segment
+ ULONG WinFuncPtr; // dd ? ; real mode pointer to window function
+ USHORT BytesPerScanLine;// dw ? ; bytes per scan line
+
+//; Mandatory information for VBE 1.2 and above
+ USHORT XResolution; // dw ? ; horizontal resolution in pixels or characters
+ USHORT YResolution; // dw ? ; vertical resolution in pixels or characters
+ UCHAR XCharSize; // db ? ; character cell width in pixels
+ UCHAR YCharSize; // db ? ; character cell height in pixels
+ UCHAR NumberOfPlanes; // db ? ; number of memory planes
+ UCHAR BitsPerPixel; // db ? ; bits per pixel
+ UCHAR NumberOfBanks; // db ? ; number of banks
+ UCHAR MemoryModel; // db ? ; memory model type
+ UCHAR BankSize; // db ? ; bank size in KB
+ UCHAR NumberOfImagePages;// db ? ; number of images
+ UCHAR ReservedForPageFunction;//db 1 ; reserved for page function
+
+//; Direct Color fields(required for direct/6 and YUV/7 memory models)
+ UCHAR RedMaskSize; // db ? ; size of direct color red mask in bits
+ UCHAR RedFieldPosition; // db ? ; bit position of lsb of red mask
+ UCHAR GreenMaskSize; // db ? ; size of direct color green mask in bits
+ UCHAR GreenFieldPosition; // db ? ; bit position of lsb of green mask
+ UCHAR BlueMaskSize; // db ? ; size of direct color blue mask in bits
+ UCHAR BlueFieldPosition; // db ? ; bit position of lsb of blue mask
+ UCHAR RsvdMaskSize; // db ? ; size of direct color reserved mask in bits
+ UCHAR RsvdFieldPosition; // db ? ; bit position of lsb of reserved mask
+ UCHAR DirectColorModeInfo;// db ? ; direct color mode attributes
+
+//; Mandatory information for VBE 2.0 and above
+ ULONG PhysBasePtr; // dd ? ; physical address for flat memory frame buffer
+ ULONG Reserved_1; // dd 0 ; reserved - always set to 0
+ USHORT Reserved_2; // dw 0 ; reserved - always set to 0
+
+//; Mandatory information for VBE 3.0 and above
+ USHORT LinBytesPerScanLine; // dw ? ; bytes per scan line for linear modes
+ UCHAR BnkNumberOfImagePages;// db ? ; number of images for banked modes
+ UCHAR LinNumberOfImagPages; // db ? ; number of images for linear modes
+ UCHAR LinRedMaskSize; // db ? ; size of direct color red mask(linear modes)
+ UCHAR LinRedFieldPosition; // db ? ; bit position of lsb of red mask(linear modes)
+ UCHAR LinGreenMaskSize; // db ? ; size of direct color green mask(linear modes)
+ UCHAR LinGreenFieldPosition;// db ? ; bit position of lsb of green mask(linear modes)
+ UCHAR LinBlueMaskSize; // db ? ; size of direct color blue mask(linear modes)
+ UCHAR LinBlueFieldPosition; // db ? ; bit position of lsb of blue mask(linear modes)
+ UCHAR LinRsvdMaskSize; // db ? ; size of direct color reserved mask(linear modes)
+ UCHAR LinRsvdFieldPosition; // db ? ; bit position of lsb of reserved mask(linear modes)
+ ULONG MaxPixelClock; // dd ? ; maximum pixel clock(in Hz) for graphics mode
+ UCHAR Reserved; // db 190 dup (0)
+} VESA_MODE_INFO_BLOCK;
+
+// BIOS function CALLS
+#define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code
+#define ATOM_BIOS_FUNCTION_COP_MODE 0x00
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
+#define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
+#define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
+#define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
+#define ATOM_BIOS_FUNCTION_STV_STD 0x16
+#define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
+#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
+
+#define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
+#define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
+#define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
+#define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80
+#define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80
+
+#define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
+#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
+#define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
+#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03
+#define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7
+#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state
+#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state
+#define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85
+#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89
+#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported
+
+
+#define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS
+#define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01
+#define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02
+#define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON.
+#define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY
+#define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND
+#define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF
+#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
+
+#define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
+#define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
+#define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
+
+// structure used for VBIOS only
+
+//DispOutInfoTable
+typedef struct _ASIC_TRANSMITTER_INFO
+{
+ USHORT usTransmitterObjId;
+ USHORT usSupportDevice;
+ UCHAR ucTransmitterCmdTblId;
+ UCHAR ucConfig;
+ UCHAR ucEncoderID; //available 1st encoder ( default )
+ UCHAR ucOptionEncoderID; //available 2nd encoder ( optional )
+ UCHAR uc2ndEncoderID;
+ UCHAR ucReserved;
+}ASIC_TRANSMITTER_INFO;
+
+#define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01
+#define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84
+
+typedef struct _ASIC_ENCODER_INFO
+{
+ UCHAR ucEncoderID;
+ UCHAR ucEncoderConfig;
+ USHORT usEncoderCmdTblId;
+}ASIC_ENCODER_INFO;
+
+typedef struct _ATOM_DISP_OUT_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT ptrTransmitterInfo;
+ USHORT ptrEncoderInfo;
+ ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
+ ASIC_ENCODER_INFO asEncoderInfo[1];
+}ATOM_DISP_OUT_INFO;
+
+
+typedef struct _ATOM_DISP_OUT_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT ptrTransmitterInfo;
+ USHORT ptrEncoderInfo;
+ USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary.
+ ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
+ ASIC_ENCODER_INFO asEncoderInfo[1];
+}ATOM_DISP_OUT_INFO_V2;
+
+
+typedef struct _ATOM_DISP_CLOCK_ID {
+ UCHAR ucPpllId;
+ UCHAR ucPpllAttribute;
+}ATOM_DISP_CLOCK_ID;
+
+// ucPpllAttribute
+#define CLOCK_SOURCE_SHAREABLE 0x01
+#define CLOCK_SOURCE_DP_MODE 0x02
+#define CLOCK_SOURCE_NONE_DP_MODE 0x04
+
+//DispOutInfoTable
+typedef struct _ASIC_TRANSMITTER_INFO_V2
+{
+ USHORT usTransmitterObjId;
+ USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object
+ UCHAR ucTransmitterCmdTblId;
+ UCHAR ucConfig;
+ UCHAR ucEncoderID; // available 1st encoder ( default )
+ UCHAR ucOptionEncoderID; // available 2nd encoder ( optional )
+ UCHAR uc2ndEncoderID;
+ UCHAR ucReserved;
+}ASIC_TRANSMITTER_INFO_V2;
+
+typedef struct _ATOM_DISP_OUT_INFO_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT ptrTransmitterInfo;
+ USHORT ptrEncoderInfo;
+ USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary.
+ USHORT usReserved;
+ UCHAR ucDCERevision;
+ UCHAR ucMaxDispEngineNum;
+ UCHAR ucMaxActiveDispEngineNum;
+ UCHAR ucMaxPPLLNum;
+ UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE
+ UCHAR ucDispCaps;
+ UCHAR ucReserved[2];
+ ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only
+}ATOM_DISP_OUT_INFO_V3;
+
+//ucDispCaps
+#define DISPLAY_CAPS__DP_PCLK_FROM_PPLL 0x01
+#define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED 0x02
+
+typedef enum CORE_REF_CLK_SOURCE{
+ CLOCK_SRC_XTALIN=0,
+ CLOCK_SRC_XO_IN=1,
+ CLOCK_SRC_XO_IN2=2,
+}CORE_REF_CLK_SOURCE;
+
+// DispDevicePriorityInfo
+typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT asDevicePriority[16];
+}ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
+
+//ProcessAuxChannelTransactionTable
+typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
+{
+ USHORT lpAuxRequest;
+ USHORT lpDataOut;
+ UCHAR ucChannelID;
+ union
+ {
+ UCHAR ucReplyStatus;
+ UCHAR ucDelay;
+ };
+ UCHAR ucDataOutLen;
+ UCHAR ucReserved;
+}PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
+
+//ProcessAuxChannelTransactionTable
+typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2
+{
+ USHORT lpAuxRequest;
+ USHORT lpDataOut;
+ UCHAR ucChannelID;
+ union
+ {
+ UCHAR ucReplyStatus;
+ UCHAR ucDelay;
+ };
+ UCHAR ucDataOutLen;
+ UCHAR ucHPD_ID; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
+}PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2;
+
+#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
+
+//GetSinkType
+
+typedef struct _DP_ENCODER_SERVICE_PARAMETERS
+{
+ USHORT ucLinkClock;
+ union
+ {
+ UCHAR ucConfig; // for DP training command
+ UCHAR ucI2cId; // use for GET_SINK_TYPE command
+ };
+ UCHAR ucAction;
+ UCHAR ucStatus;
+ UCHAR ucLaneNum;
+ UCHAR ucReserved[2];
+}DP_ENCODER_SERVICE_PARAMETERS;
+
+// ucAction
+#define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
+
+#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+
+typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2
+{
+ USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
+ UCHAR ucAuxId;
+ UCHAR ucAction;
+ UCHAR ucSinkType; // Iput and Output parameters.
+ UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
+ UCHAR ucReserved[2];
+}DP_ENCODER_SERVICE_PARAMETERS_V2;
+
+typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2
+{
+ DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam;
+ PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam;
+}DP_ENCODER_SERVICE_PS_ALLOCATION_V2;
+
+// ucAction
+#define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01
+#define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02
+
+
+// DP_TRAINING_TABLE
+#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
+#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
+#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 )
+#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 )
+#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
+#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
+#define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
+#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
+#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
+#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
+#define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
+#define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
+#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 84)
+
+
+typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
+{
+ UCHAR ucI2CSpeed;
+ union
+ {
+ UCHAR ucRegIndex;
+ UCHAR ucStatus;
+ };
+ USHORT lpI2CDataOut;
+ UCHAR ucFlag;
+ UCHAR ucTransBytes;
+ UCHAR ucSlaveAddr;
+ UCHAR ucLineNumber;
+}PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
+
+#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
+
+//ucFlag
+#define HW_I2C_WRITE 1
+#define HW_I2C_READ 0
+#define I2C_2BYTE_ADDR 0x02
+
+/****************************************************************************/
+// Structures used by HW_Misc_OperationTable
+/****************************************************************************/
+typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1
+{
+ UCHAR ucCmd; // Input: To tell which action to take
+ UCHAR ucReserved[3];
+ ULONG ulReserved;
+}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1;
+
+typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1
+{
+ UCHAR ucReturnCode; // Output: Return value base on action was taken
+ UCHAR ucReserved[3];
+ ULONG ulReserved;
+}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
+
+// Actions code
+#define ATOM_GET_SDI_SUPPORT 0xF0
+
+// Return code
+#define ATOM_UNKNOWN_CMD 0
+#define ATOM_FEATURE_NOT_SUPPORTED 1
+#define ATOM_FEATURE_SUPPORTED 2
+
+typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
+{
+ ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output;
+ PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved;
+}ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
+
+/****************************************************************************/
+
+typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
+{
+ UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ...
+ UCHAR ucReserved[3];
+}SET_HWBLOCK_INSTANCE_PARAMETER_V2;
+
+#define HWBLKINST_INSTANCE_MASK 0x07
+#define HWBLKINST_HWBLK_MASK 0xF0
+#define HWBLKINST_HWBLK_SHIFT 0x04
+
+//ucHWBlock
+#define SELECT_DISP_ENGINE 0
+#define SELECT_DISP_PLL 1
+#define SELECT_DCIO_UNIPHY_LINK0 2
+#define SELECT_DCIO_UNIPHY_LINK1 3
+#define SELECT_DCIO_IMPCAL 4
+#define SELECT_DCIO_DIG 6
+#define SELECT_CRTC_PIXEL_RATE 7
+#define SELECT_VGA_BLK 8
+
+// DIGTransmitterInfoTable structure used to program UNIPHY settings
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
+ USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+ USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
+ USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_1;
+
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
+ USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+ USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
+ USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+ USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
+ USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_2;
+
+
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_3{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
+ USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+ USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
+ USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+ USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
+ USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
+ USHORT usEDPVsLegacyModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP Legacy Mode Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT useDPVsLowVdiffModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP Low VDiff Mode Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT useDPVsHighVdiffModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP High VDiff Mode Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT useDPVsStretchModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP Stretch Mode Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT useDPVsSingleVdiffModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP Single Vdiff Mode Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT useDPVsVariablePremModeOffset; // offset of PHY_ANALOG_SETTING_INFO * with eDP Single Vidff+Variable PreEmphasis Voltage Swing and Pre-Emphasis for each Link clock
+}DIG_TRANSMITTER_INFO_HEADER_V3_3;
+
+
+typedef struct _CLOCK_CONDITION_REGESTER_INFO{
+ USHORT usRegisterIndex;
+ UCHAR ucStartBit;
+ UCHAR ucEndBit;
+}CLOCK_CONDITION_REGESTER_INFO;
+
+typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
+ USHORT usMaxClockFreq;
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ ULONG ulAnalogSetting[1];
+}CLOCK_CONDITION_SETTING_ENTRY;
+
+typedef struct _CLOCK_CONDITION_SETTING_INFO{
+ USHORT usEntrySize;
+ CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
+}CLOCK_CONDITION_SETTING_INFO;
+
+typedef struct _PHY_CONDITION_REG_VAL{
+ ULONG ulCondition;
+ ULONG ulRegVal;
+}PHY_CONDITION_REG_VAL;
+
+typedef struct _PHY_CONDITION_REG_VAL_V2{
+ ULONG ulCondition;
+ UCHAR ucCondition2;
+ ULONG ulRegVal;
+}PHY_CONDITION_REG_VAL_V2;
+
+typedef struct _PHY_CONDITION_REG_INFO{
+ USHORT usRegIndex;
+ USHORT usSize;
+ PHY_CONDITION_REG_VAL asRegVal[1];
+}PHY_CONDITION_REG_INFO;
+
+typedef struct _PHY_CONDITION_REG_INFO_V2{
+ USHORT usRegIndex;
+ USHORT usSize;
+ PHY_CONDITION_REG_VAL_V2 asRegVal[1];
+}PHY_CONDITION_REG_INFO_V2;
+
+typedef struct _PHY_ANALOG_SETTING_INFO{
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ USHORT usSize;
+ PHY_CONDITION_REG_INFO asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO;
+
+typedef struct _PHY_ANALOG_SETTING_INFO_V2{
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ USHORT usSize;
+ PHY_CONDITION_REG_INFO_V2 asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO_V2;
+
+
+typedef struct _GFX_HAVESTING_PARAMETERS {
+ UCHAR ucGfxBlkId; //GFX blk id to be harvested, like CU, RB or PRIM
+ UCHAR ucReserved; //reserved
+ UCHAR ucActiveUnitNumPerSH; //requested active CU/RB/PRIM number per shader array
+ UCHAR ucMaxUnitNumPerSH; //max CU/RB/PRIM number per shader array
+} GFX_HAVESTING_PARAMETERS;
+
+//ucGfxBlkId
+#define GFX_HARVESTING_CU_ID 0
+#define GFX_HARVESTING_RB_ID 1
+#define GFX_HARVESTING_PRIM_ID 2
+
+
+typedef struct _VBIOS_ROM_HEADER{
+ UCHAR PciRomSignature[2];
+ UCHAR ucPciRomSizeIn512bytes;
+ UCHAR ucJumpCoreMainInitBIOS;
+ USHORT usLabelCoreMainInitBIOS;
+ UCHAR PciReservedSpace[18];
+ USHORT usPciDataStructureOffset;
+ UCHAR Rsvd1d_1a[4];
+ char strIbm[3];
+ UCHAR CheckSum[14];
+ UCHAR ucBiosMsgNumber;
+ char str761295520[16];
+ USHORT usLabelCoreVPOSTNoMode;
+ USHORT usSpecialPostOffset;
+ UCHAR ucSpeicalPostImageSizeIn512Bytes;
+ UCHAR Rsved47_45[3];
+ USHORT usROM_HeaderInformationTableOffset;
+ UCHAR Rsved4f_4a[6];
+ char strBuildTimeStamp[20];
+ UCHAR ucJumpCoreXFuncFarHandler;
+ USHORT usCoreXFuncFarHandlerOffset;
+ UCHAR ucRsved67;
+ UCHAR ucJumpCoreVFuncFarHandler;
+ USHORT usCoreVFuncFarHandlerOffset;
+ UCHAR Rsved6d_6b[3];
+ USHORT usATOM_BIOS_MESSAGE_Offset;
+}VBIOS_ROM_HEADER;
+
+/****************************************************************************/
+//Portion VI: Definitinos for vbios MC scratch registers that driver used
+/****************************************************************************/
+
+#define MC_MISC0__MEMORY_TYPE_MASK 0xF0000000
+#define MC_MISC0__MEMORY_TYPE__GDDR1 0x10000000
+#define MC_MISC0__MEMORY_TYPE__DDR2 0x20000000
+#define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000
+#define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000
+#define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000
+#define MC_MISC0__MEMORY_TYPE__HBM 0x60000000
+#define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000
+
+#define ATOM_MEM_TYPE_DDR_STRING "DDR"
+#define ATOM_MEM_TYPE_DDR2_STRING "DDR2"
+#define ATOM_MEM_TYPE_GDDR3_STRING "GDDR3"
+#define ATOM_MEM_TYPE_GDDR4_STRING "GDDR4"
+#define ATOM_MEM_TYPE_GDDR5_STRING "GDDR5"
+#define ATOM_MEM_TYPE_HBM_STRING "HBM"
+#define ATOM_MEM_TYPE_DDR3_STRING "DDR3"
+
+/****************************************************************************/
+//Portion VII: Definitinos being oboselete
+/****************************************************************************/
+
+//==========================================================================================
+//Remove the definitions below when driver is ready!
+typedef struct _ATOM_DAC_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMaxFrequency; // in 10kHz unit
+ USHORT usReserved;
+}ATOM_DAC_INFO;
+
+
+typedef struct _COMPASSIONATE_DATA
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+
+ //============================== DAC1 portion
+ UCHAR ucDAC1_BG_Adjustment;
+ UCHAR ucDAC1_DAC_Adjustment;
+ USHORT usDAC1_FORCE_Data;
+ //============================== DAC2 portion
+ UCHAR ucDAC2_CRT2_BG_Adjustment;
+ UCHAR ucDAC2_CRT2_DAC_Adjustment;
+ USHORT usDAC2_CRT2_FORCE_Data;
+ USHORT usDAC2_CRT2_MUX_RegisterIndex;
+ UCHAR ucDAC2_CRT2_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
+ UCHAR ucDAC2_NTSC_BG_Adjustment;
+ UCHAR ucDAC2_NTSC_DAC_Adjustment;
+ USHORT usDAC2_TV1_FORCE_Data;
+ USHORT usDAC2_TV1_MUX_RegisterIndex;
+ UCHAR ucDAC2_TV1_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
+ UCHAR ucDAC2_CV_BG_Adjustment;
+ UCHAR ucDAC2_CV_DAC_Adjustment;
+ USHORT usDAC2_CV_FORCE_Data;
+ USHORT usDAC2_CV_MUX_RegisterIndex;
+ UCHAR ucDAC2_CV_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
+ UCHAR ucDAC2_PAL_BG_Adjustment;
+ UCHAR ucDAC2_PAL_DAC_Adjustment;
+ USHORT usDAC2_TV2_FORCE_Data;
+}COMPASSIONATE_DATA;
+
+/****************************Supported Device Info Table Definitions**********************/
+// ucConnectInfo:
+// [7:4] - connector type
+// = 1 - VGA connector
+// = 2 - DVI-I
+// = 3 - DVI-D
+// = 4 - DVI-A
+// = 5 - SVIDEO
+// = 6 - COMPOSITE
+// = 7 - LVDS
+// = 8 - DIGITAL LINK
+// = 9 - SCART
+// = 0xA - HDMI_type A
+// = 0xB - HDMI_type B
+// = 0xE - Special case1 (DVI+DIN)
+// Others=TBD
+// [3:0] - DAC Associated
+// = 0 - no DAC
+// = 1 - DACA
+// = 2 - DACB
+// = 3 - External DAC
+// Others=TBD
+//
+
+typedef struct _ATOM_CONNECTOR_INFO
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR bfConnectorType:4;
+ UCHAR bfAssociatedDAC:4;
+#else
+ UCHAR bfAssociatedDAC:4;
+ UCHAR bfConnectorType:4;
+#endif
+}ATOM_CONNECTOR_INFO;
+
+typedef union _ATOM_CONNECTOR_INFO_ACCESS
+{
+ ATOM_CONNECTOR_INFO sbfAccess;
+ UCHAR ucAccess;
+}ATOM_CONNECTOR_INFO_ACCESS;
+
+typedef struct _ATOM_CONNECTOR_INFO_I2C
+{
+ ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+}ATOM_CONNECTOR_INFO_I2C;
+
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
+}ATOM_SUPPORTED_DEVICES_INFO;
+
+#define NO_INT_SRC_MAPPED 0xFF
+
+typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
+{
+ UCHAR ucIntSrcBitmap;
+}ATOM_CONNECTOR_INC_SRC_BITMAP;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+ ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+}ATOM_SUPPORTED_DEVICES_INFO_2;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
+ ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
+}ATOM_SUPPORTED_DEVICES_INFO_2d1;
+
+#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
+
+
+
+typedef struct _ATOM_MISC_CONTROL_INFO
+{
+ USHORT usFrequency;
+ UCHAR ucPLL_ChargePump; // PLL charge-pump gain control
+ UCHAR ucPLL_DutyCycle; // PLL duty cycle control
+ UCHAR ucPLL_VCO_Gain; // PLL VCO gain control
+ UCHAR ucPLL_VoltageSwing; // PLL driver voltage swing control
+}ATOM_MISC_CONTROL_INFO;
+
+
+#define ATOM_MAX_MISC_INFO 4
+
+typedef struct _ATOM_TMDS_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMaxFrequency; // in 10Khz
+ ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
+}ATOM_TMDS_INFO;
+
+
+typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
+{
+ UCHAR ucTVStandard; //Same as TV standards defined above,
+ UCHAR ucPadding[1];
+}ATOM_ENCODER_ANALOG_ATTRIBUTE;
+
+typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
+{
+ UCHAR ucAttribute; //Same as other digital encoder attributes defined above
+ UCHAR ucPadding[1];
+}ATOM_ENCODER_DIGITAL_ATTRIBUTE;
+
+typedef union _ATOM_ENCODER_ATTRIBUTE
+{
+ ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
+ ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
+}ATOM_ENCODER_ATTRIBUTE;
+
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
+{
+ USHORT usPixelClock;
+ USHORT usEncoderID;
+ UCHAR ucDeviceType; //Use ATOM_DEVICE_xxx1_Index to indicate device type only.
+ UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
+ ATOM_ENCODER_ATTRIBUTE usDevAttr;
+}DVO_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
+{
+ DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
+}DVO_ENCODER_CONTROL_PS_ALLOCATION;
+
+
+#define ATOM_XTMDS_ASIC_SI164_ID 1
+#define ATOM_XTMDS_ASIC_SI178_ID 2
+#define ATOM_XTMDS_ASIC_TFP513_ID 3
+#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
+#define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
+#define ATOM_XTMDS_MVPU_FPGA 0x00000004
+
+
+typedef struct _ATOM_XTMDS_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usSingleLinkMaxFrequency;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip
+ UCHAR ucXtransimitterID;
+ UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
+ UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
+ // due to design. This ID is used to alert driver that the sequence is not "standard"!
+ UCHAR ucMasterAddress; // Address to control Master xTMDS Chip
+ UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip
+}ATOM_XTMDS_INFO;
+
+typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
+{
+ UCHAR ucEnable; // ATOM_ENABLE=On or ATOM_DISABLE=Off
+ UCHAR ucDevice; // ATOM_DEVICE_DFP1_INDEX....
+ UCHAR ucPadding[2];
+}DFP_DPMS_STATUS_CHANGE_PARAMETERS;
+
+/****************************Legacy Power Play Table Definitions **********************/
+
+//Definitions for ulPowerPlayMiscInfo
+#define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
+#define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
+#define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
+
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
+
+#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
+
+#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
+#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
+#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
+
+#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
+#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
+#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
+#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
+#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
+#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
+#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
+
+#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
+#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
+#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
+#define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
+#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
+
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
+
+#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
+#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic
+#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic
+#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode
+
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
+#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
+
+#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
+#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
+#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
+#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
+#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
+#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
+#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
+ //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
+#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
+#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
+#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
+
+//ucTableFormatRevision=1
+//ucTableContentRevision=1
+typedef struct _ATOM_POWERMODE_INFO
+{
+ ULONG ulMiscInfo; //The power level should be arranged in ascending order
+ ULONG ulReserved1; // must set to 0
+ ULONG ulReserved2; // must set to 0
+ USHORT usEngineClock;
+ USHORT usMemoryClock;
+ UCHAR ucVoltageDropIndex; // index to GPIO table
+ UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; // number of PCIE lanes
+}ATOM_POWERMODE_INFO;
+
+//ucTableFormatRevision=2
+//ucTableContentRevision=1
+typedef struct _ATOM_POWERMODE_INFO_V2
+{
+ ULONG ulMiscInfo; //The power level should be arranged in ascending order
+ ULONG ulMiscInfo2;
+ ULONG ulEngineClock;
+ ULONG ulMemoryClock;
+ UCHAR ucVoltageDropIndex; // index to GPIO table
+ UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; // number of PCIE lanes
+}ATOM_POWERMODE_INFO_V2;
+
+//ucTableFormatRevision=2
+//ucTableContentRevision=2
+typedef struct _ATOM_POWERMODE_INFO_V3
+{
+ ULONG ulMiscInfo; //The power level should be arranged in ascending order
+ ULONG ulMiscInfo2;
+ ULONG ulEngineClock;
+ ULONG ulMemoryClock;
+ UCHAR ucVoltageDropIndex; // index to Core (VDDC) votage table
+ UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; // number of PCIE lanes
+ UCHAR ucVDDCI_VoltageDropIndex; // index to VDDCI votage table
+}ATOM_POWERMODE_INFO_V3;
+
+
+#define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
+
+#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
+#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
+
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog
+
+
+typedef struct _ATOM_POWERPLAY_INFO
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+}ATOM_POWERPLAY_INFO;
+
+typedef struct _ATOM_POWERPLAY_INFO_V2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+}ATOM_POWERPLAY_INFO_V2;
+
+typedef struct _ATOM_POWERPLAY_INFO_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+}ATOM_POWERPLAY_INFO_V3;
+
+
+
+/**************************************************************************/
+
+
+// Following definitions are for compatiblity issue in different SW components.
+#define ATOM_MASTER_DATA_TABLE_REVISION 0x01
+#define Object_Info Object_Header
+#define AdjustARB_SEQ MC_InitParameter
+#define VRAM_GPIO_DetectionInfo VoltageObjectInfo
+#define ASIC_VDDCI_Info ASIC_ProfilingInfo
+#define ASIC_MVDDQ_Info MemoryTrainingInfo
+#define SS_Info PPLL_SS_Info
+#define ASIC_MVDDC_Info ASIC_InternalSS_Info
+#define DispDevicePriorityInfo SaveRestoreInfo
+#define DispOutInfo TV_VideoMode
+
+
+#define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
+#define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
+
+//New device naming, remove them when both DAL/VBIOS is ready
+#define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
+#define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
+
+#define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
+#define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
+
+#define ATOM_DEVICE_DFP2I_INDEX 0x00000009
+#define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
+
+#define ATOM_S0_DFP1I ATOM_S0_DFP1
+#define ATOM_S0_DFP1X ATOM_S0_DFP2
+
+#define ATOM_S0_DFP2I 0x00200000L
+#define ATOM_S0_DFP2Ib2 0x20
+
+#define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
+#define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
+
+#define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
+#define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
+
+#define ATOM_S3_DFP2I_ACTIVEb1 0x02
+
+#define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
+#define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
+
+#define ATOM_S3_DFP2I_ACTIVE 0x00000200L
+
+#define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
+#define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
+#define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
+
+
+#define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
+#define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
+
+#define ATOM_S5_DOS_REQ_DFP2I 0x0200
+#define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
+#define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
+
+#define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
+#define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
+
+#define TMDS1XEncoderControl DVOEncoderControl
+#define DFP1XOutputControl DVOOutputControl
+
+#define ExternalDFPOutputControl DFP1XOutputControl
+#define EnableExternalTMDS_Encoder TMDS1XEncoderControl
+
+#define DFP1IOutputControl TMDSAOutputControl
+#define DFP2IOutputControl LVTMAOutputControl
+
+#define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define ucDac1Standard ucDacStandard
+#define ucDac2Standard ucDacStandard
+
+#define TMDS1EncoderControl TMDSAEncoderControl
+#define TMDS2EncoderControl LVTMAEncoderControl
+
+#define DFP1OutputControl TMDSAOutputControl
+#define DFP2OutputControl LVTMAOutputControl
+#define CRT1OutputControl DAC1OutputControl
+#define CRT2OutputControl DAC2OutputControl
+
+//These two lines will be removed for sure in a few days, will follow up with Michael V.
+#define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
+#define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
+#define ATOM_S2_LCD1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
+#define ATOM_S2_TV1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
+#define ATOM_S2_DFP1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
+#define ATOM_S2_CRT2_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
+
+#define ATOM_S6_ACC_REQ_TV2 0x00400000L
+#define ATOM_DEVICE_TV2_INDEX 0x00000006
+#define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX)
+#define ATOM_S0_TV2 0x00100000L
+#define ATOM_S3_TV2_ACTIVE ATOM_S3_DFP6_ACTIVE
+#define ATOM_S3_TV2_CRTC_ACTIVE ATOM_S3_DFP6_CRTC_ACTIVE
+
+/*********************************************************************************/
+
+#pragma pack() // BIOS data must use byte aligment
+
+#pragma pack(1)
+
+typedef struct _ATOM_HOLE_INFO
+{
+ USHORT usOffset; // offset of the hole ( from the start of the binary )
+ USHORT usLength; // length of the hole ( in bytes )
+}ATOM_HOLE_INFO;
+
+typedef struct _ATOM_SERVICE_DESCRIPTION
+{
+ UCHAR ucRevision; // Holes set revision
+ UCHAR ucAlgorithm; // Hash algorithm
+ UCHAR ucSignatureType; // Signature type ( 0 - no signature, 1 - test, 2 - production )
+ UCHAR ucReserved;
+ USHORT usSigOffset; // Signature offset ( from the start of the binary )
+ USHORT usSigLength; // Signature length
+}ATOM_SERVICE_DESCRIPTION;
+
+
+typedef struct _ATOM_SERVICE_INFO
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ATOM_SERVICE_DESCRIPTION asDescr;
+ UCHAR ucholesNo; // number of holes that follow
+ ATOM_HOLE_INFO holes[1]; // array of hole descriptions
+}ATOM_SERVICE_INFO;
+
+
+
+#pragma pack() // BIOS data must use byte aligment
+
+//
+// AMD ACPI Table
+//
+#pragma pack(1)
+
+typedef struct {
+ ULONG Signature;
+ ULONG TableLength; //Length
+ UCHAR Revision;
+ UCHAR Checksum;
+ UCHAR OemId[6];
+ UCHAR OemTableId[8]; //UINT64 OemTableId;
+ ULONG OemRevision;
+ ULONG CreatorId;
+ ULONG CreatorRevision;
+} AMD_ACPI_DESCRIPTION_HEADER;
+/*
+//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
+typedef struct {
+ UINT32 Signature; //0x0
+ UINT32 Length; //0x4
+ UINT8 Revision; //0x8
+ UINT8 Checksum; //0x9
+ UINT8 OemId[6]; //0xA
+ UINT64 OemTableId; //0x10
+ UINT32 OemRevision; //0x18
+ UINT32 CreatorId; //0x1C
+ UINT32 CreatorRevision; //0x20
+}EFI_ACPI_DESCRIPTION_HEADER;
+*/
+typedef struct {
+ AMD_ACPI_DESCRIPTION_HEADER SHeader;
+ UCHAR TableUUID[16]; //0x24
+ ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
+ ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+ ULONG Reserved[4]; //0x3C
+}UEFI_ACPI_VFCT;
+
+typedef struct {
+ ULONG PCIBus; //0x4C
+ ULONG PCIDevice; //0x50
+ ULONG PCIFunction; //0x54
+ USHORT VendorID; //0x58
+ USHORT DeviceID; //0x5A
+ USHORT SSVID; //0x5C
+ USHORT SSID; //0x5E
+ ULONG Revision; //0x60
+ ULONG ImageLength; //0x64
+}VFCT_IMAGE_HEADER;
+
+
+typedef struct {
+ VFCT_IMAGE_HEADER VbiosHeader;
+ UCHAR VbiosContent[1];
+}GOP_VBIOS_CONTENT;
+
+typedef struct {
+ VFCT_IMAGE_HEADER Lib1Header;
+ UCHAR Lib1Content[1];
+}GOP_LIB1_CONTENT;
+
+#pragma pack()
+
+
+#endif /* _ATOMBIOS_H */
+
+#include "pptable.h"
+
diff --git a/drivers/gpu/drm/amd/amdgpu/pptable.h b/drivers/gpu/drm/amd/amdgpu/pptable.h
new file mode 100644
index 0000000..0030f72
--- /dev/null
+++ b/drivers/gpu/drm/amd/amdgpu/pptable.h
@@ -0,0 +1,698 @@
+/*
+ * Copyright 2013 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _PPTABLE_H
+#define _PPTABLE_H
+
+#pragma pack(1)
+
+typedef struct _ATOM_PPLIB_THERMALCONTROLLER
+
+{
+ UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_*
+ UCHAR ucI2cLine; // as interpreted by DAL I2C
+ UCHAR ucI2cAddress;
+ UCHAR ucFanParameters; // Fan Control Parameters.
+ UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only.
+ UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only.
+ UCHAR ucReserved; // ----
+ UCHAR ucFlags; // to be defined
+} ATOM_PPLIB_THERMALCONTROLLER;
+
+#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f
+#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller.
+
+#define ATOM_PP_THERMALCONTROLLER_NONE 0
+#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_LM64 5
+#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_RV6xx 7
+#define ATOM_PP_THERMALCONTROLLER_RV770 8
+#define ATOM_PP_THERMALCONTROLLER_ADT7473 9
+#define ATOM_PP_THERMALCONTROLLER_KONG 10
+#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11
+#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12
+#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen.
+#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally
+#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15
+#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16
+#define ATOM_PP_THERMALCONTROLLER_LM96163 17
+#define ATOM_PP_THERMALCONTROLLER_CISLANDS 18
+#define ATOM_PP_THERMALCONTROLLER_KAVERI 19
+
+
+// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal.
+// We probably should reserve the bit 0x80 for this use.
+// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here).
+// The driver can pick the correct internal controller based on the ASIC.
+
+#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller
+#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller
+
+typedef struct _ATOM_PPLIB_STATE
+{
+ UCHAR ucNonClockStateIndex;
+ UCHAR ucClockStateIndices[1]; // variable-sized
+} ATOM_PPLIB_STATE;
+
+
+typedef struct _ATOM_PPLIB_FANTABLE
+{
+ UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same.
+ UCHAR ucTHyst; // Temperature hysteresis. Integer.
+ USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
+ USHORT usTMed; // The middle temperature where we change slopes.
+ USHORT usTHigh; // The high point above TMed for adjusting the second slope.
+ USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments).
+ USHORT usPWMMed; // The PWM value (in percent) at TMed.
+ USHORT usPWMHigh; // The PWM value at THigh.
+} ATOM_PPLIB_FANTABLE;
+
+typedef struct _ATOM_PPLIB_FANTABLE2
+{
+ ATOM_PPLIB_FANTABLE basicTable;
+ USHORT usTMax; // The max temperature
+} ATOM_PPLIB_FANTABLE2;
+
+typedef struct _ATOM_PPLIB_FANTABLE3
+{
+ ATOM_PPLIB_FANTABLE2 basicTable2;
+ UCHAR ucFanControlMode;
+ USHORT usFanPWMMax;
+ USHORT usFanOutputSensitivity;
+} ATOM_PPLIB_FANTABLE3;
+
+typedef struct _ATOM_PPLIB_EXTENDEDHEADER
+{
+ USHORT usSize;
+ ULONG ulMaxEngineClock; // For Overdrive.
+ ULONG ulMaxMemoryClock; // For Overdrive.
+ // Add extra system parameters here, always adjust size to include all fields.
+ USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table
+ USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table
+ USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table
+ USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table
+ USHORT usACPTableOffset; //points to ATOM_PPLIB_ACP_Table
+ /* points to ATOM_PPLIB_POWERTUNE_Table */
+ USHORT usPowerTuneTableOffset;
+ /* points to ATOM_PPLIB_CLOCK_Voltage_Dependency_Table for sclkVddgfxTable */
+ USHORT usSclkVddgfxTableOffset;
+} ATOM_PPLIB_EXTENDEDHEADER;
+
+//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
+#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
+#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
+#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
+#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
+#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
+#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
+#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
+#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
+#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
+#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
+#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
+#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
+#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
+#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition.
+#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
+#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC.
+#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature.
+#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state.
+#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE 0x00040000 // Does the driver supports new CAC voltage table.
+#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY 0x00080000 // Does the driver supports revert GPIO5 polarity.
+#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17 0x00100000 // Does the driver supports thermal2GPIO17.
+#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE 0x00200000 // Does the driver supports VR HOT GPIO Configurable.
+#define ATOM_PP_PLATFORM_CAP_TEMP_INVERSION 0x00400000 // Does the driver supports Temp Inversion feature.
+#define ATOM_PP_PLATFORM_CAP_EVV 0x00800000
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+
+ UCHAR ucDataRevision;
+
+ UCHAR ucNumStates;
+ UCHAR ucStateEntrySize;
+ UCHAR ucClockInfoSize;
+ UCHAR ucNonClockSize;
+
+ // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
+ USHORT usStateArrayOffset;
+
+ // offset from start of this table to array of ASIC-specific structures,
+ // currently ATOM_PPLIB_CLOCK_INFO.
+ USHORT usClockInfoArrayOffset;
+
+ // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO
+ USHORT usNonClockInfoArrayOffset;
+
+ USHORT usBackbiasTime; // in microseconds
+ USHORT usVoltageTime; // in microseconds
+ USHORT usTableSize; //the size of this structure, or the extended structure
+
+ ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_*
+
+ ATOM_PPLIB_THERMALCONTROLLER sThermalController;
+
+ USHORT usBootClockInfoOffset;
+ USHORT usBootNonClockInfoOffset;
+
+} ATOM_PPLIB_POWERPLAYTABLE;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE2
+{
+ ATOM_PPLIB_POWERPLAYTABLE basicTable;
+ UCHAR ucNumCustomThermalPolicy;
+ USHORT usCustomThermalPolicyArrayOffset;
+}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE3
+{
+ ATOM_PPLIB_POWERPLAYTABLE2 basicTable2;
+ USHORT usFormatID; // To be used ONLY by PPGen.
+ USHORT usFanTableOffset;
+ USHORT usExtendendedHeaderOffset;
+} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE4
+{
+ ATOM_PPLIB_POWERPLAYTABLE3 basicTable3;
+ ULONG ulGoldenPPID; // PPGen use only
+ ULONG ulGoldenRevision; // PPGen use only
+ USHORT usVddcDependencyOnSCLKOffset;
+ USHORT usVddciDependencyOnMCLKOffset;
+ USHORT usVddcDependencyOnMCLKOffset;
+ USHORT usMaxClockVoltageOnDCOffset;
+ USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table
+ USHORT usMvddDependencyOnMCLKOffset;
+} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE5
+{
+ ATOM_PPLIB_POWERPLAYTABLE4 basicTable4;
+ ULONG ulTDPLimit;
+ ULONG ulNearTDPLimit;
+ ULONG ulSQRampingThreshold;
+ USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table
+ ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table
+ USHORT usTDPODLimit;
+ USHORT usLoadLineSlope; // in milliOhms * 100
+} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5;
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification
+#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007
+#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0
+#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0
+#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1
+#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3
+#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5
+// 2, 4, 6, 7 are reserved
+
+#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008
+#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010
+#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020
+#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040
+#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080
+#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100
+#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200
+#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400
+#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800
+#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000
+#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000
+#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000
+#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2
+#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001
+#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002
+#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D)
+
+//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings
+#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001
+#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002
+
+// 0 is 2.5Gb/s, 1 is 5Gb/s
+#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004
+#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2
+
+// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3
+
+// lookup into reduced refresh-rate table
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8
+
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1
+// 2-15 TBD as needed.
+
+#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000
+#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000
+
+#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000
+
+#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000
+
+//memory related flags
+#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000
+
+//M3 Arb //2bits, current 3 sets of parameters in total
+#define ATOM_PPLIB_M3ARB_MASK 0x00060000
+#define ATOM_PPLIB_M3ARB_SHIFT 17
+
+#define ATOM_PPLIB_ENABLE_DRR 0x00080000
+
+// remaining 16 bits are reserved
+typedef struct _ATOM_PPLIB_THERMAL_STATE
+{
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucThermalAction;
+}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex
+#define ATOM_PPLIB_NONCLOCKINFO_VER1 12
+#define ATOM_PPLIB_NONCLOCKINFO_VER2 24
+typedef struct _ATOM_PPLIB_NONCLOCK_INFO
+{
+ USHORT usClassification;
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ ULONG ulCapsAndSettings;
+ UCHAR ucRequiredPower;
+ USHORT usClassification2;
+ ULONG ulVCLK;
+ ULONG ulDCLK;
+ UCHAR ucUnused[5];
+} ATOM_PPLIB_NONCLOCK_INFO;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE::ucClockStateIndices
+typedef struct _ATOM_PPLIB_R600_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usUnused1;
+ USHORT usUnused2;
+
+ ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_R600_CLOCK_INFO;
+
+// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO
+#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1
+#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2
+#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16
+#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0).
+
+typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
+
+{
+ USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600).
+ UCHAR ucLowEngineClockHigh;
+ USHORT usHighEngineClockLow; // High Engine clock in MHz.
+ UCHAR ucHighEngineClockHigh;
+ USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
+ UCHAR ucMemoryClockHigh; // Currentyl unused.
+ UCHAR ucPadding; // For proper alignment and size.
+ USHORT usVDDC; // For the 780, use: None, Low, High, Variable
+ UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
+ UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could
+ USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
+ ULONG ulFlags;
+} ATOM_PPLIB_RS780_CLOCK_INFO;
+
+#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0
+#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1
+#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2
+#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3
+
+#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is.
+#define ATOM_PPLIB_RS780_SPMCLK_LOW 1
+#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2
+
+#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0
+#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1
+#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2
+
+typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usVDDCI;
+ USHORT usUnused;
+
+ ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_EVERGREEN_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SI_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usVDDCI;
+ UCHAR ucPCIEGen;
+ UCHAR ucUnused1;
+
+ ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now
+
+} ATOM_PPLIB_SI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_CI_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ UCHAR ucPCIEGen;
+ USHORT usPCIELane;
+} ATOM_PPLIB_CI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{
+ USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz
+ UCHAR ucEngineClockHigh; //clockfrequency >> 16.
+ UCHAR vddcIndex; //2-bit vddc index;
+ USHORT tdpLimit;
+ //please initalize to 0
+ USHORT rsv1;
+ //please initialize to 0s
+ ULONG rsv2[2];
+}ATOM_PPLIB_SUMO_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_CZ_CLOCK_INFO {
+ UCHAR index;
+ UCHAR rsv[3];
+} ATOM_PPLIB_CZ_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_STATE_V2
+{
+ //number of valid dpm levels in this state; Driver uses it to calculate the whole
+ //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR)
+ UCHAR ucNumDPMLevels;
+
+ //a index to the array of nonClockInfos
+ UCHAR nonClockInfoIndex;
+ /**
+ * Driver will read the first ucNumDPMLevels in this array
+ */
+ UCHAR clockInfoIndex[1];
+} ATOM_PPLIB_STATE_V2;
+
+typedef struct _StateArray{
+ //how many states we have
+ UCHAR ucNumEntries;
+
+ ATOM_PPLIB_STATE_V2 states[1];
+}StateArray;
+
+
+typedef struct _ClockInfoArray{
+ //how many clock levels we have
+ UCHAR ucNumEntries;
+
+ //sizeof(ATOM_PPLIB_CLOCK_INFO)
+ UCHAR ucEntrySize;
+
+ UCHAR clockInfo[1];
+}ClockInfoArray;
+
+typedef struct _NonClockInfoArray{
+
+ //how many non-clock levels we have. normally should be same as number of states
+ UCHAR ucNumEntries;
+ //sizeof(ATOM_PPLIB_NONCLOCK_INFO)
+ UCHAR ucEntrySize;
+
+ ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1];
+}NonClockInfoArray;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record
+{
+ USHORT usClockLow;
+ UCHAR ucClockHigh;
+ USHORT usVoltage;
+}ATOM_PPLIB_Clock_Voltage_Dependency_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Dependency_Table;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record
+{
+ USHORT usSclkLow;
+ UCHAR ucSclkHigh;
+ USHORT usMclkLow;
+ UCHAR ucMclkHigh;
+ USHORT usVddc;
+ USHORT usVddci;
+}ATOM_PPLIB_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Limit_Table;
+
+union _ATOM_PPLIB_CAC_Leakage_Record
+{
+ struct
+ {
+ USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. in CI we read it as StdVoltageHiSidd
+ ULONG ulLeakageValue; // For CI and newer we use this as the "fake" standar VDDC value. in CI we read it as StdVoltageLoSidd
+
+ };
+ struct
+ {
+ USHORT usVddc1;
+ USHORT usVddc2;
+ USHORT usVddc3;
+ };
+};
+
+typedef union _ATOM_PPLIB_CAC_Leakage_Record ATOM_PPLIB_CAC_Leakage_Record;
+
+typedef struct _ATOM_PPLIB_CAC_Leakage_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_CAC_Leakage_Table;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record
+{
+ USHORT usVoltage;
+ USHORT usSclkLow;
+ UCHAR ucSclkHigh;
+ USHORT usMclkLow;
+ UCHAR ucMclkHigh;
+}ATOM_PPLIB_PhaseSheddingLimits_Record;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_PhaseSheddingLimits_Table;
+
+typedef struct _VCEClockInfo{
+ USHORT usEVClkLow;
+ UCHAR ucEVClkHigh;
+ USHORT usECClkLow;
+ UCHAR ucECClkHigh;
+}VCEClockInfo;
+
+typedef struct _VCEClockInfoArray{
+ UCHAR ucNumEntries;
+ VCEClockInfo entries[1];
+}VCEClockInfoArray;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ UCHAR ucVCEClockInfoIndex;
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_VCE_State_Record
+{
+ UCHAR ucVCEClockInfoIndex;
+ UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary
+}ATOM_PPLIB_VCE_State_Record;
+
+typedef struct _ATOM_PPLIB_VCE_State_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_VCE_State_Record entries[1];
+}ATOM_PPLIB_VCE_State_Table;
+
+
+typedef struct _ATOM_PPLIB_VCE_Table
+{
+ UCHAR revid;
+// VCEClockInfoArray array;
+// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits;
+// ATOM_PPLIB_VCE_State_Table states;
+}ATOM_PPLIB_VCE_Table;
+
+
+typedef struct _UVDClockInfo{
+ USHORT usVClkLow;
+ UCHAR ucVClkHigh;
+ USHORT usDClkLow;
+ UCHAR ucDClkHigh;
+}UVDClockInfo;
+
+typedef struct _UVDClockInfoArray{
+ UCHAR ucNumEntries;
+ UVDClockInfo entries[1];
+}UVDClockInfoArray;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ UCHAR ucUVDClockInfoIndex;
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_UVD_Table
+{
+ UCHAR revid;
+// UVDClockInfoArray array;
+// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits;
+}ATOM_PPLIB_UVD_Table;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ USHORT usSAMClockLow;
+ UCHAR ucSAMClockHigh;
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{
+ UCHAR numEntries;
+ ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_SAMU_Table
+{
+ UCHAR revid;
+ ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_SAMU_Table;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ USHORT usACPClockLow;
+ UCHAR ucACPClockHigh;
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Table{
+ UCHAR numEntries;
+ ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_ACP_Table
+{
+ UCHAR revid;
+ ATOM_PPLIB_ACPClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_ACP_Table;
+
+typedef struct _ATOM_PowerTune_Table{
+ USHORT usTDP;
+ USHORT usConfigurableTDP;
+ USHORT usTDC;
+ USHORT usBatteryPowerLimit;
+ USHORT usSmallPowerLimit;
+ USHORT usLowCACLeakage;
+ USHORT usHighCACLeakage;
+}ATOM_PowerTune_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table
+{
+ UCHAR revid;
+ ATOM_PowerTune_Table power_tune_table;
+}ATOM_PPLIB_POWERTUNE_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table_V1
+{
+ UCHAR revid;
+ ATOM_PowerTune_Table power_tune_table;
+ USHORT usMaximumPowerDeliveryLimit;
+ USHORT usReserve[7];
+} ATOM_PPLIB_POWERTUNE_Table_V1;
+
+#define ATOM_PPM_A_A 1
+#define ATOM_PPM_A_I 2
+typedef struct _ATOM_PPLIB_PPM_Table
+{
+ UCHAR ucRevId;
+ UCHAR ucPpmDesign; //A+I or A+A
+ USHORT usCpuCoreNumber;
+ ULONG ulPlatformTDP;
+ ULONG ulSmallACPlatformTDP;
+ ULONG ulPlatformTDC;
+ ULONG ulSmallACPlatformTDC;
+ ULONG ulApuTDP;
+ ULONG ulDGpuTDP;
+ ULONG ulDGpuUlvPower;
+ ULONG ulTjmax;
+} ATOM_PPLIB_PPM_Table;
+
+#pragma pack()
+
+#endif
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
